TAK CHEONG SE M ICOND UC TOR 500 mW DO-35 Hermetically Sealed Glass Zener Voltage Regulators Absolute Maximum Ratings AXIAL LEAD DO35 TA = 25C unless otherwise noted Parameter Power Dissipation Storage Temperature Range Operating Junction Temperature Value Units 500 mW -65 to +200 C +200 C DEVICE MARKING DIAGRAM L 7x xT L : Logo Device Code : TC1N7xxT Tolerance (T) : (Blank) :A :C :D These ratings are limiting values above which the serviceability of the diode may be impaired. Specification Features: = 10% = 5% = 2% = 1% Zener Voltage Range 3.3 to 12 Volts DO-35 Package (JEDEC) Through-Hole Device Type Mounting Hermetically Sealed Glass Compression Bonded Construction Cathode Anode All External Surfaces Are Corrosion Resistant And Leads Are Readily Solderable RoHS Compliant ELECTRICAL SYMBOL Solder Hot Dip Tin (Sn) Lead Finish Cathode Indicated By Polarity Band Electrical Characteristics TA = 25C unless otherwise noted Device Type V Z @ IZT (Volts) Nominal IZT (mA) ZZT @ IZT () Max IR @ V R (A) Max VR (Volt) TC1N746A 3.3 20 28 10 1 TC1N747A 3.6 20 24 10 1 TC1N748A 3.9 20 23 10 1 TC1N749A 4.3 20 22 2 1 TC1N750A 4.7 20 19 2 1 TC1N751A 5.1 20 17 1 1 TC1N752A 5.6 20 11 1 1 TC1N753A 6.2 20 7 0.1 1 TC1N754A 6.8 20 5 0.1 1 TC1N755A 7.5 20 6 0.1 1 TC1N756A 8.2 20 8 0.1 1 TC1N757A 9.1 20 10 0.1 1 TC1N758A 10 20 17 0.1 1 TC1N759A 12 20 30 0.1 1 VF Forward Voltage = 1.5 V Maximum @ IF = 200 mA for all types Number : DB-209 January 2010/ C Page 1 TC1N746A through TC1N759A (R) (R) TAK CHEONG SE M ICOND UC TOR Notes: 1. TOLERANCE AND VOLTAGE DESIGNATION The type numbers listed have zener voltage as shown and have a standard tolerance on the nominal zener voltage of 5%. Suffix (BLANK) = 10%, Suffix C = 2% and D = 1%. 2. SPECIALS AVAILABLE INCLUDE Nominal zener voltages between the voltages shown and tighter voltage, for detailed information on price, availability and delivery, contact you nearest Tak Cheong representative. 3. ZENER VOLTAGE (VZ) MEASUREMENT The zener voltage (V Z) is tested under pulse condition. 4. ZENER IMPEDANCE (Z Z) DERIVATION Zener impedance is derived from the 60-cycle ac voltage, which results when an ac current having an RMS value equal to 10% of the dc zener current (IZT) is superimposed to IZT . Number : DB-209 January 2010/ C Page 2 (R) TAK CHEONG SE M ICOND UC TOR Package Outline Package Case Outline DO-35 DO-35 DIM Millimeters Inches Min Max Min Max A 0.46 0.55 0.018 0.022 B 3.05 5.08 0.120 0.200 C 25.40 38.10 1.000 1.500 D 1.53 2.28 0.060 0.090 Notes: 1. 2. All dimensions are within JEDEC standard. DO35 polarity denoted by cathode band. Number : DB-209 January 2010/ C Page 3 TAK CHEONG (R) DISC LA I MER NOTIC E NOTICE The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information reviously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong's sales office for further assistance. Number: DB-100 April 14, 2008 / A