FUJITSU SEMICONDUCTOR
INTRODUCTION SHEET
May, 2010 1/2
Copyright©2010 FUJI TSU SEMICONDUCTOR LIMITED All rights reserved
NP07-12636-1E
8-bit Microcontrollers
MB95280H Series
MB95280H is 8-bit low-pin-count microcontroller series that
has "Easy to use" as a product concept.
This series has the function that is enough for the control of
various small scale systems such as electric home appliance.
And can be used as sub-microcontroller for function addition
in the cause of the specification change.
■FEATURES
F2MC-8FX CPU
Instruction set optimized for controllers
Clock
Maximum clock frequency：16.25MHz
8/16-bit composite timer
case for 8-bit timer：2 channels
case for 16-bit timer：1 channels
Timebase timer：1 channel
Watch prescaler：1 channel
External interrupt：6 channels
- Interrupt by edge detection
- Can be used to wake up the device from different
low power consumption (standby) modes
8/10-bit A/D converter：5 channels
Low power consumption (standby) modes
Stop mode
Sleep mode
Watch mode
Time-base timer mode
I/O port
MB95F282K/F283K/F284K：13
MB95F282H/F283H/F284H：12
On-chip debug
- 1-wire serial control
- Serial writing supported (asynchronous mode)
Low-voltage detection reset circuit
MB95F282K/F283K/F284K
Clock supervisor counter
Dual operation Flash memory
Flash memory security function
Power supply：2.4～5.5V
*The range of the power supply voltage is different
according to the operating frequency and the operating
temperature.
■PACKAGE EXAMPLE OF REFERENCE
■PRODUCT LINEUP
Part number
Parameter
MB95F
282H MB95F
283H MB95F
284H MB95F
282K MB95F
283K MB95F
284K
Type Flash memory product
ROM
(Byte) 8K 12K 20K 8K 12K 20K
RAM
(Byte) 240 496 240 496
Low-voltage
detection
reset No Yes
■ORDERING INFORMATION
Product name Package Remarks
MB95F282HWQN
MB95F282KWQN
MB95F283HWQN
MB95F283KWQN
MB95F284HWQN
MB95F284KWQN
Plastic・QFN,32-pins
(LCC-32P-M19)
5.00mm□,0.50mm pitch
-
MB95F282HPH
MB95F282KPH
MB95F283HPH
MB95F283KPH
MB95F284HPH
MB95F284KPH
Plastic・DIP,16-pins
(DIP-16P-M06)
19.55mm×6.35mm,2.54mm pitch
-
MB95F282HPF
MB95F282KPF
MB95F283HPF
MB95F283KPF
MB95F284HPF
MB95F284KPF
Plastic・SOP,16-pins
(FPT-16P-M06)
5.30mm×10.15mm,1.27mm pitch
-
Plastic ・ SOP, 16-pins
(FPT-16P-M06)
MB95280H Series
NP07-12636-1E
May, 2010 2/2
Copyright©2010 FUJITSU SEMICONDUCT OR LIMITED All rights reserved
■BLOCK DIAGRAM
■SUPPORT TOOL
HARDWARE
Name Part Number Remarks
BGM adapter MB2146-08-E For F2MC-8FX MB95200 series
PC cable USB cable Attached to MB2146-08-E, 1.0m
SOFTWARE
Software Part Number Operating System
SOFTUNE V3 Professional Pack SP36503Z008-P01 Windows2000/XP/Vista
FLASH MICROCONTROLLER PROGRAMMER
Name Remarks
Parallel programmer Made by Flash Support Group,
Hi-Lo Systems, Data I/O, etc.
Serial on board programmer FUJITSU FLASH MCU Programmer
■STARTER KIT
We can provide the STARTER KIT that can easily do the product
evaluation and the program development of MB95200 series.
・The kit includes
- BGM adapter
- Evaluation board
- USB cable (for connecting BGM adapter and PC)
- Document and sample program (CD-ROM)
Flash with security function
(20/12/8 Kbytes)
RAM (496/240 bytes)
Interrupt controller
8/10-bit A/D converter
8/16-bit composite timer (0)
Reset with LVD
Oscillator
circuit
CR
oscillator
Clock control
On-chip debug
Wild register
External interrupt
LIN-UART
troPtroP
F
2
MC-8FX CPU
Internal Bus
(P05
*3
/TO00)
(P06
*3
/TO01)
P12
*1
/EC0, (P04/EC0)
(P01/AN01 to P05
*3
/AN0
5
PF1/X1
*2
PF0/X0
*2
PG2/X1A
*2
PG1/X0A
*2
(P04/HCLK1)
(P05
*3
/HCLK2)
(P12/DBG)
P02/INT02 to P07/INT07
(P02/SCK)
(P03/SOT)
(P04/SIN)
C
V
CC
V
SS
*1: PF2 and P12 are N-ch open drain pins.
*2: Software option
*3: P05 and P06 are high-current pins.
PF2
*1
/RST
*2
STARTER KIT MB2146-420A-01-E
