FUJITSU SEMICONDUCTOR INTRODUCTION SHEET NP07-12636-1E 8-bit Microcontrollers MB95280H Series MB95280H is 8-bit low-pin-count microcontroller series that has "Easy to use" as a product concept. This series has the function that is enough for the control of various small scale systems such as electric home appliance. And can be used as sub-microcontroller for function addition in the cause of the specification change. FEATURES F2MC-8FX CPU PRODUCT LINEUP Part number Parameter Instruction set optimized for controllers MB95F 282H MB95F 283H Type Clock Maximum clock frequency16.25MHz 8/16-bit composite timer case for 8-bit timer2 channels case for 16-bit timer1 channels Timebase timer1 channel Watch prescaler1 channel External interrupt6 channels - Interrupt by edge detection - Can be used to wake up the device from different low power consumption (standby) modes 8/10-bit A/D converter5 channels Low power consumption (standby) modes Stop mode Sleep mode Watch mode Time-base timer mode I/O port MB95F282K/F283K/F284K13 MB95F282H/F283H/F284H12 On-chip debug - 1-wire serial control - Serial writing supported (asynchronous mode) Low-voltage detection reset circuit MB95F282K/F283K/F284K Clock supervisor counter Dual operation Flash memory Flash memory security function Power supply2.45.5V 8K RAM (Byte) 240 12K 20K 496 8K MB95F 283K MB95F 284K 12K 240 No 20K 496 Yes ORDERING INFORMATION Product name Package Remarks MB95F282HWQN MB95F282KWQN MB95F283HWQN MB95F283KWQN MB95F284HWQN MB95F284KWQN PlasticQFN,32-pins (LCC-32P-M19) 5.00mm,0.50mm pitch - MB95F282HPH MB95F282KPH MB95F283HPH MB95F283KPH MB95F284HPH MB95F284KPH PlasticDIP,16-pins (DIP-16P-M06) 19.55mmx6.35mm,2.54mm pitch - MB95F282HPF MB95F282KPF MB95F283HPF MB95F283KPF MB95F284HPF MB95F284KPF PlasticSOP,16-pins (FPT-16P-M06) 5.30mmx10.15mm,1.27mm pitch - PACKAGE EXAMPLE OF REFERENCE *The range of the power supply voltage is different according to the operating frequency and the operating temperature. Plastic SOP, 16-pins (FPT-16P-M06) May, 2010 MB95F 282K Flash memory product ROM (Byte) Low-voltage detection reset MB95F 284H 1/2 Copyright(c)2010 FUJITSU SEMICONDUCTOR LIMITED All rights reserved MB95280H Series BLOCK DIAGRAM F2MC-8FX CPU PF2*1/RST*2 Flash with security function (20/12/8 Kbytes) Reset with LVD PF1/X1*2 RAM (496/240 bytes) PF0/X0*2 PG2/X1A*2 Oscillator circuit CR oscillator Interrupt controller PG1/X0A*2 (P05*3/TO00) (P04/HCLK1) (P06*3/TO01) 8/16-bit composite timer (0) Clock control (P05*3/HCLK2) P12*1/EC0, (P04/EC0) (P12/DBG) On-chip debug P02/INT02 to P07/INT07 External interrupt Internal Bus (P01/AN01 to P05*3/AN05 Wild register 8/10-bit A/D converter (P02/SCK) (P03/SOT) LIN-UART (P04/SIN) C Port Port VCC *1: PF2 and P12 are N-ch open drain pins. VSS *2: Software option *3: P05 and P06 are high-current pins. SUPPORT TOOL HARDWARE Name BGM adapter PC cable Part Number MB2146-08-E USB cable Remarks For F2MC-8FX MB95200 series Attached to MB2146-08-E, 1.0m SOFTWARE Software SOFTUNE V3 Professional Pack Part Number SP36503Z008-P01 Operating System Windows2000/XP/Vista FLASH MICROCONTROLLER PROGRAMMER Name Parallel programmer Serial on board programmer Remarks Made by Flash Support Group, Hi-Lo Systems, Data I/O, etc. FUJITSU FLASH MCU Programmer STARTER KIT We can provide the STARTER KIT that can easily do the product evaluation and the program development of MB95200 series. The kit includes - BGM adapter - Evaluation board - USB cable (for connecting BGM adapter and PC) - Document and sample program (CD-ROM) STARTER KIT MB2146-420A-01-E NP07-12636-1E May, 2010 2/2 Copyright(c)2010 FUJITSU SEMICONDUCTOR LIMITED All rights reserved