SPECIFICATION CONTROL DRAWING Product Revision Product Name B-155-03 A B-155-05 A B-155-06 A B-155-07 A B-155-09 A B-155-11 A B-155-13 A B-155-17 A B-155-23 A B-155-33 A Product Dimensions oA oB L min min max 2.5 [0.098] 4.3 [0.169] 6.0 [0.236] 6.8 [0.267] 8.70 [0.343] 10.8 [0.425] 13.0 [0.512] 17.0 [0.669] 22.5 [0.885] 33.0 [1.299] 3.0 [0.118] 4.8 [0.189] 6.70 [0.264] 7.3 [0.287] 9.20 [0.362] 11.5 [0.452] 15.1 [0.594] 19.0 [0.748] 24.5 [0.964] 35.0 [1.380] 24.5 [0.964] 29.3 [1.153] 32.00 [1.260] 32.5 [1.279] 35.50 [1.398] 35.5 [1.397] 45.5 [1.790] 55.5 [2.165] 80.0 [3.149] 80.0 [3.149] Cable Dimensions oF oG H0.5 min max [0.020] D max oE min 3.0 [0.118] 4.8 [0.189] 6.70 [0.264] 7.3 [0.287] 9.20 [0.362] 11.5 [0.452] 15.1 [0.594] 18.0 [0.748] 23.5 [0.925] 34.0 [1.338] 1.5 [0.059] 2.0 [0.078] 3.30 [0.130] 3.3 [0.130] 4.50 [0.177] 4.5 [0.177] 7.0 [0.275] 9.0 [0.354] 12.0 [0.472] 19.0 [0.748] 1.0 [0.039] 1.5 [0.059] 2.80 [0.110] 2.8 [0.110] 4.00 [0.157] 4.0 [0.157] 6.5 [0.256] 8.0 [0.315] 11.0 [0.433] 17.0 [0.689] 2.5 [0.098] 4.3 [0.169] 6.00 [0.236] 6.8 [0.267] 8.70 [0.343] 10.8 [0.425] 13.0 [0.512] 16.0 [0.630] 21.5 [0.846] 32.0 [1.259] 6.0 [0.236] 8.0 [0.315] 9.0 [0.354] 10.0 [0.393) 11.0 [0.433] 12.0 [0.472] 16.0 [0.630] 21.0 [0.827] 29.0 [1.142] 29.0 [1.142] Qty: Item 2 J0.5 [0.020] 7.0 [0.275] 9.0 [0.354] 10.0 [0.394] 11.0 [0.433] 12.0 [0.472] 13.0 [0.512] 17.0 [0.669] 23.0 [0.905] 31.0 [1.220] 31.0 [1.220] 1 1 1 1 2 2 3 2 2 3 MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin. 2. SOLDER PREFORM WITH FLUX. Qty: see table (one solder washer shown). SOLDER: TYPE Sn42Bi58 per ANSI / J-STD-006. FLUX: TYPE ROM1 per ANSI / J-STD-004. 3. MELTABLE SEALING RINGS: Thermally stabilized thermoplastic. APPLICATION 1. These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an insulation rated for at least +85C. 2. Temperature range: -55C to +125C. 3. When installed properly, it will meet the performance requirements of TE Connectivity / Raychem Specification RT-1404. 4. For installation procedure and application equipment, consult RPIP-688-00. For best results, prepare The cable as shown: TITLE: TE Connectivity 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. Raychem Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A PREPARED BY: SOLDERSLEEVE DEVICE, LEAD-FREE LOW-FIRE-HAZARD SHIELD TERMINATION LOW TEMPERATURE DOCUMENT NO.: B-155-XX ANGLES: N/A TE Connectivity reserves the right to amend this drawing at any time. Users should evaluate ROUGHNESS IN the suitability of the product for their MICRON application. DCR NUMBER: REPLACES: PROD. REV.: SEE TABLE CAGE CODE : DOC. ISSUE: DATE: 2 SCALE: 15-Apr-11 SIZE: SHEET: mforonda D050170 --06090 --A 1 of 1 Print Date: 9-May-11 (c) 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: B-155-07 B-155-05 B-155-03 B-155-09