TPD2F702 www.ti.com SLLS986A - FEBRUARY 2010 - REVISED MARCH 2010 TWO-CHANNEL EMI FILTER FOR AUDIO SPEAKER/AVIF CONNECTOR Check for Samples: TPD2F702 FEATURES 1 * * * * Two-Channel EMI Filter for Audio Speaker or AVIF Ports Best in class EMI Noise Filtering for Audio Applications (-3dB Bandwidth = 1.2MHz) > 50 dB Crosstalk Attenuation at 100 MHz Integrated ESD Protection Exceeds IEC61000-4-2 (Level 4) at the Connector Ports (Level 4) on the Connector Side - 15-kV Human-Body Model (HBM) - 30-kV IEC 61000-4-2 Contact Discharge - 30-kV IEC 61000-4-2 Air-Gap Discharge * * * * Pi-Style (C-R-C) Filter Configuration (C1 = 30 pF, R = 15 , C2 = 5000 pF) Ultra Low Leakage Current (100-nA max) Space-Saving WCSP Package and Flow-Through Pin Mapping Industrial Temperature Range: -40C to 85C APPLICATIONS * * * * Mobile Phones PDAs Headsets Portable Gaming YFK PACKAGE TOP VIEW BOTTOM VIEW (Bump Facing Down) (Bump Facing Up) A2 A1 A1 B2 C2 A2 B2 C1 C1 C2 TERMINAL ASSIGNMENTS 1 2 A Ch 1 Input, ESD Level 1 Ch 1 Output, ESD Level 4 B Depopulated Ball Ground C Ch 2 Input, ESD Level 1 Ch 2 Output, ESD Level 4 DESCRIPTION/ORDERING INFORMATION The TPD2F702 is a two-channel EMI filter for audio interface applications. With the integration of 5000 pF capacitor in a space saving low noise WCSP package, the TPD2F702 offers superior EMI noise supression (2MHz to 6GHz) compared to discrete implementation. The device is optimized for AVIF connector or speaker port interfaces. This low-pass filter array also provides system level ESD protection to eliminate the need for external ESD clamps. The TPD2F702 exceeds 30-kV ratings per IEC6100-4-2 Contact and Air-Gap specifications. It is primarily used in the mobile-phone audio headphone speaker interface, but can be used in other audio applications. The TPD2F702 is a highly integrated device designed to suppress EMI/RFI noise in all systems subjected to electromagnetic interferences. This filter includes ESD protection circuitry which prevents damage to the application when subjected to ESD surges far exceeding IEC 61000-4-2 (Level 4). The TPD2F702 is specified for -40C to 85C operation. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2010, Texas Instruments Incorporated TPD2F702 SLLS986A - FEBRUARY 2010 - REVISED MARCH 2010 www.ti.com ORDERING INFORMATION PACKAGE (1) TA -40C to 85C (1) (2) WCSP - YFK (2) ORDERABLE PART NUMBER Tape and reel TPD2F702YFKR TOP-SIDE MARKING 5V Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI Web site at www.ti.com. SCHEMATIC (One of Two Channels) Ch_In R = 15 W Ch_Out C1 = 30 pF IEC 61000-4-2 (Level 1) ESD C2 = 5000 pF IEC 61000-4-2 (Level 4) ESD GND ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) VIO Continuous IO voltage MIN MAX -5.5 5.5 V 200 mW 85 C 260 C Total power dissipation TA Characterized free-air operating temperature range -40 Reflow temperature 1.6 mm (1/16 inch) from case for 10 seconds (1) UNIT Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability. RECOMMENDED OPERATING CONDITIONS VIO Continuous IO voltage MIN MAX -5 5 UNIT V ESD RATINGS ESD TYPE IEC 61000-4-2 Contact Discharge IEC 61000-4-2 Air-Gap Discharge Human-Body Model 2 TERMINAL TYP Input 4 Output 30 Input 4 Output 30 Input 15 Output 15 Submit Documentation Feedback UNIT kV kV kV Copyright (c) 2010, Texas Instruments Incorporated Product Folder Link(s): TPD2F702 TPD2F702 www.ti.com SLLS986A - FEBRUARY 2010 - REVISED MARCH 2010 ELECTRICAL CHARACTERISTICS TA = -40C to 85C (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX II = 1 mA Input pin 14 18.2 IO = 1 mA Output pin 14 18.2 VBR DC break-down voltage IIO Current from input or output VI or VO = 2.5 V Input, output pins C1 Capacitance of the input terminal VI = 0 V, VOSC = 30 mV, f = 100 kHz Input pin C2 Capacitance of the output terminal VO = 0 V, VOSC = 30 mV, f = 100 kHz Output pin R Series resistor 0.01 12 Rdyn Dynamic resistance II = 1.5 A or IO = 1.5 A fC Cut-off frequency ZSOURCE = 50 , ZLOAD = 50 0.1 UNIT V mA 30 pF 5000 pF 15 Output clamp 1 Input clamp 3 18 1.2 MHz TYPICAL OPERATING CHARACTERISTICS S21 0 0.0 -10 -5.0 -20 3 dB drop/bias of 0.0 V -3dB = 1.18 MHz -10.0 -30 3 dB drop/bias of 2.5 V -3 dB = 1.28 MHz -40 -20.0 -50 dB Insertion Loss (dB) -15.0 -25.0 -60 -30.0 -70 -80 -35.0 -45.0 A2-C1 -100 (DC Bias @ 0.0V) (DC Bias @ 2.5V) -110 1.00E+05 -50.0 1.00E+05 A1-C2 -90 -40.0 1.00E+06 1.00E+07 1.00E+08 1.00E+09 1.00E+06 1.00E+07 1.00E+08 1.00E+09 frequency(Hz) Frequency (Hz) Figure 1. Insertion Loss Figure 2. Channel-to-Channel Crosstalk with 50 Termination for the Non-Measuring Pins Submit Documentation Feedback Copyright (c) 2010, Texas Instruments Incorporated Product Folder Link(s): TPD2F702 3 TPD2F702 SLLS986A - FEBRUARY 2010 - REVISED MARCH 2010 www.ti.com TYPICAL OPERATING CHARACTERISTICS (continued) 0 1.00E-08 -10 8.00E-09 -20 IO Capacitance (Farad) -30 -40 dB -50 -60 6.00E-09 4.00E-09 -70 A1-C2 A2-C1 -80 2.00E-09 -90 0.00E+00 -100 -5 -4 -3 -2 -1 0 1 2 3 4 5 DC Bias (Volt) -110 1.00E+05 1.00E+06 1.00E+07 1.00E+08 1.00E+09 frequency(Hz) Figure 4. IO Capacitance Versus IO Voltage (Measured at f = 100 kHz) 120 40 100 20 80 0 60 -20 Amplitude (V) Amplitude (V) Figure 3. Channel-to-Channel Crosstalk with No Termination for the Non-Measuring Pins 40 20 -40 -60 0 -80 -20 -100 -40 0 25 50 75 100 125 150 175 200 -120 0 25 Time (ns) 75 100 125 150 175 200 Time (ns) Figure 5. IEC Clamping Waveforms +8 kV Contact, Out Stressed and In Measured 4 50 Figure 6. IEC Clamping Waveforms -8 kV Contact, Out Stressed and In Measured Submit Documentation Feedback Copyright (c) 2010, Texas Instruments Incorporated Product Folder Link(s): TPD2F702 TPD2F702 www.ti.com SLLS986A - FEBRUARY 2010 - REVISED MARCH 2010 40 100 20 80 0 60 -20 Amplitude (V) Amplitude (V) TYPICAL OPERATING CHARACTERISTICS (continued) 120 40 20 -40 -60 0 -80 -20 -100 -40 -120 0 25 50 75 100 125 150 175 200 0 25 Time (ns) 50 75 100 125 150 175 200 Time (ns) Figure 7. IEC Clamping Waveforms +15 kV Contact, Out Stressed and In Measured Figure 8. IEC Clamping Waveforms -15 kV Contact, Out Stressed and In Measured Submit Documentation Feedback Copyright (c) 2010, Texas Instruments Incorporated Product Folder Link(s): TPD2F702 5 PACKAGE MATERIALS INFORMATION www.ti.com 13-Aug-2011 TAPE AND REEL INFORMATION *All dimensions are nominal Device TPD2F702YFKR Package Package Pins Type Drawing SPQ DSBGA 3000 YFK 5 Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 180.0 8.4 Pack Materials-Page 1 1.02 B0 (mm) K0 (mm) P1 (mm) 1.42 0.62 4.0 W Pin1 (mm) Quadrant 8.0 Q2 PACKAGE MATERIALS INFORMATION www.ti.com 13-Aug-2011 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPD2F702YFKR DSBGA YFK 5 3000 210.0 185.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IF and ZigBee(R) Solutions www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated