SPECIFICATION CONTROL DRAWING
TE Connectivity
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
Raychem
TITLE:
SOLDERSLEEVE DEVICE, LEAD-FREE
LOW-FIRE-HAZARD SHIELD
TERMINATION LOW TEMPERATURE
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
DOCUMENT NO.:
B-155-XX
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend
this drawing at any time. Users should evaluate
the suitability of the product for their
application.
PROD. REV.:
SEE TABLE
DOC. ISSUE:
2
DATE:
15-Apr-11
PREPARED BY:
mforonda
DCR NUMBER:
D050170
REPLACES:
---
CAGE CODE :
06090
SCALE:
---
SIZE:
A
SHEET:
1 of 1
Print Date: 9-May-11 © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Product Dimensions Cable Dimensions
Product
Name øA
min
øB
min
L
max
D
max
øE
min
øF
min
øG
max
H0.5
[0.020]
J0.5
[0.020]
Qty:
Item 2
B-155-03 A 2.5
[0.098]
3.0
[0.118]
24.5
[0.964]
3.0
[0.118]
1.5
[0.059]
1.0
[0.039]
2.5
[0.098]
6.0
[0.236]
7.0
[0.275] 1
B-155-05 A 4.3
[0.169]
4.8
[0.189]
29.3
[1.153]
4.8
[0.189]
2.0
[0.078]
1.5
[0.059]
4.3
[0.169]
8.0
[0.315]
9.0
[0.354] 1
B-155-06 A 6.0
[0.236]
6.70
[0.264]
32.00
[1.260]
6.70
[0.264]
3.30
[0.130]
2.80
[0.110]
6.00
[0.236]
9.0
[0.354]
10.0
[0.394] 1
B-155-07 A 6.8
[0.267]
7.3
[0.287]
32.5
[1.279]
7.3
[0.287]
3.3
[0.130]
2.8
[0.110]
6.8
[0.267]
10.0
[0.393)
11.0
[0.433] 1
B-155-09 A 8.70
[0.343]
9.20
[0.362]
35.50
[1.398]
9.20
[0.362]
4.50
[0.177]
4.00
[0.157]
8.70
[0.343]
11.0
[0.433]
12.0
[0.472] 2
B-155-11 A 10.8
[0.425]
11.5
[0.452]
35.5
[1.397]
11.5
[0.452]
4.5
[0.177]
4.0
[0.157]
10.8
[0.425]
12.0
[0.472]
13.0
[0.512] 2
B-155-13 A 13.0
[0.512]
15.1
[0.594]
45.5
[1.790]
15.1
[0.594]
7.0
[0.275]
6.5
[0.256]
13.0
[0.512]
16.0
[0.630]
17.0
[0.669] 3
B-155-17 A 17.0
[0.669]
19.0
[0.748]
55.5
[2.165]
18.0
[0.748]
9.0
[0.354]
8.0
[0.315]
16.0
[0.630]
21.0
[0.827]
23.0
[0.905] 2
B-155-23 A 22.5
[0.885]
24.5
[0.964]
80.0
[3.149]
23.5
[0.925]
12.0
[0.472]
11.0
[0.433]
21.5
[0.846]
29.0
[1.142]
31.0
[1.220] 2
B-155-33 A 33.0
[1.299]
35.0
[1.380]
80.0
[3.149]
34.0
[1.338]
19.0
[0.748]
17.0
[0.689]
32.0
[1.259]
29.0
[1.142]
31.0
[1.220] 3
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin.
2. SOLDER PREFORM WITH FLUX. Qty: see table (one solder washer shown).
SOLDER: TYPE Sn42Bi58 per ANSI / J-STD-006.
FLUX: TYPE ROM1 per ANSI / J-STD-004.
3. MELTABLE SEALING RINGS: Thermally stabilized thermoplastic.
APPLICATION
1. These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an
insulation rated for at least +85C.
2. Temperature range: -55C to +125C.
3. When installed properly, it will meet the performance requirements of TE Connectivity / Raychem Specification RT-1404.
4. For installation procedure and application equipment, consult RPIP-688-00.
For best results, prepare
The cable as shown:
