DVFL2800D Series
DVFL2800D-4.0 http://www.vpt-inc.com
Sales Information:
Phone: (425) 353-3010
Fax: (425) 353-4030
E-mail: vptsales@vpt-inc.com 1
HIGH RELIABILITY HYBRID
DC-DC CONVERTERS
DESCRIPTION
The DVFL series of high reliability DC-DC converters
is operable over the full military (-55 °C to +125 °C)
temperature range with no power derating. Unique
to the DVFL series are robust and effective input and
output filters which provide dramatically reduced
input and output noise performance when compared
to other manufacturers competing devices.
Operating at a nominal fixed frequency of 500 kHz,
these regulated, isolated units utilize a high speed
magnetic feedback design and well controlled
undervoltage lockout circuitry to eliminate slow start-
up problems. The current sharing function allows a
maximum of five units to be connected in parallel to
boost the total output power to 5 times. The output
voltage is trimmable up to +10% or down –20%.
These converters are designed and manufactured in
a facility qualified to ISO9001 and certified to MIL-
PRF-38534 and MIL-STD-883.
This product may incorporate one or more of the
following U.S. patents:
5,784,266
5,790,389
5,963,438
5,999,433
6,005,780
6,084,792
6,118,673
FEATURES
High Reliability
Parallel Up to 5 Units With Current Sharing
Output Voltage Trim Up +10% or Down –20%
Wide Input Voltage Range: 16 to 40 Volts per
MIL-STD-704
Up to 120 Watts Output Power
Fault Tolerant Magnetic Feedback Circuit
NO Use of Optoisolators
Undervoltage Lockout
Indefinite Short Circuit Protection
Current Limit Protection
Industry Standard Pinout
Input Transient Voltage: 50 Volts for 1 second
Precision Seam Welded Hermetic Package
High Power Density: > 80 W/in3
Custom Versions Available
Additional Environmental Screening Available
Meets MIL-STD-461 Revisions C, D, E and F
EMC Requirements When Used With VPT’s
EMI Filters
MIL-PRF-38534 Element Evaluated
Components
Space Applications should consider VPT’s “S”
Series of Radiation Tolerant Power Conversion
Devices. Contact VPT for details.
Figure 1 – DVFL2800D DC-DC Converter
(Exact marking may differ from that shown)
DVFL2800D Series
DVFL2800D-4.0 2
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load5, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous) 40 VDC Junction Temperature Rise to Case +15°C
Input Voltage (Transient, 1 second) 50 Volts Storage Temperature -65°C to +150°C
Output Power1 120 Watts Lead Solder Temperature (10 seconds) 270°C
Power Dissipation (Full Load, TCASE = +125°C) 40 Watts Weight (Maximum) (No Pin Extensions) 90 Grams
ESD Rating per MIL-PRF-38543 1C
Parameter Conditions
DVFL2805D DVFL286R3D
Units
Min Typ Max Min Typ Max
STATIC
INPUT
Voltage4
Continuous 16 28 40 16 28 40 V
Transient, 1 sec - - 50 - - 50 V
Current
Inhibited 1 - 1 3 - 1 3 mA
Inhibited 2 - 40 70 - 40 70 mA
No Load - 75 160 - 75 160 mA
Ripple Current Full Load5, 20Hz to 10MHz - 30 80 - 35 80 mAp-p
INH1 Pin Input4 0 - 1.5 0 - 1.5 V
INH2 Pin Input4 0 - 1 0 - 1 V
INH1 Pin Open Circuit Voltage4 10.5 - 15 10.5 - 15 V
INH2 Pin Open Circuit Voltage4 4 - 12 4 - 12 V
UVLO Turn On 14.5 - 16 14.5 - 16 V
UVLO Turn Off4 13.5 - 15.5 13.5 - 15.5 V
OUTPUT
Voltage5
+VOUT TCASE = 25°C 4.95 5.00 5.05 6.237 6.3 6.363 V
+VOUT TCASE = -55°C to +125°C 4.925 5.00 5.075 6.205 6.3 6.395 V
-VOUT TCASE = 25°C 4.80 5.00 5.20 6.1 6.3 6.5 V
-VOUT TCASE = -55°C to +125°C 4.75 5.00 5.25 6.048 6.3 6.552 V
Power3,6 Total - - 100 - - 100 W
±VOUT Either Output - - 70 - - 70 W
Current3,6 ±VOUT Either Output - - 14 - - 11.1 A
Ripple Voltage ±VOUT Full Load5, 20Hz to 10MHz - 15 80 - 20 80 mVp-p
Line Regulation +VOUT VIN = 16V to 40V - 2 20 - 2 20 mV
-VOUT VIN = 16V to 40V - 10 200 - 10 200 mV
Load Regulation +VOUT No Load to Full Load5 - 10 100 - 10 120 mV
-VOUT No Load to Full Load5 - 55 200 - 70 200 mV
Cross Regulation -VOUT
V1+ Load 30% - Load 70%
V2+ Load 70% - Load 30% - 260 450 - 300 450 mV
Voltage Trim Full Load -20 - 10 -20 - 10 %
Share Pin Voltage4 2 - 4 2 - 4 V
EFFICIENCY Full Load5 73 80 - 76 81 - %
LOAD FAULT POWER DISSIPATION Overload4 - - 50 - - 50 W
Short Circuit - - 50 - - 50 W
CAPACITIVE LOAD4 - - 500 - - 500
F
SWITCHING FREQUENCY 425 500 600 425 500 600 kHz
SYNC FREQUENCY RANGE VH – VL = 5V
Duty Cycle = 20% - 80% 500 - 600 500 - 600 kHz
ISOLATION 500 VDC, TCASE = 25°C 100 - - 100 - - MΩ
MTBF (MIL-HDBK-217F) AIF @ TC = 55°C - 400 - - 400 - kHrs
DVFL2800D Series
DVFL2800D-4.0 3
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load5, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous) 40 VDC Junction Temperature Rise to Case +15°C
Input Voltage (Transient, 1 second) 50 Volts Storage Temperature -65°C to +150°C
Output Power1 120 Watts Lead Solder Temperature (10 seconds) 270°C
Power Dissipation (Full Load, TCASE = +125°C) 40 Watts Weight (Maximum) (No Pin Extensions) 90 Grams
ESD Rating per MIL-PRF-38543 1C
Parameter Conditions
DVFL2805D DVFL286R3D
Units
Min Typ Max Min Typ Max
DYNAMIC
Load Step Output Transient ±VOUT Half Load to Full Load - 130 400 - 150 300
mVPK
Load Step Recovery2 - 200 500 - 200 500
Sec
Line Step Output Transient4 ±VOUT VIN = 16V to 40V - 300 600 - 250 600
mVPK
Line Step Recovery2, 4 - 300 500 - 400 700
Sec
Turn On Delay ±VOUT VIN = 0V to 28V - 5 20 - 5 20 mSec
Turn On Overshoot - 0 25 - 0 25 mVPK
Notes: 1. Dependant on output voltage.
2. Time for output voltage to settle within 1% of its nominal value.
3. Derate linearly to 0 at 135°C.
4. Verified by qualification testing.
5. Half load at +VOUT and half load at –VOUT.
6. Up to 70% of the total power or current can be drawn from any one of the two outputs.
DVFL2800D Series
DVFL2800D-4.0 4
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load5, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous) 40 VDC Junction Temperature Rise to Case +15°C
Input Voltage (Transient, 1 second) 50 Volts Storage Temperature -65°C to +150°C
Output Power1 120 Watts Lead Solder Temperature (10 seconds) 270°C
Power Dissipation (Full Load, TCASE = +125°C) 40 Watts Weight (Maximum) (No Pin Extensions) 90 Grams
ESD Rating per MIL-PRF-38543 1C
Parameter Conditions
DVFL289R5D DVFL2812D
Units
Min Typ Max Min Typ Max
STATIC
INPUT
Voltage4
Continuous 16 28 40 16 28 40 V
Transient, 1 sec - - 50 - - 50 V
Current
Inhibited 1 - 1 3 - 1 3 mA
Inhibited 2 - 40 70 - 40 70 mA
No Load - 80 160 - 90 160 mA
Ripple Current Full Load5, 20Hz to 10MHz - 30 80 - 35 80 mAp-p
INH1 Pin Input4 0 - 1.5 0 - 1.5 V
INH2 Pin Input4 0 - 1 0 - 1 V
INH1 Pin Open Circuit Voltage4 10.5 - 15 10.5 - 15 V
INH2 Pin Open Circuit Voltage4 4 - 12 4 - 12 V
UVLO Turn On 14.5 - 16 14.5 - 16 V
UVLO Turn Off4 13.5 - 15.5 13.5 - 15.5 V
OUTPUT
Voltage5
+VOUT TCASE = 25°C 9.405 9.5 9.595 11.88 12.00 12.12 V
+VOUT TCASE = -55°C to +125°C 9.357 9.5 9.643 11.82 12.00 12.18 V
-VOUT TCASE = 25°C 9.3 9.5 9.7 11.80 12.00 12.20 V
-VOUT TCASE = -55°C to +125°C 9.12 9.5 9.88 11.52 12.00 12.48 V
Power3,6 Total - - 100 - - 110 W
±VOUT Either Output - - 70 - - 77 W
Current3,6 ±VOUT Either Output - - 7.4 - - 6.4 A
Ripple Voltage ±VOUT Full Load5, 20Hz to 10MHz - 25 80 - 25 80 mVp-p
Line Regulation +VOUT VIN = 16V to 40V - 2 20 - 2 20 mV
-VOUT VIN = 16V to 40V - 10 200 - 10 200 mV
Load Regulation +VOUT No Load to Full Load5 - 2 100 - 2 120 mV
-VOUT No Load to Full Load5 - 45 200 - 40 200 mV
Cross Regulation -VOUT
V1+ Load 30% - Load 70%
V2+ Load 70% - Load 30% - 220 450 - 220 450 mV
Voltage Trim Full Load -20 - 10 -20 - 10 %
Share Pin Voltage4 2 - 4 2 - 4 V
EFFICIENCY Full Load5 79 83 - 80 86 - %
LOAD FAULT POWER DISSIPATION Overload4 - - 50 - - 50 W
Short Circuit - - 50 - - 50 W
CAPACITIVE LOAD4 - - 500 - - 500
F
SWITCHING FREQUENCY 425 500 600 425 500 600 kHz
SYNC FREQUENCY RANGE VH – VL = 5V
Duty Cycle = 20% - 80% 500 - 600 500 - 600 kHz
ISOLATION 500 VDC, TCASE = 25°C 100 - - 100 - - MΩ
MTBF (MIL-HDBK-217F) AIF @ TC = 55°C - 400 - - 400 - kHrs
DVFL2800D Series
DVFL2800D-4.0 5
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load5, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous) 40 VDC Junction Temperature Rise to Case +15°C
Input Voltage (Transient, 1 second) 50 Volts Storage Temperature -65°C to +150°C
Output Power1 120 Watts Lead Solder Temperature (10 seconds) 270°C
Power Dissipation (Full Load, TCASE = +125°C) 40 Watts Weight (Maximum) (No Pin Extensions) 90 Grams
ESD Rating per MIL-PRF-38543 1C
Parameter Conditions
DVFL289R5D DVFL2812D
Units
Min Typ Max Min Typ Max
DYNAMIC
Load Step Output Transient ±VOUT Half Load to Full Load - 400 700 - 260 500 mVPK
Load Step Recovery2 -
250 500 - 140 500
Sec
Line Step Output Transient4 ±VOUT VIN = 16V to 40V - 550 1000 - 600 1200 mVPK
Line Step Recovery2, 4 -
300 600 - 300 500
Sec
Turn On Delay ±VOUT VIN = 0V to 28V - 5 20 - 5 20 mSec
Turn On Overshoot - 0 25 - 0 50 mVPK
Notes: 1. Dependant on output voltage.
2. Time for output voltage to settle within 1% of its nominal value.
3. Derate linearly to 0 at 135°C.
4. Verified by qualification testing.
5. Half load at +VOUT and half load at –VOUT.
6. Up to 70% of the total power or current can be drawn from any one of the two outputs.
DVFL2800D Series
DVFL2800D-4.0 6
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load5, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous) 40 VDC Junction Temperature Rise to Case +15°C
Input Voltage (Transient, 1 second) 50 Volts Storage Temperature -65°C to +150°C
Output Power1 120 Watts Lead Solder Temperature (10 seconds) 270°C
Power Dissipation (Full Load, TCASE = +125°C) 40 Watts Weight (Maximum) (No Pin Extensions) 90 Grams
ESD Rating per MIL-PRF-38543 1C
Parameter Conditions
DVFL2815D Units
Min Typ Max
STATIC
INPUT
Voltage4
Continuous 16 28 40 V
Transient, 1 sec - - 50 V
Current
Inhibited 1 - 1 3 mA
Inhibited 2 - 40 70 mA
No Load - 110 160 mA
Ripple Current Full Load5, 20Hz to 10MHz - 40 80 mAp-p
INH1 Pin Input4 0 - 1.5 V
INH2 Pin Input4 0 - 1 V
INH1 Pin Open Circuit Voltage4 10.5 - 15 V
INH2 Pin Open Circuit Voltage4 4 - 12 V
UVLO Turn On 14.5 - 16 V
UVLO Turn Off4 13.5 - 15.5 V
OUTPUT
Voltage5
+VOUT TCASE = 25°C 14.85 15.00 15.15 V
+VOUT TCASE = -55°C to +125°C 14.775 15.00 15.225 V
-VOUT TCASE = 25°C 14.80 15.00 15.20 V
-VOUT TCASE = -55°C to +125°C 14.40 15.00 15.60 V
Power3,6 Total - - 120 W
±VOUT Either Output - - 84 W
Current3,6 ±VOUT Either Output - - 5.6 A
Ripple Voltage ±VOUT Full Load5, 20Hz to 10MHz - 30 80 mVp-p
Line Regulation +VOUT VIN = 16V to 40V - 2 20 mV
-VOUT VIN = 16V to 40V - 10 200 mV
Load Regulation +VOUT No Load to Full Load5 - 2 120 mV
-VOUT No Load to Full Load5 - 30 200 mV
Cross Regulation -VOUT
V1+ Load 30% - Load 70%
V2+ Load 70% - Load 30% - 200 450 mV
Voltage Trim Full Load -20 - 10 %
Share Pin Voltage4 2 - 4 V
EFFICIENCY Full Load5 81 86 - %
LOAD FAULT POWER DISSIPATION Overload4 - - 50 W
Short Circuit - - 50 W
CAPACITIVE LOAD4 - - 500
F
SWITCHING FREQUENCY 425 500 600 kHz
SYNC FREQUENCY RANGE VH – VL = 5V
Duty Cycle = 20% - 80% 500 - 600 kHz
ISOLATION 500 VDC, TCASE = 25°C 100 - - MΩ
MTBF (MIL-HDBK-217F) AIF @ TC = 55°C - 400 - kHrs
DVFL2800D Series
DVFL2800D-4.0 7
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load5, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous) 40 VDC Junction Temperature Rise to Case +15°C
Input Voltage (Transient, 1 second) 50 Volts Storage Temperature -65°C to +150°C
Output Power1 120 Watts Lead Solder Temperature (10 seconds) 270°C
Power Dissipation (Full Load, TCASE = +125°C) 40 Watts Weight (Maximum) (No Pin Extensions) 90 Grams
ESD Rating per MIL-PRF-38543 1C
Parameter Conditions
DVFL2815D Units
Min Typ Max
DYNAMIC
Load Step Output Transient ±VOUT Half Load to Full Load - 260 500 mVPK
Load Step Recovery2 - 110 500
Sec
Line Step Output Transient4 ±VOUT VIN = 16V to 40V - 600 1200 mVPK
Line Step Recovery2, 4 - 300 500
Sec
Turn On Delay ±VOUT VIN = 0V to 28V - 5 20 mSec
Turn On Overshoot - 0 50 mVPK
Notes: 1. Dependant on output voltage.
2. Time for output voltage to settle within 1% of its nominal value.
3. Derate linearly to 0 at 135°C.
4. Verified by qualification testing.
5. Half load at +VOUT and half load at –VOUT.
6. Up to 70% of the total power or current can be drawn from any one of the two outputs.
DVFL2800D Series
DVFL2800D-4.0 8
BLOCK DIAGRAM
Figure 2
CONNECTION DIAGRAM
Figure 3
UNDER
VOLTAGE
S
H
U
TD
O
WN
PRIMARY
H
OUSEKEEPIN
G
SUPPLY
PWM
CONTROL
VOLTAGE AND
CURRENT
AMPLIFIERS
SECONDARY
H
OUSEKEEPIN
G
SU
PPLY
PIN 1
28V IN
PIN 2
IN COM
Q1
+V OUT
PIN 7
PIN 8
OUT COM
INH1
PIN 4
FEEDBACK
MAGNETIC
SYNC IN
PIN 6
SYNC OUT
PIN 5
TRIM
PIN 10
SHARE
PIN 11
INH2
PIN 12
-V OUT
PIN 9
2
IN COM
4
INH1
1
28V IN
7
+V OUT
8
OUT COM
LOAD
+
-
28 Vdc
-V OUT
9
INH2
12
SYNC IN
6
DVFL2800D Series
DVFL2800D-4.0 9
INHIBIT DRIVE CONNECTION DIAGRAM
Figure 4 – Isolated Inhibit Drive and Internal Equivalent Circuit
(Shown with optional capacitor for turn-on delay)
EMI FILTER HOOKUP DIAGRAM
Figure 5 – Converter with EMI Filter
2IN COM
4INH1
128V IN
OPTIONAL
CAPACITOR
BIAS 1
12V
30K
OPTOISOLATOR
+
-
8V
2K
BIAS 2
INH2
12
OUT COM
8
2
IN COM
4
INH1
1
28V IN
7
+V OUT
8
OUT COM
LOAD
+
-
28 Vdc
12
28V OUT
7
OUT COM
1
28V IN
6
IN COM
CASE
- V OUT
9
INH2
12
SYNC IN
6
28V IN
2
28V IN
3
IN COM
4
IN COM
5
28V OUT
11
28V OUT
10
OUT COM
9
OUT COM
8
DVME28 EMI FILTER DVFL2800D DC-DC CONVERTER
DVFL2800D Series
DVFL2800D-4.0 10
+28 VOLT OUTPUT CONNECTION DIAGRAM
Figure 6: +28 Volt Output Converter Using DVFL2815D Converter
2
IN COM
4
INH1
1
28V IN
7
+V OUT
8
OUT COM
-
28 Vdc
+
-
28 Vdc
-V OUT
9
INH2
12
DVFL2815D DC-DC CONVERTER
SYNC IN
6TRIM
10
+
100k
DVFL2800D Series
DVFL2800D-4.0 11
PARALLEL CONNECTION DIAGRAM
Figure 7 – Current Sharing Parallel Connection for Multiple Converters
2
IN COM
4
INH1
1
28V IN
7
+V OUT
8
OUT COM
+
-
28 Vdc
12
28V OUT
7
OUT COM
1
28V IN
6
IN COM
CASE
-V OUT
9
SYNC IN
6
28V IN
2
28V IN
3
IN COM
4
IN COM
5
28V OUT
11
28V OUT
10
OUT COM
9
OUT COM
8
DVME28 EMI FILTER DVFL2800D DC-DC CONVERTER
CASE
5
SYNC OUT
11
SHARE
2
IN COM
4
INH1
1
28V IN
7
+V OUT
8
OUT COM
-V OUT
9
SYNC IN
6
DVFL2800D DC-DC CONVERTER
CASE
5
SYNC OUT
11
SHARE
2
IN COM
4
INH1
1
28V IN
7
+V OUT
8
OUT COM
-V OUT
9
SYNC IN
6
DVFL2800D DC-DC CONVERTER
CASE
11
SHARE
DVFL2800D Series
DVFL2800D-4.0 12
OUTPUT VOLTAGE TRIM
The output voltage can be trimmed down by
connecting a resistor between the TRIM pin
(PIN 10) and the +V OUT pin (PIN 7), or
can be trimmed up by connecting a resistor
between the TRIM pin (PIN 10) and the
OUT COM pin (PIN 8). The maximum trim
range is +10% up and –20% down. The
appropriate resistor values versus the
output voltage are given in the trim table
below.
Figure 8 – Output Voltage Trim
DVFL2805D DVFL286R3D DVFL289R5D DVFL2812D DVFL2815D
+VOUT (V) RTRIM (Ω) +VOUT (V) RTRIM (Ω) +VOUT (V) RTRIM (Ω) +VOUT (V) RTRIM (Ω) +VOUT (V) RTRIM (Ω)
5.5 35.0k 6.9 28.1k 10.45 11.5k 13.2 5.8k 16.50 1.7k
5.4 47.5k 6.8 36.7k 10.3 16.5k 13.0 10.0k 16.25 5.0k
5.3 68.3k 6.7 49.6k 10.1 27.0k 12.8 16.2k 16.00 10.0k
5.2 110k 6.6 71.1k 9.9 48.0k 12.6 26.6k 15.75 18.3k
5.1 235k 6.5 114k 9.7 111k 12.4 47.3k 15.50 35.0k
5.0 - 6.4 243k 9.5 - 12.2 109k 15.25 85.0k
4.9 225k 6.3 - 9.4 681k 12.0 - 15.00 -
4.8 100k 6.2 367k 9.2 210k 11.8 454k 14.75 475k
4.7 58.3k 6.1 171k 9.0 116k 11.6 213k 14.50 225k
4.6 37.5k 6.0 106k 8.8 75.7k 11.4 134k 14.25 142k
4.5 25.0k 5.9 72.9k 8.6 53.3k 11.2 94.0k 14.00 100k
4.4 16.7k 5.8 53.2k 8.4 39.1k 11.0 70.1k 13.75 75.0k
4.3 10.7k 5.7 40.1k 8.2 29.2k 10.8 54.3k 13.50 58.3k
4.2 6.3k 5.6 30.8k 8.0 22.0k 10.6 42.9k 13.25 46.4k
4.1 2.8k 5.5 23.8k 7.8 16.4k 10.4 34.4k 13.00 37.5k
4.0 0 5.4 18.3k 7.6 12.1k 10.2 27.8k 12.75 30.6k
5.3 13.9k 10.0 22.5k 12.50 25.0k
5.2 10.4k 9.8 18.2k 12.25 20.5k
5.1 7.4k 9.6 14.6k 12.00 16.7k
DVFL2800D Series
DVFL2800D-4.0 13
EFFICIENCY PERFORMANCE CURVES (TCASE = 25°C, Full Load, Unless Otherwise Specified)
V
IN = 16V VIN = 28V VIN = 40V
Figure 9 – DVFL2805D Figure 10 – DVFL286R3D
Efficiency (%) vs. Output Power (W) Efficiency (%) vs. Output Power (W)
Figure 11 – DVFL289R5D Figure 12 – DVFL2812D
Efficiency (%) vs. Output Power (W) Efficiency (%) vs. Output Power (W)
73
75
77
79
81
83
20 40 60 80 100
Output Pow er (W)
Efficiency (%)
75
77
79
81
83
85
20 40 60 80 100
Output Pow er (W)
Efficiency (%)
72
75
78
81
84
87
20 40 60 80 100
Output Pow er (W)
Efficiency (%)
77
79
81
83
85
87
20 40 60 80 100 120
Output Pow er (W)
Efficiency (%)
DVFL2800D Series
DVFL2800D-4.0 14
EFFICIENCY PERFORMANCE CURVES (TCASE = 25°C, Full Load, Unless Otherwise Specified)
V
IN = 16V VIN = 28V VIN = 40V
Figure 13 – DVFL2815D
Efficiency (%) vs. Output Power (W)
76
78
80
82
84
86
20 40 60 80 100 120
Output Pow er (W)
Efficiency (%)
DVFL2800D Series
DVFL2800D-4.0 15
CROSS REGULATION CURVES (TCASE = 25°C, Full Load, Unless Otherwise Specified)
+Io = 10% +Io = 30% +Io = 50% +Io = 70%
Figure 14 – DVFL2805D Figure 15 – DVFL286R3D
-Vout (V) vs. -Iout (A) -Vout (V) vs. -Iout (A)
Figure 16 – DVFL289R5D Figure 17 – DVFL2812D
-Vout (V) vs. -Iout (A) -Vout (V) vs. -Iout (A)
-6
-5.8
-5.6
-5.4
-5.2
-5
-4.8
-4.6
03691215
-Io (A)
-Vo (V)
+Io=2A +Io=6A
+Io=10A +Io=14A
-7.3
-7.1
-6.9
-6.7
-6.5
-6.3
-6.1
-5.9
-5.7
024681012
-Io (A)
-Vo (V)
+Io=1.59A +Io=4.76A
+Io=7.94A +Io=11.11A
-10.5
-10.3
-10.1
-9.9
-9.7
-9.5
-9.3
-9.1
-8.9
012345678
-Io (A)
-Vo (V)
+Io=1.05A +Io=3.16A
+Io=5.26A +Io=7.37A
-13.2
-13
-12.8
-12.6
-12.4
-12.2
-12
-11.8
-11.6
01234567
-Io (A)
-Vo (V)
+Io=0.92A +Io=2.75A
+Io=4.58A +Io=6.42A
DVFL2800D Series
DVFL2800D-4.0 16
CROSS REGULATION CURVES (TCASE = 25°C, Full Load, Unless Otherwise Specified)
+Io = 10% +Io = 30% +Io = 50% +Io = 70%
Figure 18 – DVFL2815D
-Vout (V) vs. -Iout (A)
-16.4
-16.2
-16
-15.8
-15.6
-15.4
-15.2
-15
-14.8
-14.6
0123456
-Io (A)
-Vo (V)
+Io=0.8A +Io=2.4A
+Io=4A +Io=5.6A
DVFL2800D Series
DVFL2800D-4.0 17
EMI PERFORMANCE CURVES
(TCASE = 25°C, VIN = +28V ± 5%, Full Load, Unless Otherwise Specified)
Figure 19 – DVFL2800D without EMI Filter
Figure 20 – DVFL2800D with EMI Filter
DVFL2800D Series
DVFL2800D-4.0 18
PACKAGE SPECIFICATIONS
Pin Function Pin Function Pin Function Pin Function
1 28V IN 4 INH1 7 +V OUT 10 TRIM
2 IN COM 5 SYNC OUT 8 OUT COM 11 SHARE
3 CASE 6 SYNC IN 9 -V OUT 12 INH2
Figure 21 – Package and Pinout
DVFL2800D Series
DVFL2800D-4.0 19
PACKAGE SPECIFICATIONS (DOWN-LEADED)
Pin Function Pin Function Pin Function Pin Function
1 28V IN 4 INH1 7 +V OUT 10 TRIM
2 IN COM 5 SYNC OUT 8 OUT COM 11 SHARE
3 CASE 6 SYNC IN 9 -V OUT 12 INH2
Figure 22 – Package and Pinout (With Down-Leaded Pin Extensions Added)
DVFL2800D Series
DVFL2800D-4.0 20
PACKAGE SPECIFICATIONS (UP-LEADED)
Pin Function Pin Function Pin Function Pin Function
1 28V IN 4 INH1 7 +V OUT 10 TRIM
2 IN COM 5 SYNC OUT 8 OUT COM 11 SHARE
3 CASE 6 SYNC IN 9 -V OUT 12 INH2
Figure 23 – Package and Pinout (With Up-Leaded Pin Extensions Added)
DVFL2800D Series
DVFL2800D-4.0 21
PACKAGE PIN DESCRIPTION
Pin Function Description
1 28V IN Positive Input Voltage Connection
2 IN COM Input Common Connection
3 CASE Case Connection
4 INH1
Logic Low = Disabled Output. Connecting the inhibit(1) pin to input common
causes converter shutdown.
Logic High = Enabled Output. Unconnected or open collector TTL.
5 SYNC OUT Output Synchronization Signal
6 SYNC IN Input Synchronization Signal
7 +V OUT Positive Output Voltage Connection
8 OUT COM Output Common Connection
9 -V OUT Negative Output Voltage Connection
10 TRIM Trim Output Voltage to +10%, -20% of Nominal Value
11 SHARE Current Share
12 INH2
Logic Low = Disabled Output. Connecting the inhibit(2) pin to output common
causes converter shutdown.
Logic High = Enabled Output. Unconnected or open collector TTL.
DVFL2800D Series
DVFL2800D-4.0 22
ENVIRONMENTAL SCREENING (100% Tested Per MIL-STD-883 as referenced to MIL-PRF-38534)
Test MIL-STD-883
Test Method, Condition
No Suffix
(Standard)
Non-QML
⑤
/ES
(Extended)
Non-QML
⑤
/HB
(HB)
Non-QML
⑤
/H
(Class H)
⑩
/KB
(KB)
Non-QML
⑤
/K
(Class K)
⑩
Non-
Destructive
Bond Pull
TM2023 ●
④
●
④
●
④
●
④ ● ●
Internal Visual
TM2010, TM2017,
TM2032
(MIL-STD-750, TM2072,
TM2073)
● ● ● ● ● ●
Temperature
Cycling
TM1010, Condition C
-65°C to 150°C, Ambient ● ● ● ●
TM1010, Condition B
-55°C to 125°C, Ambient ●
Constant
Acceleration
TM2001, 3000g, Y1
Direction ● ● ● ●
TM2001, 500g,
Y1 Direction ●
PIND ⑦ TM2020, Condition A ● ●
Pre Burn-In
Electrical 25°C ● ●
Burn-In
TM1015, 320 hrs,
125°C, Case Typ ● ●
TM1015, 160 hrs,
125°C, Case Typ ● ●
96 hrs, 125°C, Case Typ ●
24 hrs, 125°C, Case Typ ●
Final
Electrical
MIL-PRF-38534, Group A
Subgroups 1-6
-55°C, 25°C, 125°C ③
● ● ● ●
MIL-PRF-38534, Group A
Subgroups 1 and 4
25°C
● ●
Hermeticity
(Seal)
TM1014, Fine Leak,
Condition A2 ● ● ● ● ●
TM1014, Gross Leak,
Condition C ● ● ● ● ●
Gross Leak, Dip (1 x 10-
3
) ●
Radiography
⑧ TM2012 ● ●
External
Visual TM2009 ● ● ● ● ● ●
Notes: ① Contact Sales for more information concerning additional environmental screening and testing options desired.
② VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our sole discretion unless
specifically forbidden by customer contract.
③ 100% R&R testing with all test data included in product shipment.
④ Not required per MIL-PRF-38534. Test is performed for additional product quality assurance.
⑤ Non-QML products may not meet all requirements of MIL-PRF-38534.
⑥ Note intentionally not used.
⑦ PIND test Certificate of Compliance included in product shipment.
⑧ Radiographic test Certificate of Compliance and film(s) or data CD included in product shipment.
⑨ Note intentionally not used.
⑩ QML screening levels are not available for products with Up-Leaded or Down-Leaded pin extensions added.
DVFL2800D Series
DVFL2800D-4.0 23
ORDERING INFORMATION
DVFL 28 05 D DL /H - XXX
1 2 3 4 5 6 7
(1) (2) (3) (4)
Product Series Nominal Input
Voltage Output Voltage Number of Outputs
DVFL
28
28 Volts
05
6.3
9.5
12
15
±5 Volts
±6.3 Volts
±9.5 Volts
±12 Volts
±15 Volts
D
Dual
(5) (6) (7)
Package Option Screening Code1,2 Additional Screening
Code
None
DL
UL
Standard
Down-Lead
Up-Lead
None
/ES
/HB
/H
/KB
/K
Standard
Extended
Class HB
Class H
Class KB
Class K
Contact Sales
Notes: 1. Contact the VPT Inc. Sales Department for availability of Class H (/H) or Class K (/K) qualified products.
2. VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our
sole discretion unless specifically forbidden by customer contract.
Please contact your sales representative or the VPT Inc. Sales Department for more information
concerning additional environmental screening and testing, different input voltage, output voltage,
power requirement, source inspection, and/or special element evaluation for space or other higher
quality applications.
DVFL2800D Series
DVFL2800D-4.0 24
SMD (STANDARD MICROCIRCUIT DRAWING) NUM BERS
Standard Microcircuit
Drawing (SMD)
DVFL2800D Series
Similar Part Number
5962-0724401HXC
5962-0724401KXC
DVFL2805D/H
DVFL2805D/K
*T.B.D. DVFL286R3D/H
DVFL286R3D/K
*T.B.D. DVFL289R5D/H
DVFL289R5D/K
5962-0724402HXC
5962-0724402KXC
DVFL2812D/H
DVFL2812D/K
5962-0724403HXC
5962-0724403KXC
DVFL2815D/H
DVFL2815D/K
Do not use the DVFL2800D Series similar part number for SMD product acquisition. It is listed for
reference only. For exact specifications for the SMD product, refer to the SMD drawing. SMD’s can be
downloaded from the DLA Land and Maritime (Previously known as DSCC) website at
http://www.dscc.dla.mil/programs/smcr/. The SMD number listed above is for MIL-PRF-38534 Class H
screening, standard gold plated lead finish, and no RHA (Radiation Hardness Assurance) level. Please
reference the SMD for other screening levels, lead finishes, and radiation levels. All SMD products are
marked with a “Q” on the cover as specified by the QML certification mark requirement of MIL-PRF-
38534.
CONTACT INFORMATION
To request a quotation or place orders please contact your sales representative or the VPT Inc. Sales
Department at:
Phone: (425) 353-3010
Fax: (425) 353-4030
E-mail: vptsales@vpt-inc.com
All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors
or omissions. The products or specifications contained herein are subject to change without notice.
