1
www.apem.com
Features
• 8mm panel mounting LED indicator
• 5mm colored diffused epoxy lens or 5mm water clear super bright LEDs
•
•
Prominent, recessed and flush bezel styles
•
2VDC – 220VAC
•
(2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations
(2.0 x 0.5) solder lug/faston terminals on tricolor versions
•
IP67 sealing option (EN60529)
•
Supplied with fixing nut and spring washer
NB: UL Recognized Component
Q SERIES Ø8mm (.315") Panel Mount LED Indicators
Distinctive features and specification
PANEL CUTOUT
Ø 8.00 +0.15/-0.0
Standard LED Intensity Prominent and Recessed Flush Forward Voltage
HE Red 80mcd 8mcd 2.0V
Green 60mcd 6mcd 2.2V
Yellow 50mcd 6mcd 2.1V
Blue 1600mcd 50mcd 3.3V
White 1600mcd 500mcd 3.3V
Orange 60mcd 110mcd 2.2V
Bi-color (Typical) (Red/Green) 14/30mcd 15/10mcd 2.0V/2.2V
Tri-color (Typical) (Red/Green/Yellow) 60/15/13mcd 15/10/6mcd 2.0V/2.2V/2.1V
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.
Super Bright LED Prominent and Recessed Flush Forward Voltage
HE Red 5,000mcd 1,300mcd 2.2V
Green 10,000mcd 1,200mcd 3.3V
Yellow 4,000mcd 350mcd 2.0V
Blue 2,200mcd 280mcd 3.3V
White 2,500mcd 950mcd 3.3V
Orange 4,000mcd 500mcd 2.2V
Hyper Bright LED Prominent and Recessed Flush Forward Voltage
HE Red 6,000mcd 980mcd 2.2V
Green 1,900mcd 300mcd 3.3V
Yellow 1,600mcd 250mcd 2.0V
Orange
2,400mcd
110mcd 2.2V
Luminous intensity will be reduced with lower operating current.
Max Reverse Voltage: 5V
Viewing Angle: 30–100° (dependant on model)
Life Expectancy: 100,000 hours
Temperature Range: –40 to +85°C
Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
The company reserves the right to change specifications without notice.
* Customer to supply resistor for desired operating current.
Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
Luminous intensities and color shades of white LEDs may vary within a batch.
LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal.
TECHNICAL SPECIFICATIONS
Voltage Operating Voltage Operating Current
(Min to Max) (Typical All Types)
02 (No Resistor) 1.8 to 3.3VDC 20mA max*
6VDC 5.4 to 6.6VDC 20mA
12VDC 10.8 to 13.2VDC 20mA
24VDC 21.6 to 26.4VDC 20mA
28VDC 25.2 to 30.8VDC 20mA
110VAC 99 to 121VAC 6mA
220VAC 207 to 253VAC 3mA
APEM
Torque: 20 to 25cNm
(operating & storage)
10,00 0,394 AF
2,00 0,079
M8 x 0,75 THREAD
Q8_VOY1705R3US
Plated brass bezel finished in bright chrome,
black chrome or satin grey and moulded polycarbonate rear body
2www.apem.com
Q SERIES Ø8mm (.315") Panel Mount LED Indicators
Technical Drawings
PROMINENT BEZEL
RECESSED BEZEL
REAR EPOXY PINS
REAR EPOXY PINS
PINS
PINS
SHORT BODY WIRES
SHORT BODY WIRES
SHORT BODY PINS
SHORT BODY PINS
REAR EPOXY WIRES
REAR EPOXY WIRES
WIRES
WIRES
SOLDER LUG/FASTONS
SOLDER LUG/FASTONS
SHORT BODY SOLDER LUG/FASTONS
SHORT BODY SOLDER LUG/FASTONS
EXTENDED SHORT BODY SOLDER LUG/FASTONS
EXTENDED SHORT BODY SOLDER LUG/FASTONS
APEM
M8x0,75
28,75 1,132
5,10 0,201
9,50
0,374
9,35 0,368
10,00 0,394
2,8x0,8[0,11x0,031]
8,75 0,344
1,25 0,049
22,50 0,886
5,10 0,201
6,50 0,256
8,00 0,315
1,25 0,049
9,50
0,374
M8x0,75
8,75 0,344
0,50 0,020
M8x0,75
22,50 0,886
5,10 0,201
9,50
0,374
200,0+/-10
[7,874+/-0,393]
8,75 0,344
0,50 0,020
1,25 0,049
1,25 0,049
19,38 0,763
20,88 0,8225,10 0,201
8,75 0,344
10,50 0,413
9,50
0,374
M8x0,75
9,50
0,374
5,10 0,201
8,75 0,345
10,50 0,413
M8x0,75
200,0 +/-10
[7,874 +/-0,393]
1,25 0,049
12,50 0,492
5,10 0,201
9,50
0,374
16,50 0,650
18,00 0,709
1,25 0,049
8,75 0,344
0,50 0,020
M8x0,75
12,50 0,492
5,10 0,201
9,50
0,374
M8x0,75
200,0 +/-10
[7.874+/-0,393]
8,75 0,344
2,8x0,8[0,11X0,393]
31,75 1,250
3,00 0,118
9,40
,370
9,35 0,368
10,00 0,394
8,75 0,344
M8x0,75
25,50 1,004
3,00 0,118
9,40
0,370
6,50 0,256
8,00 ,315
1,25 0,049
1,25 0,049
M8x0,75
8,75 0,344
0,50 0,020
25,50 1,004
3,00 0,118
9,50
0,374
M8x0,75
200,00+/-10
[7,874+/-0,393]
8,75 0,344
9,50
0,374
3,00 0,118
8,75 0,344
13,50 0,531
20,00 0,787
18,50 0,728
0,50 0,020
1,25 0,049
1,25 0,049
M8x0,75
9,50
0,374
3,00 0,118
8,75 0,344
13,50 0,531
M8x0,75
200,0+/-10
[7,874+/-0,393]
15,50 0,610
3,00 0,118
9,50
0,374
16,50 0,650
18,00 0,709
1,25 0,049
1,25 0,049
M8x0,75
8,75 0,344
0,50 0,020
3,00 0,118
15,50 0,610
9,50
0,374
200,00 +/-10
[7,874+/-0,393]
M8x0,75
8,75 0,344
3,00 0,118
15,50 0,610
9,35 0,368
10,00 0,394
9,50
0,374
M8x0,75
2,8x0,8[0,11x0,031]
8,75 0,344
12,50 0,492
9,35 0,009
10,00 0,3945,10 0,201
9,50
0,374
2,8x0,8 [0,11x0,031]
M8x0,75
8,75 0,344
2,8x0,5[0.11x0.019]
M8x0,75
9,50
,374
5,10 0,201
8,75 0,344
15,50 0,610
9,35 0,368
10,00 0,394
10,00 0,394 AF
2,00 0,079
M8 x 0,75 THREAD
3
www.apem.com
FLUSH BEZEL
Q SERIES Ø8mm (.315") Panel Mount LED Indicators
Technical Drawings
REAR EPOXY PINS
PINS
SHORT BODY WIRES
SHORT BODY PINS
REAR EPOXY WIRES
WIRES
SOLDER LUG/FASTONS
SHORT BODY SOLDER LUG/FASTONS
APEM
1,00 0,039
33,85 1,333
9,35 0,368
10,00 0,394
9,50
0,374
2,8x0,8[0,11x0,031]
M8x0,75
8,75 0,344
27,60 1,087
1,00 0,039
6,50 0,256
8,00 0,315
1,25 0,049
1,25 0,049
9,50
0,374
M8x0,75
8,75 0,344
0,50 0,020
9,50
0,374
1,00 0,039
8,75 0,344
27,60 1,087
M8x0,75
200,0 +/-10
[7.874+/-0,393]
9,50
0,374
1,00 0,039
8,75 0,344
15,60 0,614
18,50 0,728
20,00 0,787
0,50 0,020
1,25 0,049
1,25 0,049
M8x0,75
9,50
0,374
1,00 0,039
8,75 0,344
15,60 0,614
M8x0,75
200,0+/-10
[7,874+/-0,393]
17,60 0,693
1,00 0,039
16,50 0,650
18,00 0,709
9,50
0,374
1,25 0,049
1,25 0,049
M8x0,75
8,75 0,344
0,50 0,020
17,60 0,693
1,00 0,039
9,50
0,374
M8x0,75
200,0+/-10
[7,874+/-0,393]
8,75 0,344
1,00 0,039
17,60 0,693
10,00 0,394
9,35 0,368
9,50
0,374
M8x0,75
2,8x0,8[0,11x0,031]
8,75 0,344
EXTENDED SHORT BODY SOLDER LUG/FASTONS
M8X0,75
2,8x0,5[0.11x0.019]
9,50
0,374
1,00 0,039
9,75 0,384
21,60 0,850
9,35 0,368
10,00 0,394
4www.apem.com
STANDARD OPTIONS
Q 8 P 8 G XX Y 12 E
Q1 = Solder
Lug/ Fastons
(2.8 x 0.8)
2 = Pins
3 = Wires
4 = Rear epoxy
Pins
5 = Rear epoxy
Wires
6 = Short body
Pins
7 = Short body
Wires
C = Bright Chrome
B = Black Chrome
G = Satin Grey
R = Red
G = Green
Y = Yellow
B = Blue
W = White
O = Orange
HR = Hyper Bright Red
HG = Hyper Bright Green
HY = Hyper Bright Yellow
HO = Hyper Bright Orange
SR = Super Bright Red
SG = Super Bright Green
SY = Super Bright Yellow
SB = Super Bright Blue
SW = Super Bright White
SO = Super Bright Orange
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
02 = no resistor*
06 = 6VDC
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
28 = 28VDC
28A = 28VAC/DC
110 = 110VAC
220 = 220VAC
(Blank) = Unsealed
E = IP67
XX = Fixed Light
KK = Flashing Light
(12V – 28VDC)
YY = Bi-color
SERIES MOUNTING
HOLE
8 = Ø8mm P = Prominent
R = Recessed
F = Flush
BEZEL
STYLE TERMINALS BEZEL FINISH TYPE OF
ILLUMINATION LED COLOR VOLTAGE SEALING
The Q8 Series is available with a range of standard options, to specify your LED, simply choose one option from each
column. An example is shown below.
Q SERIES Ø8mm (.315") Panel Mount LED Indicators
Overview
Example Q8P3CXXY02E
Ø8mm, prominent bezel, 200mm wire termination
bright chrome finish, fixed light, yellow
2VDC LED, IP67 panel sealed
• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, 24AWG UL1061, red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
•
•
For LEDs with alternative voltages consult APEM
110VAC and 220VAC, short body terminal options, 5, 6, 7 and 8 please consult the factory
•
Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage
another color is produced – Bi-colors are available up to 28VDC. [AC products not available]
•
Take care when soldering to the Faston terminals (recommended solder temperature 300°C - 3 sec)
•
Terminal options 6,7 & 9 are only available up to 28V (DC Only) tri-color not available with terminal 9
•
Terminal code 8 is only available without integral resistor, see forward voltage values.
•
•
Maximum panel thickness 7mm
We recommend using Hyperbright orSuperbright LEDs for use at 110VAC and 220VAC
•Mains voltage product is not recommended for use on 3 phase appliances
8 = Short body
Lug/ Fastons
(2.8 x 0.8)
ZZ = Tri-color
RYG = Red/Yellow/Green
9 = Extended
short body solder
Lug/ Fastons
(2.8 x 0.5)
APEM
* = For resistorless versions (02) please refer to the forward voltage on page 1
•The Tri-color LED has red and green LEDs when both are connected yellow is produced
•Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-)
Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode
•Tri-color pins are center (–) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red
•
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Apem:
Q8P1BXXR12 Q8P1CKKR12 Q8P1CXXSB12 Q8P1CXXSG12 Q8P1CXXSR12 Q8P1CXXSW12 Q8P1CXXSY12
Q8P1GXXR12 Q8P2CXXR12 Q8P3CXXR12 Q8F1CXXB24 Q8F1CXXG24 Q8F1CXXR110 Q8F1CXXR12
Q8F1CXXR24 Q8F1CXXW12 Q8F1CXXW24 Q8F1CXXY12 Q8F1CXXY24 Q8P1CXXB12 Q8P1CXXB24
Q8P1CXXG12 Q8P1CXXG24 Q8P1CXXR110 Q8P1CXXR12 Q8P1CXXR24 Q8P1CXXW12 Q8P1CXXW24
Q8P1CXXY24 Q8R1CXXB12 Q8R1CXXB24 Q8R1CXXG12 Q8R1CXXG24 Q8R1CXXR110 Q8R1CXXR12
Q8R1CXXR24 Q8R1CXXW12 Q8R1CXXW24 Q8R1CXXY12 Q8R1CXXY24 Q8F1CXXG02 Q8F6BXXSG02E
Q8F6BXXSR02E Q8F6BXXSY02E Q8R3CYYRG02E Q8P1CXXG12E Q8P1CXXR24E Q8P1CXXY12E
Q8F1CXXG24E Q8P1CZZRYG12E Q8P1CXXR12E Q8F1CXXR24E Q8F1CXXG12E Q8F1CXXR12E
Q8F1CZZRYG24E Q8P1CXXG24E Q8F1CXXY24E Q8P1CXXY24E Q8P1CZZRYG24E Q8F1CZZRYG12E
Q8F1CXXY12E Q8F1BXXB110E Q8F1BXXB12E Q8F1BXXB24E Q8F1BXXG110E Q8F1BXXG12E
Q8F1BXXG24E Q8F1BXXR110E Q8F1BXXR12E Q8F1BXXR24E Q8F1BXXW110E Q8F1BXXW12E
Q8F1BXXW24E Q8F1BXXY110E Q8F1BXXY12E Q8F1BXXY24E Q8F1CXXB110E Q8F1CXXB12E
Q8F1CXXB24E Q8F1CXXG110E Q8F1CXXR110E Q8F1CXXW110E Q8F1CXXW12E Q8F1CXXW24E
Q8F1CXXY110E Q8P1BXXB110E Q8P1BXXB12E Q8P1BXXB24E Q8P1BXXG110E Q8P1BXXG12E
Q8P1BXXG24E Q8P1BXXR110E Q8P1BXXR12E Q8P1BXXR24E Q8P1BXXW110E Q8P1BXXW12E
Q8P1BXXW24E Q8P1BXXY110E Q8P1BXXY12E Q8P1BXXY24E
