Revision: August 01, 2011, 16:54
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Transient Voltage Suppression Diodes
293
Surface Mount – 3000W > SMDJ-HR series
SMDJ-HR Series
AGENCY AGENCY FILE NUMBER
E230531
SMDJ-HR Series
The SMDJ-HR High Reliability series is designed
specifically to protect sensitive electronic equipment from
voltage transients induced by lightning and other transient
voltage events.
Description
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Agency Approvals
Parameter Symbol Value Unit
Peak Pulse Power Dissipation at
TA=25ºC by 10x1000µs waveform
(Fig.1)(Note 1), (Note 2)
PPPM 3000 W
Power Dissipation on infinite heat
sink at TA=50OCPM(AV) 6.5 W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3) IFSM 300 A
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only
VF3.5 V
Operating Junction and Storage
Temperature Range TJ, TSTG -65 to 150 °C
Typical Thermal Resistance Junction
to Lead RuJL 15 °C/W
Typical Thermal Resistance Junction
to Ambient RuJA 75 °C/W
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
TVS devices are ideal for the protection of I/O Interfaces,
VCC bus and other vulnerable circuits used in Telecom,
Computer, Industrial and Consumer electronic applications.
Applications
Features
• Halogen-Free
• RoHS compliant
• For surface mounted
applications in order to
optimize board space
• Low prole package
• Built-in strain relief
• Typical maximum
temperature coefficient
ΔVBR = 0.1% x VBR@25°C x ΔT
• Glass passivated chip
junction
• 3000W peak pulse power
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
• Fast response time:
typically less than 1.0ps
from 0V to BV min
• Excellent clamping
capability
• Low incremental surge
resistance
• Typical IR less than 2µA
above 12V
• High Temperature
soldering guaranteed:
260°C/40 seconds at
terminals
• Plastic package has
Underwriters Laboratory
Flammability 94V-O
• Matte Tin Lead–free Plated
RoHS
Revision: August 01, 2011, 16:54
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Transient Voltage Suppression Diodes
294
Surface Mount – 3000W > SMDJ-HR series
SMDJ-HR Series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
Marking
Reverse
Stand off
Voltage
VR
(Volts)
Breakdown
Voltage VBR
(Volts) @ IT
Test
Current
IT
(mA)
Maximum
Clamping
Voltage VC
@ Ipp
(V)
Maximum
Peak
Pulse
Current Ipp
(A)
Maximum
Reverse
Leakage IR
@ VR
(µA)
Agency
Approval
UNI BI MIN MAX
*SMDJ5.0A-HR *SMDJ5.0CA-HR RDE DDE 5.0 6.40 7. 0 0 10 9.2 326.1 800 X
*SMDJ6.0A-HR SMDJ6.0CA-HR RDG DDG 6.0 6.67 7.37 10 10.3 291.3 800 X
*SMDJ6.5A-HR *SMDJ6.5CA-HR RDK DDK 6.5 7.22 7.98 10 11. 2 267.9 500 X
*SMDJ7.0A-HR *SMDJ7.0CA-HR PDM DDM 7. 0 7.78 8.60 10 12.0 250.0 200 X
*SMDJ7.5A-HR *SMDJ7.5CA-HR PDP DDP 7. 5 8.33 9.21 1 12.9 232.6 100 X
*SMDJ8.0A-HR *SMDJ8.0CA-HR PDR DDR 8.0 8.89 9.83 1 13.6 220.6 50 X
*SMDJ8.5A-HR *SMDJ8.5CA-HR PDT DDT 8.5 9.44 10.40 1 14.4 208.3 20 X
*SMDJ9.0A-HR SMDJ9.0CA-HR PDV DDV 9.0 10.00 11. 10 1 15.4 194.8 10 X
*SMDJ10A-HR *SMDJ10CA-HR PDX DDX 10.0 11. 10 12.30 1 1 7. 0 176.5 5 X
*SMDJ11A-HR *SMDJ11CA-HR PDZ DDZ 11. 0 12.20 13.50 1 18.2 164.8 2 X
*SMDJ12A-HR SMDJ12CA-HR PEE DEE 12.0 13.30 14.70 1 19.9 150.8 2 X
*SMDJ13A-HR *SMDJ13CA-HR PEG DEG 13.0 14.40 15.90 1 21.5 139.5 2 X
*SMDJ14A-HR *SMDJ14CA-HR PEK DEK 14.0 15.60 17.20 1 23.2 129.3 2 X
*SMDJ15A-HR SMDJ15CA-HR PEM DEM 15.0 16.70 18.50 1 24.4 123.0 2 X
*SMDJ16A-HR *SMDJ16CA-HR PEP DEP 16.0 17.80 19.70 1 26.0 115.4 2 X
*SMDJ17A-HR *SMDJ17CA-HR PER DER 1 7. 0 18.90 20.90 1 27.6 108.7 2 X
*SMDJ18A-HR SMDJ18CA-HR PET DET 18.0 20.00 22.10 1 29.2 102.7 2 X
*SMDJ20A-HR *SMDJ20CA-HR PEV DEV 20.0 22.20 24.50 1 32.4 92.6 2 X
*SMDJ22A-HR *SMDJ22CA-HR PEX DEX 22.0 24.40 26.90 1 35.5 84.5 2 X
*SMDJ24A-HR *SMDJ24CA-HR PEZ DEZ 24.0 26.70 29.50 1 38.9 77.1 2 X
*SMDJ26A-HR *SMDJ26CA-HR PFE DFE 26.0 28.90 31.90 1 42.1 71.3 2 X
*SMDJ28A-HR *SMDJ28CA-HR PFG DFG 28.0 31.10 34.40 1 45.4 66.1 2 X
SMDJ30A-HR *SMDJ30CA-HR PFK DFK 30.0 33.30 36.80 1 48.4 62.0 2 X
*SMDJ33A-HR *SMDJ33CA-HR PFM DFM 33.0 36.70 40.60 1 53.3 56.3 2 X
*SMDJ36A-HR SMDJ36CA-HR PFP DFP 36.0 40.00 44.20 1 58.1 51.6 2 X
*SMDJ40A-HR SMDJ40CA-HR PFR DFR 40.0 44.40 49.10 1 64.5 46.5 2 X
*SMDJ43A-HR *SMDJ43CA-HR PFT DFT 43.0 47.80 52.80 1 69.4 43.2 2 X
*SMDJ45A-HR *SMDJ45CA-HR PFV DFV 45.0 50.00 55.30 1 72.7 41.3 2 X
*SMDJ48A-HR *SMDJ48CA-HR PFX DFX 48.0 53.30 58.90 1 77.4 38.8 2 X
*SMDJ51A-HR SMDJ51CA-HR PFZ DFZ 51.0 56.70 62.70 1 82.4 36.4 2 X
SMDJ54A-HR *SMDJ54CA-HR RGE DGE 54.0 60.00 66.30 1 87.1 34.4 2 X
*SMDJ58A-HR SMDJ58CA-HR PGG DGG 58.0 64.40 71.20 1 93.6 32.1 2 X
*SMDJ60A-HR - PGK - 60.0 66.70 73.70 1 96.8 31.0 2 X
*SMDJ64A-HR - PGM - 64.0 71.10 78.60 1 103.0 29.1 2 X
*SMDJ70A-HR - PGP - 70.0 77.80 86.00 1 113.0 26.5 2 X
*SMDJ75A-HR - PGR - 75.0 83.30 92.10 1 121.0 24.8 2 X
*SMDJ78A-HR - PGT - 78.0 86.70 95.80 1 126.0 23.8 2 X
SMDJ85A-HR - PGV - 85.0 94.40 104.00 1 137.0 21.9 2 X
*SMDJ90A-HR - PGX - 90.0 100.00 111.0 0 1 146.0 20.5 2 X
*SMDJ100A-HR - PGZ - 100.0 111.0 0 123.00 1 162.0 18.5 2 X
*SMDJ110A-HR -PHE - 110.0 122.00 135.00 1 177.0 16.9 2 X
*SMDJ120A-HR - PHG - 120.0 133.00 147.00 1 193.0 15.5 2 X
*SMDJ130A-HR - PHK - 130.0 144.00 159.00 1 209.0 14.4 2 X
*SMDJ150A-HR - PHM - 150.0 167.00 185.00 1 243.0 12.3 2 X
*SMDJ160A-HR - PHP - 160.0 178.00 197.00 1 259.0 11. 6 2 X
*SMDJ170A-HR - PHR - 170.0 189.00 209.00 1 275.0 10.9 2 X
Note:
1. For bidirectional type having VR of 10 volts and less, the IR limit is double.
2. 100% High Temperature Storage Life test and Reflow Simulation.
3. 100% HTRB(High Temperature Reverse Bias). For Unidirectional, 150C/VR/24hours,
for Bidirectional, 150C/ VR /48hrs(24hours for each direction for Bidirectional).
4. Parts with ”*” will be available upon request.
Revision: August 01, 2011, 16:54
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Transient Voltage Suppression Diodes
295
Surface Mount – 3000W > SMDJ-HR series
SMDJ-HR Series
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
IPPM- Peak Pulse Current, % IRSM
0
0
50
100
150
1.0 2.0 3.0 4.0
tr=10µsec
Peak Value
IPPM
IPPM
2
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of IPPM
10/1000µsec. Waveform
as defined by R.E.A
td
t-Time (ms)
Half Value
IPPM ( )
1
10
100
1000
10000
100000
1.010.0100.0 1000.0
Cj (pF)
VBR - Reverse Breakdown Voltage (V)
Bi-directional V
= OV
Uni-directional
@ VR
Bi-directional
@ VR
Uni-directional V
= OV
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
0255075100 125150 175
P
M(AV)
, Steady Sate Power
Dissipation (W)
TA - Ambient Temperature(ºC)
Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance
Figure 5 - Steady State Power Derating Curve
110100
Number of Cycles at 60 Hz
0
50
100
150
200
250
300
350
IFSM - Peak Forward Surge Current
(A)
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional only
0.1
1
10
100
1000
0.001 0.01 0.11
P
PPM
-Peak Pulse Power (KW)
10
0.31x0.31" (8.0x8.0mm)
Copper Pad Area
t
d
-Pulse Width (ms)
0
20
40
60
80
100
0255075100 125 150 175
Peak Pulse Power (P
PP
) or Current
(I
PP
) Derating in Percentage %
T
j
- initial temperature (ºC)
50
Peak Pluse Power
(Single Pluse)
Average Power
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Peak Pulse Power
Revision: August 01, 2011, 16:54
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Transient Voltage Suppression Diodes
296
Surface Mount – 3000W > SMDJ-HR series
SMDJ-HR Series
Physical Specifications
Weight 0.007 ounce, 0.21 grams
Case JEDEC DO214AB. Molded plastic body
over glass passivated junction
Polarity Color band denotes positive end
(cathode) except Bidirectional.
Terminal Matte Tin-plated leads, Solderable per
JESD22-B102D
Dimensions
Dimensions Inches Millimeters
Min Max Min Max
A 0.114 0.126 2.900 3.200
B0.260 0.280 6.600 7. 11 0
C 0.220 0.245 5.590 6.220
D 0.079 0.103 2.060 2.620
E0.030 0.060 0.760 1.520
F - 0.008 - 0.203
G 0.305 0.320 7.750 8.130
H 0.006 0.012 0.152 0.305
I 0.129 - 3.300 -
J 0.094 - 2.400 -
K - 0.165 4.200
L 0.094 - 2.400 -
Environmental Specifications
Temperature Cycle JESD22-A104
Pressure Cooker JESD 22-A102
High Temp. Storage JESD22-A103
HTRB JESD22-A108
Thermal Shock JESD22-A106
Soldering Parameters
Temperature (T)
Time (t)
Ts(min)
Ts(max)
TL
TP
ts
Preheat
tL
tp
Ramp-up Critical Zone
TL to TP
Ramp-down
t 25˚C to Peak
25˚C
Reflow Condition Lead–free assembly
Pre Heat
- Temperature Min (Ts(min))150°C
- Temperature Max (Ts(max))200°C
- Time (min to max) (ts)60 – 180 secs
Average ramp up rate (Liquidus Temp
(TL) to peak 3°C/second max
TS(max) to TL - Ramp-up Rate 3°C/second max
Reflow - Temperature (TL) (Liquidus) 217°C
- Time (min to max) (ts)60 – 150 seconds
Peak Temperature (TP)260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)20 – 40 seconds
Ramp-down Rate 6°C/second max
Time 25°C to peak Temperature (TP)8 minutes Max.
Do not exceed 280°C
DO-214AB (SMC J-Bend)
Dimensions in inches and (millimeters)
Cathode Band
B
F
G
H
E
C
D
A
(all dimensions in mm)
I
L
K
J
Solder Pads
Revision: August 01, 2011, 16:54
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Transient Voltage Suppression Diodes
297
Surface Mount – 3000W > SMDJ-HR series
SMDJ-HR Series
Part Numbering System
Packaging
Part number Component
Package Quantity Packaging
Option
Packaging
Specification
SMDJxxxXX-HR DO-214AB 3000 Tape & Reel – 16mm/13” tape EIA STD RS-481
Part Marking System
VOLTAGE
BI-DIRECTIONAL
5% VOLTAGE TOLERANCE
SERIES
SMDJ -HR XXX CA
High Reliability
F
XXX
Marking Code
Littelfuse Logo
Cathode Band
XXXXX
Date Code
