Q SERIES O8mm (.315") Panel Mount LED Indicators Distinctive features and specification Q8_VOY1705R3US Features * 8mm panel mounting LED indicator * 5mm colored diffused epoxy lens or 5mm water clear super bright LEDs * Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body * Prominent, recessed and flush bezel styles * 2VDC - 220VAC * (2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations (2.0 x 0.5) solder lug/faston terminals on tricolor versions * IP67 sealing option (EN60529) * Supplied with fixing nut and spring washer NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage 02 (No Resistor) 6VDC 12VDC 24VDC 28VDC 110VAC 220VAC Operating Voltage (Min to Max) 1.8 to 3.3VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC 99 to 121VAC 207 to 253VAC Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA 6mA 3mA Max Reverse Voltage: 5V Viewing Angle: 30-100 (dependant on model) Life Expectancy: 100,000 hours Temperature Range: -40 to +85C (operating & storage) Torque: 20 to 25cNm O 8.00 +0.15/-0.0 10,00 0,394 AF 2,00 0,079 PANEL CUTOUT M8 x 0,75 THREAD Standard LED Intensity Prominent and Recessed Flush Forward Voltage HE Red 80mcd 8mcd 2.0V Green 60mcd 6mcd 2.2V Yellow 50mcd 6mcd 2.1V Blue 1600mcd 50mcd 3.3V White 1600mcd 500mcd 3.3V Orange 60mcd 110mcd 2.2V Bi-color (Typical) (Red/Green) 14/30mcd 15/10mcd 2.0V/2.2V Tri-color (Typical) (Red/Green/Yellow) 60/15/13mcd 15/10/6mcd 2.0V/2.2V/2.1V Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. Super Bright LED HE Red Green Yellow Blue White Orange Prominent and Recessed 5,000mcd 10,000mcd 4,000mcd 2,200mcd 2,500mcd 4,000mcd Flush 1,300mcd 1,200mcd 350mcd 280mcd 950mcd 500mcd Forward Voltage 2.2V 3.3V 2.0V 3.3V 3.3V 2.2V Hyper Bright LED HE Red Green Yellow Orange Prominent and Recessed 6,000mcd 1,900mcd 1,600mcd 2,400mcd Flush 980mcd 300mcd 250mcd 110mcd Forward Voltage 2.2V 3.3V 2.0V 2.2V Luminous intensity will be reduced with lower operating current. Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy. The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current. Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal. APEM www.apem.com 1 Q SERIES O8mm (.315") Panel Mount LED Indicators Technical Drawings PROMINENT BEZEL 5,10 0,201 8,75 0,344 10,50 0,413 20,88 0,822 19,38 0,763 5,10 0,201 8,75 0,345 10,50 0,413 200,0 +/-10 [7,874 +/-0,393] 5,10 0,201 8,75 0,344 12,50 0,492 SHORT BODY SOLDER LUG/FASTONS M8x0,75 2,8x0,8 [0,11x0,031] 5,10 0,201 8,75 0,344 12,50 0,492 200,0 +/-10 [7.874+/-0,393] M8x0,75 18,00 0,709 16,50 0,650 EXTENDED SHORT BODY SOLDER LUG/FASTONS 2,8x0,5[0.11x0.019] M8x0,75 10,00 0,394 9,35 0,368 5,10 0,201 8,75 0,344 15,50 0,610 10,00 0,394 9,35 0,009 0,50 0,020 1,25 0,049 1,25 0,049 9,50 0,374 M8x0,75 9,50 0,374 9,50 0,374 5,10 0,201 8,75 0,344 12,50 0,492 SHORT BODY PINS REAR EPOXY WIRES SHORT BODY WIRES M8x0,75 200,0+/-10 [7,874+/-0,393] 5,10 0,201 8,75 0,344 22,50 0,886 0,50 0,020 1,25 0,049 1,25 0,049 9,50 0,374 REAR EPOXY PINS M8x0,75 9,50 0,374 8,00 0,315 6,50 0,256 22,50 0,886 9,50 0,374 28,75 1,132 5,10 0,201 8,75 0,344 9,50 ,374 10,00 0,394 9,35 0,368 5,10 0,201 8,75 0,344 M8x0,75 M8x0,75 0,50 0,020 1,25 0,049 1,25 0,049 2,8x0,8[0,11x0,031] 9,50 0,374 M8x0,75 WIRES PINS 9,50 0,374 SOLDER LUG/FASTONS RECESSED BEZEL 31,75 1,250 3,00 0,118 8,75 0,344 20,00 0,787 18,50 0,728 9,50 0,374 M8x0,75 3,00 0,118 8,75 0,344 13,50 0,531 2 200,00 +/-10 [7,874+/-0,393] 9,50 0,374 9,50 0,374 3,00 0,118 8,75 0,344 15,50 0,610 M8x0,75 18,00 0,709 16,50 0,650 EXTENDED SHORT BODY 10,00 0,394 AFSOLDER LUG/FASTONS 2,00 0,079 M8x0,75 2,8x0,8[0,11x0,031] 9,50 0,374 3,00 0,118 8,75 0,344 15,50 0,610 200,0+/-10 [7,874+/-0,393] SHORT BODY SOLDER LUG/FASTONS SHORT BODY WIRES M8x0,75 200,00+/-10 [7,874+/-0,393] SHORT BODY PINS 0,50 0,020 1,25 0,049 1,25 0,049 9,50 0,374 3,00 0,118 8,75 0,344 13,50 0,531 3,00 0,118 8,75 0,344 25,50 1,004 REAR EPOXY WIRES REAR EPOXY PINS M8x0,75 25,50 1,004 8,00 ,315 6,50 0,256 M8x0,75 0,50 0,020 1,25 0,049 1,25 0,049 10,00 0,394 9,35 0,368 WIRES 9,50 0,374 3,00 0,118 8,75 0,344 M8x0,75 0,50 0,020 1,25 0,049 1,25 0,049 2,8x0,8[0,11X0,393] 9,40 0,370 M8x0,75 PINS 9,40 ,370 SOLDER LUG/FASTONS 3,00 0,118 8,75 0,344 15,50 0,610 10,00 0,394 9,35 0,368 www.apem.com M8 x 0,75 THREAD APEM Q SERIES O8mm (.315") Panel Mount LED Indicators Technical Drawings FLUSH BEZEL 20,00 0,787 18,50 0,728 1,00 0,039 8,75 0,344 15,60 0,614 APEM 200,0+/-10 [7,874+/-0,393] SHORT BODY SOLDER LUG/FASTONS M8x0,75 2,8x0,8[0,11x0,031] 9,50 0,374 1,00 0,039 8,75 0,344 17,60 0,693 0,50 0,020 M8x0,75 18,00 0,709 16,50 0,650 EXTENDED SHORT BODY SOLDER LUG/FASTONS 2,8x0,5[0.11x0.019] M8X0,75 200,0+/-10 [7,874+/-0,393] SHORT BODY PINS 1,00 0,039 8,75 0,344 15,60 0,614 9,50 0,374 9,50 0,374 1,00 0,039 8,75 0,344 17,60 0,693 200,0 +/-10 [7.874+/-0,393] 27,60 1,087 1,25 0,049 1,25 0,049 9,50 0,374 M8x0,75 SHORT BODY WIRES M8x0,75 27,60 1,087 1,00 0,039 8,75 0,344 REAR EPOXY WIRES M8x0,75 0,50 0,020 1,25 0,049 1,25 0,049 9,50 0,374 REAR EPOXY PINS 8,00 0,315 6,50 0,256 9,50 0,374 33,85 1,333 1,00 0,039 8,75 0,344 M8x0,75 10,00 0,394 9,35 0,368 9,50 0,374 1,00 0,039 8,75 0,344 M8x0,75 0,50 0,020 1,25 0,049 1,25 0,049 2,8x0,8[0,11x0,031] WIRES PINS 9,50 0,374 M8x0,75 9,50 0,374 SOLDER LUG/FASTONS 1,00 0,039 8,75 0,344 17,60 0,693 10,00 0,394 9,35 0,368 www.apem.com 1,00 0,039 9,75 0,384 21,60 0,850 10,00 0,394 9,35 0,368 3 Q SERIES O8mm (.315") Panel Mount LED Indicators Overview STANDARD OPTIONS The Q8 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below. Q 8 P 8 G XX Y 12 E SERIES MOUNTING HOLE BEZEL STYLE TERMINALS BEZEL FINISH TYPE OF ILLUMINATION LED COLOR VOLTAGE SEALING Q 8 = O8mm 1 = Solder Lug/ Fastons (2.8 x 0.8) C = Bright Chrome XX = Fixed Light R = Red 02 = no resistor* (Blank) = Unsealed R = Recessed B = Black Chrome G = Green 06 = 6VDC E = IP67 F = Flush 2 = Pins G = Satin Grey KK = Flashing Light (12V - 28VDC) YY = Bi-color B = Blue ZZ = Tri-color W = White P = Prominent 3 = Wires 4 = Rear epoxy Pins Y = Yellow O = Orange 5 = Rear epoxy Wires 12 = 12VDC 12A = 12VAC/DC 24 = 24VDC 24A = 24VAC/DC HR = Hyper Bright Red 28 = 28VDC HG = Hyper Bright Green 28A = 28VAC/DC HY = Hyper Bright Yellow 110 = 110VAC 7 = Short body Wires HO = Hyper Bright Orange 220 = 220VAC 8 = Short body Lug/ Fastons (2.8 x 0.8) SR = Super Bright Red 6 = Short body Pins SG = Super Bright Green 9 = Extended short body solder Lug/ Fastons (2.8 x 0.5) SY = Super Bright Yellow SB = Super Bright Blue SW = Super Bright White SO = Super Bright Orange RG = Red/Green Example Q8P3CXXY02E O8mm, prominent bezel, 200mm wire termination bright chrome finish, fixed light, yellow 2VDC LED, IP67 panel sealed RY = Red/Yellow GY = Green/Yellow RYG = Red/Yellow/Green * Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) * Standard wire length is 200mm, 24AWG UL1061, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM * For LEDs with alternative voltages consult APEM * 110VAC and 220VAC, short body terminal options, 5, 6, 7 and 8 please consult the factory * Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage another color is produced - Bi-colors are available up to 28VDC. [AC products not available] * Take care when soldering to the Faston terminals (recommended solder temperature 300C - 3 sec) * Terminal options 6,7 & 9 are only available up to 28V (DC Only) tri-color not available with terminal 9 * Terminal code 8 is only available without integral resistor, see forward voltage values. * Maximum panel thickness 7mm * We recommend using Hyperbright orSuperbright LEDs for use at 110VAC and 220VAC * Mains voltage product is not recommended for use on 3 phase appliances * The Tri-color LED has red and green LEDs when both are connected yellow is produced * Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-) * Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode * Tri-color pins are center (-) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red * = For resistorless versions (02) please refer to the forward voltage on page 1 4 www.apem.com APEM Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Apem: Q8P1BXXR12 Q8P1CKKR12 Q8P1CXXSB12 Q8P1CXXSG12 Q8P1CXXSR12 Q8P1CXXSW12 Q8P1CXXSY12 Q8P1GXXR12 Q8P2CXXR12 Q8P3CXXR12 Q8F1CXXB24 Q8F1CXXG24 Q8F1CXXR110 Q8F1CXXR12 Q8F1CXXR24 Q8F1CXXW12 Q8F1CXXW24 Q8F1CXXY12 Q8F1CXXY24 Q8P1CXXB12 Q8P1CXXB24 Q8P1CXXG12 Q8P1CXXG24 Q8P1CXXR110 Q8P1CXXR12 Q8P1CXXR24 Q8P1CXXW12 Q8P1CXXW24 Q8P1CXXY24 Q8R1CXXB12 Q8R1CXXB24 Q8R1CXXG12 Q8R1CXXG24 Q8R1CXXR110 Q8R1CXXR12 Q8R1CXXR24 Q8R1CXXW12 Q8R1CXXW24 Q8R1CXXY12 Q8R1CXXY24 Q8F1CXXG02 Q8F6BXXSG02E Q8F6BXXSR02E Q8F6BXXSY02E Q8R3CYYRG02E Q8P1CXXG12E Q8P1CXXR24E Q8P1CXXY12E Q8F1CXXG24E Q8P1CZZRYG12E Q8P1CXXR12E Q8F1CXXR24E Q8F1CXXG12E Q8F1CXXR12E Q8F1CZZRYG24E Q8P1CXXG24E Q8F1CXXY24E Q8P1CXXY24E Q8P1CZZRYG24E Q8F1CZZRYG12E Q8F1CXXY12E Q8F1BXXB110E Q8F1BXXB12E Q8F1BXXB24E Q8F1BXXG110E Q8F1BXXG12E Q8F1BXXG24E Q8F1BXXR110E Q8F1BXXR12E Q8F1BXXR24E Q8F1BXXW110E Q8F1BXXW12E Q8F1BXXW24E Q8F1BXXY110E Q8F1BXXY12E Q8F1BXXY24E Q8F1CXXB110E Q8F1CXXB12E Q8F1CXXB24E Q8F1CXXG110E Q8F1CXXR110E Q8F1CXXW110E Q8F1CXXW12E Q8F1CXXW24E Q8F1CXXY110E Q8P1BXXB110E Q8P1BXXB12E Q8P1BXXB24E Q8P1BXXG110E Q8P1BXXG12E Q8P1BXXG24E Q8P1BXXR110E Q8P1BXXR12E Q8P1BXXR24E Q8P1BXXW110E Q8P1BXXW12E Q8P1BXXW24E Q8P1BXXY110E Q8P1BXXY12E Q8P1BXXY24E