VS-50SQ... Series, VS-50SQ...-M3 Series
www.vishay.com Vishay Semiconductors
Revision: 19-Sep-11 1Document Number: 93355
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Schottky Rectifier, 5 A
FEATURES
175 °C TJ operation
Low forward voltage drop
High frequency operation
High purity, high temperature epoxy
encapsulation for enhanced mechanical
strength and moisture resistance
Guard ring for enhanced ruggedness and
long term reliability
Compliant to RoHS Directive 2002/95/EC
Designed and qualified for commercial level
Halogen-free according to IEC 61249-2-21 definition
(-M3 only)
DESCRIPTION
The VS-50SQ... axial leaded Schottky rectifier series has
been optimized for low reverse leakage at high temperature.
The proprietary barrier technology allows for reliable
operation up to 175 °C junction temperature. Typical
applications are in switching power supplies, converters,
freewheeling diodes, and reverse battery protection.
PRODUCT SUMMARY
Package DO-204AR
IF(AV) 5 A
VR60 V, 80 V, 100 V
VF at IF0.52 V
IRM max. 7.0 mA at 125 °C
TJ max. 175 °C
Diode variation Single die
EAS 7.5 mJ
Cathode Anode
DO-204AR
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
IF(AV) Rectangular waveform 5 A
VRRM Range 60 to 100 V
IFSM tp = 5 μs sine 1900 A
VF5 Apk, TJ = 125 °C 0.52 V
TJRange - 55 to 175 °C
VOLTAGE RATINGS
PARAMETER SYMBOL VS-50SQ060
VS-50SQ060-M3
VS-50SQ080
VS-50SQ080-M3
VS-50SQ100
VS-50SQ100-M3 UNITS
Maximum DC reverse voltage VR60 80 100 V
Maximum working peak reverse voltage VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current
See fig. 5 IF(AV) 50 % duty cycle at TC = 119 °C, rectangular waveform 5
A
Maximum peak one cycle
non-repetitive surge current
See fig. 7
IFSM
5 μs sine or 3 μs rect. pulse Following any rated load
condition and with rated
VRRM applied
1900
10 ms sine or 6 ms rect. pulse 290
Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 1.0 A, L = 15 mH 7.5 mJ
Repetitive avalanche current IAR
Current decaying linearly to zero in 1 μs
Frequency limited by, TJ maximum VA = 1.5 x VR typical 1.0 A
VS-50SQ... Series, VS-50SQ...-M3 Series
www.vishay.com Vishay Semiconductors
Revision: 19-Sep-11 2Document Number: 93355
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Pulse width < 300 μs, duty cycle < 2 %
ELECTRICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum forward voltage drop
See fig. 1 VFM (1)
5 A TJ = 25 °C 0.66
V
10 A 0.77
5 A TJ = 125 °C 0.52
10 A 0.62
Maximum reverse leakage current
See fig. 2 IRM (1) TJ = 25 °C VR = Rated VR
0.55 mA
TJ = 125 °C 7
Maximum junction capacitance CTVR = 5 VDC, (test signal range 100 kHz to 1 MHz), 25 °C 500 pF
Typical series inductance LSMeasured lead to lead 5 mm from body 10 nH
Maximum voltage rate of change dV/dt Rated VR10 000 V/μs
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction and storage
temperature range TJ, TStg - 55 to 175 °C
Maximum thermal resistance,
junction to lead RthJL
DC operation; see fig. 4
1/8" lead length 8.0
°C/W
Typical thermal resistance,
junction to air RthJA 44
Approximate weight 1.4 g
0.049 oz.
Marking device Case style DO-204AR (JEDEC)
50SQ060
50SQ080
50SQ100
VS-50SQ... Series, VS-50SQ...-M3 Series
www.vishay.com Vishay Semiconductors
Revision: 19-Sep-11 3Document Number: 93355
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage
Fig. 3 - Typical Junction Capacitance vs.
Reverse Voltage
Fig. 4 - Maximum Thermal Impedance ZthJL Characteristics
I
F
- Instantaneous Forward Current (A)
V
FM
- Forward Voltage Drop (V)
93355_01
0.1
1
10
100
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
T
J
= 175 °C
T
J
= 125 °C
T
J
= 25 °C
0.0001
0.001
0.01
0.1
1
10
100
0 20 40 60 80 100
TJ = 175 °C
TJ = 150 °C
TJ = 125 °C
TJ = 100 °C
TJ = 75 °C
TJ = 25 °C
TJ = 50 °C
I
R
- Reverse Current (mA)
V
R
- Reverse Voltage (V)
93355_02
CT - Junction Capacitance (pF)
VR - Reverse Voltage (V)
93355_03
100
1000
0 20 40 60 80 100
TJ = 25 °C
= 1/8 inch
Single pulse
(thermal resistance)
PDM
t2
t1
Notes:
1. Duty factor D = t1/t2
2. Peak TJ = PDM x ZthJC + TC
D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08
D = 0.01
0.01
0.1
10
1
0.00001 0.0001 0.001 0.01 0.1 1 10 100
t
1
- Rectangular Pulse Duration (s)
93355_04
Z
thJC
- Thermal Impedance (°C/W)
VS-50SQ... Series, VS-50SQ...-M3 Series
www.vishay.com Vishay Semiconductors
Revision: 19-Sep-11 4Document Number: 93355
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current
Fig. 6 - Forward Power Loss Characteristics
Fig. 7 - Maximum Non-Repetitive Surge Current
Fig. 8 - Unclamped Inductive Test Circuit
Allowable Case Temperature (°C)
I
F(AV)
- Average Forward Current (A)
93355_05
145
150
155
160
165
170
175
0 2 4 6 8
DC
= 1/8 inch
RthJL (DC) = 8.0 °C/W
Average Forward Current - IF(AV) (A)
Average Power Loss (W)
93355_06
0
0.5
1
1.5
2
2.5
3
3.5
012345678
DC
D = 0.08
D = 0.17
D = 0.25
D = 0.33
D = 0.50
RMS Limit
100
10 100
tp - Square Wave Pulse Duration (µs)
IFSM - Non-Repetitive Surge Current (A)
1000
93355_07
1000 10 000
10 000
At any rated load condition
and with rated VRRM applied
following surge
Current
monitor
High-speed
switch
D.U.T.
Rg = 25 Ω
+
Freewheel
diode Vd = 25 V
L
IRFP460
40HFL40S02
VS-50SQ... Series, VS-50SQ...-M3 Series
www.vishay.com Vishay Semiconductors
Revision: 19-Sep-11 5Document Number: 93355
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORDERING INFORMATION TABLE
ORDERING INFORMATION (Example)
PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION
VS-50SQ060 300 300 Bulk
VS-50SQ060TR 1500 1500 Tape and reel
VS-50SQ060-M3 300 300 Bulk
VS-50SQ060TR-M3 1500 1500 Tape and reel
VS-50SQ080 300 300 Bulk
VS-50SQ080TR 1500 1500 Tape and reel
VS-50SQ080-M3 300 300 Bulk
VS-50SQ080TR-M3 1500 1500 Tape and reel
VS-50SQ100 300 300 Bulk
VS-50SQ100TR 1500 1500 Tape and reel
VS-50SQ100-M3 300 300 Bulk
VS-50SQ100TR-M3 1500 1500 Tape and reel
1
- 50 = Current x 10
2
- S = DO-204AR
3
- Q = Schottky Q series
4
- Voltage rating
5
- TR = Tape and reel package
None = Bulk package
060 = 60 V
080 = 80 V
100 = 100 V
Device code
62 43 5
50 S Q 100 TRVS-
1
-M3
7
- Vishay Semiconductors product
None = Lead (Pb)-free and RoHS compliant
-M3 = Halogen-free, RoHS compliant, and terminations lead (Pb)-free
- Environmental digit
6
7
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95243
Part marking information www.vishay.com/doc?95325
Packaging information www.vishay.com/doc?95338
SPICE model www.vishay.com/doc?95394
Outline Dimensions
www.vishay.com Vishay Semiconductors
Revision: 29-Aug-11 1Document Number: 95243
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Axial DO-204AR
DIMENSIONS in millimeters (inches)
6.35 (0.250)
6.10 (0.240)
9.52 (0.375)
9.27 (0.365)
DIA.
6.35 (0.250)
6.10 (0.240)
9.52 (0.375)
9.27 (0.365)
DIA.
1.32 (0.052)
1.22 (0.048)
(2 places)
27.94 (1.10) MIN.
(2 places)
27.94 (1.10) MIN.
(2 places)
2.54 (0.100) MAX.
Flash (2 places)
DIA.
1.32 (0.052)
1.22 (0.048)
(2 places)
DIA.
Cathode band
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.