Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com The ACTF59-14/959.5-914.5/T039 is a low-loss, compact and economical surface-acoustic-wave (SAW) filter in a low-profile metal TO-39 case. It is designed as RF duplexer for cordless telephone CT1. Centre frequency is 959.500 / 914.500 MHz. 1. Package Dimension (TO-39) 2. Pin Configuration 1 Port 1 / Port 2 2 Antenna 3 Port 2 / Port 1 4 Case Ground Dimensions Data (Unit: mm) A 9.350.10 B 5.080.10 C 3.400.10 D 3.000.20 E 0.450.20 3. Test Circuit 4. Features l l l Compact RF duplexer for cordless telephone CT1 High stability and reliability with good performance No matching network required for operation at 50 In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 5. Performance 5-1.Maximum Ratings Item Symbol Rating Units Input Power Pin 15 dBm DC Voltage VDC 3 V Operating Temperature Range TA -10 ~ +60 C Storage Temperature Range Tstg -40 ~ +85 C 5-2.Electronic Characteristics Characteristic Centre frequency Port 1 Port 2 Minimum Typical Maximum Units --- 914.500 959.500 --- MHz MHz --- 3.5 3.5 4.5 4.5 dB dB --- 0.7 0.7 2.0 2.0 dB dB 30 35 -- dB 30 35 -- dB -- -30 -- ppm/K fC Insertion loss Port 1: 914.000...915.000 MHz Port 2: 959.000...960.000 MHz IL Amplitude ripple(p-p) Port 1: 914.000...915.000 MHz Port 2: 959.000...960.000 MHz Absolute attenuation Port 1 959.000...960.000 MHz Absolute attenuation Port 2 914.000...915.000 MHz Temperature coefficient of frequency TCf iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. 3. 4. 5. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 test system with VSWR1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04