FS Series The FS series Super Capacitors are ideal as short-time (30 minutes max.) backup devices in small and lightweight systems. 5.5 VDC (0.022 F to 1.0 F), 11 VDC (0.47 F and 1.0 F only) and 12 VDC (1.0 F and 5.0 F only) Features * Ideal for supplying current of several hundred A to several mA for short time Applications * Backup source for microcomputers and buffer for momentary high-current loads (for example, motors) Part Number System FS 0H 473 Z F Environmental Impact Reduced Product Capacitance tolerance: +80%, -20% Capacitance: 0.047 F First two digits represent significant figures. Third digit specifies number of zeros to follow microfarad code. Maximum Operating voltage: 0 H: 5.5 VDC 1 A: 11 VDC 1 B: 12 VDC Super Capacitor: FS series 42 Super Capacitors Vol.07 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2007.08.03 P0862SUCA16VOL07E Markings Marking of sleeve Sleeve V5 Date code 001 FS V5 Lead terminal connected to the metal can case 5.5V FS 0.47F 5.5V 0.47F Negative polarity identification mark - Negative polarity Dimensions mm (inch) 0.3 Min. H Max. L Min. Dimensions Part No. D H P d1 d2 Weight L g (oz) 11.5 8.5 5.08 0.4 1.2 2.7 1.6 FS0H223ZF (0.453) (0.335) (0.200) (0.016) (0.047) (0.106) (0.057) Sleeve 13.0 8.5 5.08 0.4 1.2 2.2 2.6 FS0H473ZF (0.512) (0.335) (0.200) (0.016) (0.047) (0.087) (0.092) P 0.5 16.5 8.5 5.08 0.4 1.2 2.7 4.1 FS0H104ZF (0.650) (0.335) (0.200) (0.016) (0.047) (0.106) (0.145) D 0.5 16.5 13.0 5.08 0.4 1.2 2.7 5.3 FS0H224ZF (0.650) (0.512) (0.200) (0.016) (0.047) (0.106) (0.187) 21.5 13.0 7.62 0.6 1.2 3.0 10 FS0H474ZF (0.846) (0.512) (0.300) (0.024) (0.047) (0.118) (0.353) d 1 0.1 28.5 14.0 10.16 0.6 1.4 6.1 18 FS0H105ZF (1.122) (0.551) (0.400) (0.024) (0.055) (0.240) (0.635) 28.5 25.5 10.16 0.6 1.4 6.1 32.0 FS1A474ZF (1.122) (1.004) (0.400) (0.024) (0.055) (0.240) (1.129) d 2 0.1 28.5 31.5 10.16 0.6 1.4 6.1 35.0 FS1A105ZF (1.122) (1.240) (0.400) (0.024) (0.055) (0.240) (1.235) Lead Lead (case) 28.5 38.0 10.16 0.6 1.4 6.1 40 FS1B105ZF (1.122) (1.496) (0.400) (0.024) (0.055) (0.240) (1.411) - Negative polarity 44.8 60.0 20.0 1.0 1.4 9.5 160 FS1B505ZF (1.764) (2.361) (0.787) (0.040) (0.055) (0.240) (5.644) Note: Weight is typical. Standard Ratings Nominal Capacitance Max. ESR (at 1 kHz) () Max. Current at 30 minutes (at 1 kHz) (mA) Part Number Max. Operating Voltage (V) FS0H223ZF 5.5 0.022 0.033 60 0.033 FS0H473ZF 5.5 0.047 0.072 40 0.071 FS0H104ZF 5.5 0.10 0.15 25 0.15 FS0H224ZF 5.5 0.22 0.33 25 0.33 FS0H474ZF 5.5 0.47 0.75 13 0.71 FS0H105ZF 5.5 1.0 1.3 7 1.5 FS1A474ZF 11.0 0.47 0.60 7 1.41 FS1A105ZF 11.0 1.0 1.3 7 3.0 FS1B105ZF 12.0 1.0 1.3 7.5 3.6 FS1B505ZF 12.0 5.0 6.5 4.0 18.0 Charge System (F) Discharge System (F) Super Capacitors Vol.07 43 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2007.08.03 P0862SUCA16VOL07E Specifications: FS Series Specifications Item Operating Temperature Range Maximum Operating Voltage Nominal Capacitance Range Capacitance Allowance Equivalent Series Resistance Current (30-minutes value) -25C to +70C 5.5 VDC, 11 VDC, 12 VDC Refer to standard ratings Temperature Variation of Characteristics Phase 5 Phase 6 Refer to characteristics measuring method. +80%, -20% Refer to standard ratings Refer to standard ratings Capacitance Equivalent series resistance Current (30-minute value) More than 90% of initial requirement Not to exceed 120% of initial requirement Not to exceed 120% of initial requirement Appearance No obvious abnormality Capacitance Equivalent series resistance Capacitance Equivalent series resistance Current (30-minute value) Capacitance Equivalent series resistance Current (30-minute value) 50% or higher of initial value 3 or less times initial value 150% or below of initial value Satisfy initial standard value 1.5 CV (mA) or below Within 20% of initial value Satisfy initial standard value Satisfy initial standard value Surge Voltage Phase 2 Test Conditions Conforming to JIS C 5102-1994 Refer to characteristics measuring method. Refer to characteristics measuring method. Conforms to 7.14 Surge voltage: 6.3 V (5.5 V products) 12.6 V (11 V products) 13.6 V (12 V products) Temperature: 70 2C Chargs: 30 seconds Discharge: 9 min. 30 sec. Number of cycles 1000 cycles. Series resistance: 0.022 F 560 0.047 F 300 0.1 F 150 0.22 F 56 0.47 F 30 1F 15 5F 10 Discharge resistance: 0 Conforms to 7.12 Phase 1: +25 2C Phase 2: -25 2C Phase 3: -40 2C Phase 4: +25 2C Phase 5: +70 2C Phase 6: +25 2C Conforms to 8.1.2 (1) 5.5 VDC Lead Strengh (Tensile) No loosening nor permanent damage of the leads 11 VDC 12 VDC Vibration Resistance Solderability Soldering Heat Resistance Temperature Cycle Humidity Resistance High Temperature Load Capacitance Equivalent series resistance Current (30-minute value) Appearance Conforms to 8.2.3 Satisfy initial standard value No obvious abnormality 3/4 or more of the pin surface should be covered with new solder Capacitance Equivalent series resistance Current (30-minute value) Appearance Capacitance Equivalent series resistance Current (30-minute value) Appearance 0.022 F to 0.22 F: 1 kg 10 sec 0.47 F to 1.0 F: 2.5 kg 10 sec 2.5 kg 10 sec 2.5 kg 10 sec Satisfy initial standard value No obvious abnormality Satisfy initial standard value No obvious abnormality Capacitance 90% or higher of initial standard value (5.5 V products) Within 20% of initial value (11 V, 12 V products) Equivalent series resistance Current (30-minute value) Appearance 1.2 or less times initial standard value 1.2 or less times initial standard value No obvious abnormality Capacitance 85% or higher of initial standard value (5.5 V products) Within 30% of initial value (11 V, 12 V products) Equivalent series resistance Current (30-minute value) Appearance Twice or less times initial standard value Twice or less times initial standard value No obvious abnormality Frequency: 10 to 55 Hz Test duration: 6 hours Conforms to 8.4 Solder temperature: 245 5C Dipping duration: 5 0.5 sec. Should be dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 8.5 Solder temperature: 260 10C Dipping duration: 10 1 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 9.3 Temperature condition: -25C normal temperature +70C normal temperature Number of cycles: 5 cycles Conforms to 9.5 Temperature: 40 2C Relative humidity: 90 to 95% RH Test duration: 240 8 hours Conforms to 9.10 Temperature: 70 2C Voltage applied: Maximum operating voltage Series protection resistance: 0 +48 Test duration: 1000 0 hours 44 Super Capacitors Vol.07 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2007.08.03 P0862SUCA16VOL07E