Transient Voltage Suppression Diodes Surface Mount - 3000W > SMDJ-HR series RoHS SMDJ-HR Series Description The SMDJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Agency Approvals AGENCY AGENCY FILE NUMBER E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation at TA=25C by 10x1000s waveform (Fig.1)(Note 1), (Note 2) PPPM 3000 W Power Dissipation on infinite heat sink at TA=50OC PM(AV) 6.5 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 300 A Maximum Instantaneous Forward Voltage at 100A for Unidirectional only VF 3.5 V TJ , TSTG -65 to 150 C Typical Thermal Resistance Junction to Lead RuJL 15 C/W Typical Thermal Resistance Junction to Ambient RuJA 75 C/W Operating Junction and Storage Temperature Range * Fast response time: typically less than 1.0ps from 0V to BV min * Excellent clamping capability * Low incremental surge resistance * Typical IR less than 2A above 12V * High Temperature VBR = 0.1% x VBR@25C x T soldering guaranteed: * Glass passivated chip 260C/40 seconds at junction terminals * 3000W peak pulse power * Plastic package has capability at 10x1000s Underwriters Laboratory waveform, repetition rate Flammability 94V-O (duty cycles):0.01% * Matte Tin Lead-free Plated * Halogen-Free * RoHS compliant * For surface mounted applications in order to optimize board space * Low profile package * Built-in strain relief * Typical maximum temperature coefficient Applications TVS devices are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2. 2. Mounted on copper pad area of 0.31x0.31" (8.0 x 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. SMDJ-HR Series 293 Revision: August 01, 2011, 16:54 (c)2011 Littelfuse, Inc. Specifications are subject to change without notice. Transient Voltage Suppression Diodes Surface Mount - 3000W > SMDJ-HR series Electrical Characteristics Test Maximum Maximum Maximum Agency Peak Reverse Current Clamping Approval Voltage VC Pulse Leakage IR IT @ Ipp Current Ipp @ VR (mA) (V) (A) (A) UNI BI Reverse Stand off Voltage VR (Volts) RDE RDG RDK PDM PDP PDR PDT PDV PDX PDZ PEE PEG PEK PEM PEP PER PET PEV PEX PEZ PFE PFG PFK PFM PFP PFR PFT PFV PFX PFZ RGE PGG PGK PGM DDE DDG DDK DDM DDP DDR DDT DDV DDX DDZ DEE DEG DEK DEM DEP DER DET DEV DEX DEZ DFE DFG DFK DFM DFP DFR DFT DFV DFX DFZ DGE DGG - 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 - PGP - 70.0 77.80 86.00 1 113.0 26.5 2 X - PGR PGT PGV PGX PGZ PHE PHG PHK PHM PHP PHR - 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 160.0 170.0 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 167.00 178.00 189.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 197.00 209.00 1 1 1 1 1 1 1 1 1 1 1 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 24.8 23.8 21.9 20.5 18.5 16.9 15.5 14.4 12.3 11.6 10.9 2 2 2 2 2 2 2 2 2 2 2 X X X X X X X X X X X Part Number (Uni) Part Number (Bi) *SMDJ5.0A-HR *SMDJ6.0A-HR *SMDJ6.5A-HR *SMDJ7.0A-HR *SMDJ7.5A-HR *SMDJ8.0A-HR *SMDJ8.5A-HR *SMDJ9.0A-HR *SMDJ10A-HR *SMDJ11A-HR *SMDJ12A-HR *SMDJ13A-HR *SMDJ14A-HR *SMDJ15A-HR *SMDJ16A-HR *SMDJ17A-HR *SMDJ18A-HR *SMDJ20A-HR *SMDJ22A-HR *SMDJ24A-HR *SMDJ26A-HR *SMDJ28A-HR SMDJ30A-HR *SMDJ33A-HR *SMDJ36A-HR *SMDJ40A-HR *SMDJ43A-HR *SMDJ45A-HR *SMDJ48A-HR *SMDJ51A-HR SMDJ54A-HR *SMDJ58A-HR *SMDJ60A-HR *SMDJ64A-HR *SMDJ5.0CA-HR SMDJ6.0CA-HR *SMDJ6.5CA-HR *SMDJ7.0CA-HR *SMDJ7.5CA-HR *SMDJ8.0CA-HR *SMDJ8.5CA-HR SMDJ9.0CA-HR *SMDJ10CA-HR *SMDJ11CA-HR SMDJ12CA-HR *SMDJ13CA-HR *SMDJ14CA-HR SMDJ15CA-HR *SMDJ16CA-HR *SMDJ17CA-HR SMDJ18CA-HR *SMDJ20CA-HR *SMDJ22CA-HR *SMDJ24CA-HR *SMDJ26CA-HR *SMDJ28CA-HR *SMDJ30CA-HR *SMDJ33CA-HR SMDJ36CA-HR SMDJ40CA-HR *SMDJ43CA-HR *SMDJ45CA-HR *SMDJ48CA-HR SMDJ51CA-HR *SMDJ54CA-HR SMDJ58CA-HR - *SMDJ70A-HR *SMDJ75A-HR *SMDJ78A-HR SMDJ85A-HR *SMDJ90A-HR *SMDJ100A-HR *SMDJ110A-HR *SMDJ120A-HR *SMDJ130A-HR *SMDJ150A-HR *SMDJ160A-HR *SMDJ170A-HR Marking Breakdown Voltage VBR (Volts) @ IT MIN MAX 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 326.1 291.3 267.9 250.0 232.6 220.6 208.3 194.8 176.5 164.8 150.8 139.5 129.3 123.0 115.4 108.7 102.7 92.6 84.5 77.1 71.3 66.1 62.0 56.3 51.6 46.5 43.2 41.3 38.8 36.4 34.4 32.1 31.0 29.1 800 800 500 200 100 50 20 10 5 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Note: 1. For bidirectional type having VR of 10 volts and less, the IR limit is double. 2. 100% High Temperature Storage Life test and Reflow Simulation. 3. 100% HTRB(High Temperature Reverse Bias). For Unidirectional, 150C/VR/24hours, for Bidirectional, 150C/ VR /48hrs(24hours for each direction for Bidirectional). 4. Parts with "*" will be available upon request. SMDJ-HR Series 294 Revision: August 01, 2011, 16:54 (c)2011 Littelfuse, Inc. Specifications are subject to change without notice. X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Transient Voltage Suppression Diodes Surface Mount - 3000W > SMDJ-HR series Ratings and Characteristic Curves (T =25C unless otherwise noted) A Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Peak Pulse Power 100 Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % PPPM-Peak Pulse Power (KW) 1000 100 10 1 0.31x0.31" (8.0x8.0mm) Copper Pad Area 0.1 0.001 0.01 40 Average Power 20 0 0 25 100 125 150 175 100000 tr=10sec TJ=25C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Half Value IPPM IPPM ( ) 2 50 Bi-directional V= OV 10000 Cj (pF) Peak Value IPPM 100 Uni-directional V= OV 1000 Uni-directional @ VR 100 10/1000sec. Waveform as defined by R.E.A Bi-directional @ VR 10 0 td 1.0 0 2.0 3.0 1 1.0 4.0 10.0 100.0 1000.0 VBR - Reverse Breakdown Voltage (V) t-Time (ms) Figure 6 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional only Figure 5 - Steady State Power Derating Curve 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 350 IFSM - Peak Forward Surge Current (A) PM(AV), Steady Sate Power Dissipation (W) 75 Figure 4 - Typical Junction Capacitance 150 0 25 50 75 100 125 150 175 TA - Ambient Temperature(C) SMDJ-HR Series 50 Tj - initial temperature (C) Figure 3 - Pulse Waveform IPPM- Peak Pulse Current, % IRSM 60 50 10 0.1 1 td-Pulse Width (ms) Peak Pluse Power (Single Pluse) 80 300 250 200 150 100 50 0 1 10 100 Number of Cycles at 60 Hz 295 Revision: August 01, 2011, 16:54 (c)2011 Littelfuse, Inc. Specifications are subject to change without notice. Transient Voltage Suppression Diodes Surface Mount - 3000W > SMDJ-HR series Soldering Parameters Lead-free assembly Pre Heat - Temperature Min (Ts(min)) 150C - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) 60 - 180 secs Ramp-up TL Average ramp up rate (Liquidus Temp (TL) to peak 3C/second max TS(max) to TL - Ramp-up Rate 3C/second max Reflow - Temperature (TL) (Liquidus) 217C - Time (min to max) (ts) 60 - 150 seconds Peak Temperature (TP) 260 20 - 40 seconds Critical Zone TL to TP tL Ts(max) Ramp-down Ts(min) ts Preheat 25C Time within 5C of actual peak Temperature (tp) +0/-5 tp TP Temperature (T) Reflow Condition t 25C to Peak Time (t) C Ramp-down Rate 6C/second max Time 25C to peak Temperature (TP) 8 minutes Max. Do not exceed 280C Physical Specifications Environmental Specifications Weight 0.007 ounce, 0.21 grams Temperature Cycle JESD22-A104 Case JEDEC DO214AB. Molded plastic body over glass passivated junction Pressure Cooker JESD 22-A102 Polarity Color band denotes positive end (cathode) except Bidirectional. High Temp. Storage JESD22-A103 Terminal Matte Tin-plated leads, Solderable per JESD22-B102D HTRB JESD22-A108 Thermal Shock JESD22-A106 Dimensions DO-214AB (SMC J-Bend) Dimensions Cathode Band C A B H D F E G Dimensions in inches and (millimeters) J K L I SMDJ-HR Series Solder Pads (all dimensions in mm) 296 Revision: August 01, 2011, 16:54 Inches Min Millimeters Max Min Max A 0.114 0.126 2.900 3.200 B 0.260 0.280 6.600 7.110 C 0.220 0.245 5.590 6.220 D 0.079 0.103 2.060 2.620 E 0.030 0.060 0.760 1.520 F - 0.008 - 0.203 G 0.305 0.320 7.750 8.130 H 0.006 0.012 0.152 0.305 I 0.129 - 3.300 - J 0.094 - 2.400 - K - 0.165 L 0.094 - 4.200 2.400 (c)2011 Littelfuse, Inc. Specifications are subject to change without notice. - Transient Voltage Suppression Diodes Surface Mount - 3000W > SMDJ-HR series Part Numbering System SMDJ Part Marking System Cathode Band XXX C A -HR F XXX XXXXX High Reliability 5% VOLTAGE TOLERANCE BI-DIRECTIONAL VOLTAGE SERIES Littelfuse Logo Marking Code Date Code Packaging Part number Component Package SMDJxxxXX-HR DO-214AB SMDJ-HR Series Quantity 3000 Packaging Option Tape & Reel - 16mm/13" tape 297 Revision: August 01, 2011, 16:54 Packaging Specification EIA STD RS-481 (c)2011 Littelfuse, Inc. Specifications are subject to change without notice.