US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Shielded Power Inductors
–
LPS5010
Document 536-1
Document 536-1 Revised 01/23/12
DCR SRF Isat (A)5 Irms (A)6
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise
LPS5010-471ML_ 0.47 0.038 290 3.1 3.3 3.4 2.0 2.7
LPS5010-821ML_ 0.82 0.058 195 2.3 2.5 2.6 1.2 1.5
LPS5010-152ML_ 1.5 0.072 168 1.7 1.8 1.9 0.90 1.4
LPS5010-222ML_ 2.2 0.100 144 1.4 1.5 1.6 0.88 1.2
LPS5010-332ML_ 3.3 0.125 105 1.1 1.2 1.3 0.86 1.1
LPS5010-472ML_ 4.7 0.175 76 0.95 1.1 1.1 0.85 0.98
LPS5010-562ML_ 5.6 0.240 75 0.90 0.97 1.00 0.75 0.92
LPS5010-682ML_ 6.8 0.255 71 0.82 0.90 0.93 0.74 0.85
LPS5010-103ML_ 10 0.350 51 0.66 0.72 0.74 0.73 0.80
LPS5010-153ML_ 15 0.500 39 0.55 0.59 0.62 0.68 0.75
LPS5010-223ML_ 22 0.670 32 0.47 0.51 0.53 0.46 0.62
LPS5010-333ML_ 33 1.05 26 0.38 0.42 0.43 0.40 0.55
LPS5010-473ML_ 47 1.45 20 0.31 0.34 0.36 0.33 0.44
LPS5010-683ML_ 68 2.00 15 0.26 0.29 0.30 0.25 0.35
LPS5010-104ML_ 100 3.10 12 0.21 0.23 0.24 0.21 0.28
LPS5010-124ML_ 120 3.50 11 0.20 0.22 0.23 0.19 0.25
LPS5010-154ML_ 150 4.25 9.0 0.18 0.20 0.21 0.17 0.23
LPS5010-224ML_ 220 6.25 7.0 0.15 0.16 0.17 0.15 0.20
LPS5010-334ML_ 330 8.60 5.5 0.12 0.13 0.14 0.13 0.185
LPS5010-474ML_ 470 12.7 4.5 0.090 0.11 0.11 0.11 0.150
LPS5010-564ML_ 560 15.7 4.0 0.090 0.10 0.10 0.10 0.135
LPS5010-684ML_ 680 20.0 3.7 0.090 0.097 0.10 0.090 0.125
LPS5010-105ML_ 1000 28.0 3.0 0.087 0.096 0.10 0.080 0.110
• Very low DCR; excellent current handling
• 5.0 × 5.0 mm footprint; less than 1.0 mm tall
Designer’s Kit C407 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 70 – 75 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3000/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.02 mm pocket depth
Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
1. Please specify termination and packaging codes:
LPS5010-105MLC
Termination: L = RoHS compliant silver-palladium-
platinum-glass frit.
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-
lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
B = Less than full reel. In tape, but not
machine ready.
To have a leader and trailer added
($25 charge), use code letter C
instead.
D = 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same for
parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Shielded SMT Power Inductors
–
LPS5010 Series
Document 536-2
Document 536-2 Revised 01/23/12
Typical L vs Current Typical L vs Frequency
Current Derating
0.217
5,51
0.134
3,40
0.134
3,40
0.134
3,40
0.060
1,52
0.217
5,51
0.0665
1,689
Recommended
Land Pattern
0.134
3,40
0.189 ±0.003
4,80 ±0,076
0.0354 ±0.004
0,90 ±0,10
Winding
direction
Dash
number Internal
code
XXX X
0.189 ±0.003
4,80 ±0,076 *
*
Dimensions are of the case not
including the termination. Formaximum
overall dimensions including the
termination, add 0.005 in/0,13 mm.
*
0.060
1,50
0.039
1,00 typ
typ
0.039
1,00
**
Foroptional tin-lead and tin-silver-copper
terminations,dimensions are forthe
mounted part. Dimensions before mounting
can be an additional 0.005 inch (0,13 mm).
**
0.1
1
10
10000
1000
100
0.01 0.1
11
0
Frequency (MHz)
Inductance (µH)
0.82 µH
10 µH
100 µH
1000 µH
-40 -200 20 40 60 80 100 140120
Ambient temperature (°C)
Percent of rated current
120
110
100
90
80
70
60
50
40
30
20
10
0
Isat
Irms
25°C
0.1
1
10
10000
1000
100
0.01 0.1
11
0
Current (A)
Inductance (µH)
0.82 µH
10 µH
100 µH
1000 µH
Dimensions are in inches
mm
