STPR1020CTW
SUPER FAST
GLASS PASSIVATED RECTIFIER
REVERSE VOLTAGE – 200Volts
FORWARD CURRENT – 10 Amperes
FEATURES
•
Glass passivated chip
•
Superfast switching time for high efficiency
•
Low forward voltage drop and high current capability
•
Low reverse leakage current
MECHANICAL DATA
•
Case: JEDEC TO-220AB
•
Case Material: Plastic material, UL flammability
classification 94V-0
•
Moisture Sensitivity: Level 1 per J-STD-020C
•
Terminals: Lead Free Plating
•
Polarity indicator: As marked on the body
•
Weight: 0.08 ounces, 2.24 grams
•
Component in accordance to RoHs 2002/95/EC
•
ESD capability : HBM_8KV (JESD22-A114)
•
Maximum mounting torque = 0.5 N.m (5.1 Kgf.cm)
TO-220AB
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25
°C
ambient temperature unless otherwise specified.
PARAMETER SYMBOL
STPR1020CTW UNIT
Device marking code Note STPR1020CTW ---
Maximum Repetitive Peak Reverse Voltage V
RRM
200 V
Average Rectified Output Current See FIG.1 I
F
10 A
Peak Forward Surge Current 8.3ms single half sine-wave I
FSM
80 A
Storage temperature range T
STG
-55 to +150 °C
Operating junction temperature range T
J
-55 to +150 °C
PARAMETER TEST CONDITIONS SYMBOL
Min. Typ. Max. UNIT
Breakdown voltage IR=10uA Tj=25°C V
B
200 --- --- V
IF=5A Tj=25°C
Tj=125°C
---
---
0.94
0.80
1.10
1.00
Forward Voltage (1)
IF=10A Tj=25°C
Tj=125°C
V
F
---
---
1.05
0.92
1.25
1.20
V
Leakage Current VR=200V Tj=25°C
Tj=100°C I
R
---
---
0.05
1.50
10
250
uA
Reverse recovery time
IF= 0.5A
Irr= 0.25A
IR =1.0A
Tj=25°C t
rr
--- 22
30
Junction Capacitance VR=4V
Freq.=1MHz
Tj=25°C Cj --- 30 50 pF
THERMAL CHARACTERISTIC SYMBOL
Typical UNIT
Typical thermal resistance, Junction to Ambient (2) R
Θ
JA
12 °C/W
Typical thermal resistance, Junction to Lead (2) R
Θ
JL
6.0 °C/W
Typical thermal resistance, Junction to Case (2) R
Θ
JC
4.2 °C/W
Note :
REV. 7, Sep-2012, KTGA24
(1) 300us Pulse Width, 2% Duty Cycle.
(2) Thermal Resistance test performed in accordance with JESD-51. R
Θ
JL
is measured at the PIN 2
,
R
Θ
J
C
is measured at the top centre of body.
RATING AND CHARACTERISTIC CURVES
STPR1020CTW
FIG.1- FORWARD CURRENT DERATING CURVE
0
2
4
6
8
10
12
0 25 50 75 100 125 150 175
CASE TEMPERATURE, ( ℃)
AVERAGE FORWARD CURRENT, (A)
FIG.2- MAXIMUM NON-REPETITIVE SURGE
CURRENT
0
10
20
30
40
50
60
70
80
90
1 10 100
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE CURRENT, (A)
FIG.3- TYPICAL FORWARD CHARACTERISTICS
0.1
1
10
100
0.4 0.6 0.8 1 1.2 1.4
INSTANTANEOUS FORWARD VOLTAGE, (V)
INSTANTANEOUS FORWARD CURRENT, (A)
FIG.4- TYPICAL JUNCTION CAPACITANCE
1
10
100
0.1 1 10 100
REVERSE VOLTAGE, (V)
CAPACITANCE, (pF)
FIG.5- TYPICAL REVERSE CHARACTERISTICS
0.01
0.1
1
10
0 20 40 60 80 100 120
PERCENT OF RATED PEAK REVERSE VOLTAGE, (V)
INSTANTANEOUS REVERSE CURRENT,
(mA)
Legal Disclaimer Notice
Tj=100
℃
Tj=25℃
Tj=25℃
Tj=25℃, f=1MHz
8.3ms Single Half Sine-Wave
Tj=125℃
Tj=125℃
With heatsink_50*50*2 mm copper plate
Without heatsink
STPR1020CTW
Important Notice and Disclaimer
LSC reserves the right to make changes to this document and its products and specifications
at any time without notice. Customers should obtain and confirm the latest product
information and specifications before final design, purchase or use.
LSC makes no warranty, representation or guarantee regarding the suitability of its products
for any particular purpose, nor does LSC assume any liability for application assistance or
customer product design. LSC does not warrant or accept any liability with products which
are purchased or used for any unintended or unauthorized application.
No license is granted by implication or otherwise under any intellectual property rights of
LSC.
LSC products are not authorized for use as critical components in life support devices or
systems without express written approval of LSC.