VTSR, VSSR, VSOR
Vishay Thin Film
Document Number: 60003 For technical questions, contact: thin-film@vishay.com www.vishay.com
Revision: 14-Nov-08 21
Molded, 25 or 50 Mil Pitch, Dual-In-Line Resistor Networks
SURFACE MOUNT
NETWORKS
Vishay Thin Film resistor networks are designed to be used
in either analog or digital circuits. The use of thin film
resistive elements within the network allows you to achieve
an infinite number of very low noise and high stability circuits
for industrial, medical and scientific instrumentation. Vishay
Thin Film resistor networks are packaged in molded plastic
packages with sizes that are recognized throughout the
world. The rugged packaging offers superior environmental
protection and consistent dimensions for ease of placement
with automatic SMT equipment. Vishay Thin Film stocks
many designs and values for off-the-shelf convenience.
With Vishay Thin Film you can depend on quality products
delivered on time with service backing the product.
FEATURES
•Lead (Pb)-free standard
•Reduces total assembly costs
•Compatible with automatic surface mounting
equipment
•UL 94 V-0 flame resistant
•Thin Film Tantalum Nitride on silicon
•Choice of package sizes: VTSR (TSSOP)
JEDEC MC-153, VSSR (SSOP or QSOP) JEDEC MS-137,
VSOR (SOIC narrow) JEDEC MS-012
•Moisture sensitivity level 1 (per IPC/JEDEC STD-20C)
•Isolated/Bussed/dDual terminator/Differential terminator
circuits
TYPICAL PERFORMANCE
SCHEMATICS RESISTORS WITH ONE PIN COMMON
The 01 circuit provides nominally equal resistors connected
between a common pin and a discrete PC board pin.
Commonly used in the following applications:
• MOS/ROM Pull-up/Pull-down • TTL Input Pull-down
• Open Collector Pull-up • Digital Pulse Squaring
• "Wired OR" Pull-up • TTL Unused Gate Pull-up
• Power Driven Pull-up • High Speed Parallels Pull-up
Broad selection of standard values available
03 SCHEMATICS ISOLATED RESISTORS
The 03 circuit provides nominally equal resistors isolated
from all others and wired directly across. Commonly used in
the following applications:
• "Wired OR" Pull-up • Long-line Impedance Balancing
• Power Driven Pull-up • LED Current Limiting
• Powergate Pull-up • ECL Output Pull-down
• Line Termination • TTL Input Pull-down
Broad selection of standard values available
05 SCHEMATICS
DUAL-LINE TERMINATOR; PULSE SQUARING
The 05 circuit contains pairs of resistors connected between
ground and a common line. The junctions of these resistor
pairs are connected to the input leads. The 05 circuits are
designed for dual-line termination and pulse squaring.
Standard values are:
VSSR1605 - R1 = 220 Ω, R2 = 330 Ω R1 = 220 Ω, R2 = 1.8 kΩ
R1 = 330 Ω, R2 = 470 Ω R1 = 1.5 kΩ, R2 = 3.3 kΩ
VSSR2005 - R1 = 220 Ω, R2 = 330 Ω
47 SCHEMATICS DIFFERENTIAL TERMINATOR
The 47 schematic consists of series resistor sections
connected between Vcc and Ground. Each contains
3 resistors of 2 different resistance values.
Standard values are:
VSSR20 and VTSR20 - R1 = 270 Ω, R2 = 120 Ω
VSSR16 and VTSR16 - R1 = 330 Ω, R2 = 220 Ω
R1 = 330 Ω, R2 = 150 Ω
Actual Size
ABS TRACKING
TCR 100 NA
ABS RATIO
TOL 5, 2, 1 NA
RoHS
COMPLIANT
Resistance Range:
10 Ω to 47 kΩ
Lead #1
01 SCHEMATIC
Lead #1
Resistance Range:
10
Ω
to 47 k
Ω
Lead #1
R1
R R2R2R2
R2
R2 R2
R1 R1 R1
R1 R1 R1
R1
R2 R2
R1 R1 R1
R2
R1
R2
R1
R2
R1
1
Lead #1
V
CC
GND
R
1
R
2
R
3