RS3A Thru RS3M 3 AMP SURFACE MOUNT GLASS FAST RECOVERY RECTIFIER Mi FEATURES e Rating to 1000V PRV e For surface mount application e Reliable low cost construction utilizing molded plastic technique e Glass passivated junction e UL recognized 94V-O plastic material e High temperature soldering: 250 C/10 seconds at terminal e Fast switching for high efficiency Mi Mechanical Data e Case: Molded Plastic e Polarity: Indicated on cathode e Weight: 0.007 ounces, 0.21 grams Mi Maximum Ratings & Characteristics Ratings at 25 C ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% @ Outline Drawing .125(3.18) SMC 115(2.92) j | .245(8.22) ,220(5.50) .280(7.11) .200(8.0) ppg 2012.31) -006(.15) .103(2.62) .079(2.00) ,960(1,52) *>>$"1 008.21) 0300-78) -004(.10) mons Dimensions in inches and (millimeters) RS3A | RS3B | RS3D | RS3G | RS3J | RS3K | RS3M | Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Vv Maximum RMS Input Voltage Vrms 35 70 140 280 420 560 700 Vv Maximum DC Blocking Voltage Vbc 50 100 200 400 600 800 1000 Vv Maximum Average Forward @ TL=75C I avy 30 A Output Current Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave IFsm 100 A Superimposed On Rated Load Maximum DC Forward Voltage Drop Per Element Ve 13 V At 3A DC Maximum Reverse Current At Rated @ Ta =25C Ir 5 pA DC Blocking Voltage per Element @ Ta =125C 250 pA Maximum Reverse Recovery Time *(See Note) ter 150 | 250 500 ns Typical Junction Capacitance **(See Note) Cy 50 pF Typical Thermal Resistance***(See Note) RcTHJL) 10 C/W Typical Thermal Resistance***(See Note) R(tHJa) 50 C Operating Temperature Range Ty -65 to +150 c Storage Temperature Range TstG -65 to +150 C Note: Test Conditions: IF = 0.5A, IR = 1.0A, Irr = 0.254 **Measured at 1.0MHz and applied reverse voltage of 4.0V DC Collmer Semiconductor, Inc.