Document 536-1 Shielded Power Inductors - LPS5010 * Very low DCR; excellent current handling * 5.0 x 5.0 mm footprint; less than 1.0 mm tall Designer's Kit C407 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 70 - 75 mg Ambient temperature -40C to +85C with Irms current, +85C to +125C with derated current Storage temperature Component: -40C to +125C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7 reel; 3000/13 reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.02 mm pocket depth Recommended pick and place nozzle OD: 5 mm; ID: 2.5 mm PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Isat (A)5Irms (A)6 DCR SRF Inductance2 max3 typ4 10% 20% 30% 20C 40C Part number1 20% (H) (Ohms) (MHz) drop drop drop rise rise LPS5010-471ML_ LPS5010-821ML_ LPS5010-152ML_ LPS5010-222ML_ LPS5010-332ML_ LPS5010-472ML_ LPS5010-562ML_ LPS5010-682ML_ LPS5010-103ML_ LPS5010-153ML_ 0.47 0.82 1.5 2.2 3.3 4.7 5.6 6.8 10 15 LPS5010-223ML_ LPS5010-333ML_ LPS5010-473ML_ LPS5010-683ML_ LPS5010-104ML_ 22 33 47 68 100 LPS5010-124ML_ LPS5010-154ML_ LPS5010-224ML_ LPS5010-334ML_ LPS5010-474ML_ 120 150 220 330 470 LPS5010-564ML_ 560 LPS5010-684ML_ 680 LPS5010-105ML_ 1000 0.038 0.058 0.072 0.100 0.125 290 195 168 144 105 3.1 2.3 1.7 1.4 1.1 3.3 2.5 1.8 1.5 1.2 3.4 2.6 1.9 1.6 1.3 2.0 1.2 0.90 0.88 0.86 2.7 1.5 1.4 1.2 1.1 0.175 0.240 0.255 0.350 0.500 76 75 71 51 39 0.95 0.90 0.82 0.66 0.55 1.1 0.97 0.90 0.72 0.59 1.1 1.00 0.93 0.74 0.62 0.85 0.75 0.74 0.73 0.68 0.98 0.92 0.85 0.80 0.75 0.670 1.05 1.45 2.00 3.10 32 26 20 15 12 0.47 0.38 0.31 0.26 0.21 0.51 0.42 0.34 0.29 0.23 0.53 0.43 0.36 0.30 0.24 0.46 0.40 0.33 0.25 0.21 0.62 0.55 0.44 0.35 0.28 11 9.0 7.0 5.5 4.5 0.20 0.18 0.15 0.12 0.090 0.22 0.20 0.16 0.13 0.11 0.23 0.21 0.17 0.14 0.11 0.19 0.17 0.15 0.13 0.11 0.25 0.23 0.20 0.185 0.150 3.50 4.25 6.25 8.60 12.7 15.7 20.0 28.0 4.0 0.090 0.10 0.10 3.7 0.090 0.097 0.10 3.0 0.087 0.096 0.10 0.10 0.135 0.090 0.125 0.080 0.110 1. Please specify termination and packaging codes: LPS5010-105MLC Termination: L = RoHS compliant silver-palladiumplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tinlead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF 10 MHz. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25C ambient. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 536-1 Revised 01/23/12 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 536-2 Shielded SMT Power Inductors - LPS5010 Series Typical L vs Current Typical L vs Frequency 10000 10000 1000 H 100 100 H 10 10 H 1 0.1 0.1 Current (A) 1 100 H 100 10 H 10 0.82 H 1 0.82 H 0.01 1000 H 1000 Inductance (H) Inductance (H) 1000 10 0.1 0.01 10 Frequency (MHz) 0.189 0.003* 4,80 0,076 Current Derating 120 110 100 0.189 0.003* 4,80 0,076 XXX X 90 80 70 Dash number 60 Winding direction Internal code 50 Recommended Land Pattern 40 30 20 10 0 25C Percent of rated current 1 0.1 Isat Irms -40 -20 0 20 0.060 1,50 40 60 80 100 120 140 0.0354 0.004 ** 0.039 typ 1,00 Ambient temperature (C) 0.134 3,40 0,90 0,10 0.217 5,51 0.0665 1,689 0.134 3,40 0.134 3,40 0.060 0.039 typ 1,00 1,52 are of the case not * Dimensions including the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. 0.134 3,40 0.217 5,51 optional tin-lead and tin-silver-copper ** For terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.005 inch (0,13 mm). Dimensions are in inches mm US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 536-2 Revised 01/23/12 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.