1/2
© 2018 ROHM Co., Ltd.
No. 60UG062E Rev.001
Apr.2018
User’s Guide
Pressure Sensor
BM1383AGLV-EVK-001 Manual
BM1383AGLV-EVK-001 is an evaluation board for BM1383AGLV, which is a ROHM Pressure Sensor. This User’s Guide is about how to use
BM1383AGLV-EVK-001 together with SensorShield*1. *1 SensorShield is sold as Shield-EVK-001.
Preparation
Arduino Uno 1pc
Personal Computer installed Arduino IDE 1pc
Requirement : Arduino 1.6.7 or higher
Please use Arduino IDE which can be
downloaded from the link below:
http://www.arduino.cc/
USB cable for connecting Arduino and PC 1pc
SensorShield 1pc
BM1383AGLV-EVK-001 1pc
Setting
1. Connect the Arduino and the SensorShield (Figure 1)
Figure 1. Connection between the Arduino and the
SensorShield
2. Connect BM1383AGLV-EVK-001 to the socket of I2C
area on the SensorShield (Figure 2)
3. Set Voltage of the SensorShield to 1.8V or 3.0V (Figure 2)
Figure 2. Connection between BM1383AGLV-EVK-001
and the SensorShield
4. Connect the Arduino to the PC using a USB cable
5. Download BM1383AGLV.zip from the link below:
http://www.rohm.com/web/global/sensor-shield-support
6. Launch Arduino IDE
7. Select [Sketch]->[Include Library]->[Add.ZIP library...],
install BM1383AGLV.zip
8. Select [File]->[Examples]->[BM1383AGLV]->[example]->
[BM1383AGLV]
USB connecter
SensorShield
2/2
User’s Guide
BM1383AGLV-EVK-001 Manual
© 2018 ROHM Co., Ltd.
No. 60UG062E Rev.001
Apr.2018
Measurement
1. Select [Tools] and check the contents enclosed in the red
frame. (Figure 3) Board should be “Arduino/Genuino Uno”
and Port should be COMxx (Arduino/Genuino Uno). COM
port number is different in each environment.
Figure 3. COM Port setting
2. Write the program by pressing right arrow button for
upload (Figure 4)
3. Wait for the message ”Done uploading” (Figure 4)
Figure 4. Uploading
4. Select [Tools]->[Serial Monitor] (Figure 5)
Figure 5. Tools Setting
5. Check log of Serial Monitor (Figure 6)
Figure 6. Serial Monitor
Board Information
Figure 7. Picture of the board
Table 1. Parts information