●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2010.11.8 9565SCAVOL12E
Super Capacitors Vol.12 13
Dimensions
5.5V 473
A1
E
+
–
Nominal capacitance
E ：FME type marking
L ：FML type marking
R ：FMR type marking
Negative polarity identification
Date code
Polarity
MAX operating
voltage
11.5±0.5
5±10.4±0.1
0.5±0.1 0.4±0.1
10.5±0.5
5±0.5
T±0.5
N T
（Unit：mm）
6.2 FM Series
Ｌ＝2.2 to 5mm
Lead length designation For transverse mounting ＜L1＞
Lead terminal forming example
Markings
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2010.11.8 9565SCAVOL12E
14 Super Capacitors Vol.12
Specifi cations
󱾀5.5V Type
Part Number MAX
operating
voltage
（Vdc）
Nominal
capacitance MAX ESR
（at 1 kHz）
（Ω）
MAX current
at 30 min.
（mA）
Voltage
holding
characteristics
（V）
T
（mm）
Weight
（g）
Bulk Ammo pack
Charge
system(F)
Discharge
system(F)
FM0H103ZF FM0H103ZFTP（ ）5.5 0.01 0.014 300 0.015 4.2 5.0 1.3
FM0H223ZF FM0H223ZFTP（ ）5.5 0.022 0.028 200 0.033 4.2 5.0 1.3
FM0H473ZF FM0H473ZFTP（ ）5.5 0.047 0.06 200 0.071 4.2 5.0 1.3
FM0H104ZF FM0H104ZFTP（ ）5.5 0.10 0.13 100 0.15 4.2 6.5 1.6
FM0H224ZF FM0H224ZFTP（ ）5.5 −0.22 100 0.33 4.2 6.5 1.6
To complete the part number, insert lead length (16mm or 18mm) in to the "( )"
󱾀3.5V Type
Part Number MAX operating
voltage
（Vdc）
Nominal
capacitance MAX ESR
（at 1 kHz）
（Ω）
MAX current at
30 min.
（mA）
T
（mm）
Weight
（g）
Bulk Ammo pack
Charge
system(F)
Discharge
system(F)
FM0V473ZF FM0V473ZFTP（ ）3.5 0.047 0.06 200 0.042 5.0 1.3
FM0V104ZF FM0V104ZFTP（ ）3.5 0.10 0.13 100 0.090 5.0 1.3
FM0V224ZF FM0V224ZFTP（ ）3.5 0.22 0.30 100 0.20 6.5 1.6
To complete the part number, insert lead length (16mm or 18mm) in to the "( )"
󱾀6.5V Type
Part Number MAX operating
voltage
（Vdc）
Nominal
capacitance MAX ESR
（at 1 kHz）
（Ω）
MAX current at
30 min.
（mA）
T
（mm）
Weight
（g）
Bulk Ammo pack
Charge
system(F)
Discharge
system(F)
FM0J473ZF FM0J473ZFTP（ ）6.5 0.047 0.062 200 0.071 6.5 1.6
To complete the part number, insert lead length (16mm or 18mm) in to the "( )"
󱾀FME, FML Type (Buckup Large Current, mA Order)
Part Number MAX operating
voltage
（Vdc）
Nominal
capacitance MAX ESR
（at 1 kHz）
（Ω）
MAX current at
30 min.
（mA）
T
（mm）
Weight
（g）
Bulk Ammo pack
Charge
system(F)
Discharge
system(F)
FME0H223ZF FME0H223ZFTP（ ）5.5 0.022 0.028 40 0.033 5.0 1.3
FME0H473ZF FME0H473ZFTP（ ）5.5 0.047 0.06 20 0.071 5.0 1.3
FML0H333ZF FML0H333ZFTP（ ）5.5 0.033 6.5 0.050 5.0 1.3
To complete the part number, insert lead length (16mm or 18mm) in to the "( )"
󱾀FMR Type (MAX Operating Temperature 85 ℃ Type)
Part Number MAX
operating
voltage
（Vdc）
Nominal
capacitance MAX ESR
（at 1 kHz）
（Ω）
MAX current
at 30 min.
（mA）
Voltage
holding
characteristics
（V）
T
（mm）
Weight
（g）
Bulk Ammo pack
Charge
system(F)
Discharge
system(F)
FMR0H473ZF FMR0H473ZFTP（ ）5.5 0.047 0.062 200 0.071 4.2 6.5 1.6
FMR0H104ZF FMR0H104ZFTP（ ）5.5 0.10 50 0.15 4.2 6.5 1.6
FMR0V104ZF FMR0V104ZFTP（ ）3.5 0.10 50 0.090 −6.5 1.6
To complete the part number, insert lead length (16mm or 18mm) in to the "( )"
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2010.11.8 9565SCAVOL12E
Super Capacitors Vol.12 15
󱾀FMC Type
Chip parts applicable to treatment in bond hardening furnace (160±5℃ for 120±10 seonds)
5.5V 473
K1
C
+
–
Nominal capacitance
C：FMC type marking
Negative polarity identification
Date code
Polarity
MAX operating
voltage
a ±0.5
5±10.4±0.1
d
1
±0.1 d
2
±0.1
b ±0.5
5±0.5
T±0.5
N T
（Unit：mm）
Dimensions
Markings
Specifi cations
Part Number MAX
operating
voltage
（Vdc）
Nominal
capacitance MAX ESR
（at 1 kHz）
（Ω）
MAX
current at
30 min.
（mA）
Voltage
holding
characteristics
（V）
a
(mm)
b
(mm)
T
(mm)
d1
(mm)
d2
(mm)
Weight
（g）
Bulk Ammo pack
Charge
system(F)
Discharge
system(F)
FMC0H473ZF FMC0H473ZFTP（ ）5.5 0.047 0.06 100 0.071 4.2 11.5 10.5 5.0 0.5 0.4 1.3
FMC0H104ZF FMC0H104ZFTP（ ）5.5 0.10 0.13 50 0.15 4.2 11.5 10.5 6.5 0.5 0.4 1.6
FMC0H334ZF FMC0H334ZFTP（ ）5.5 – 0.33 25 0.50 4.2 15.0 14.0 9.0 0.6 0.6 3.5
To complete the part number, insert lead length (16mm or 18mm) in to the "( )"
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2010.11.8 9565SCAVOL12E
16 Super Capacitors Vol.12
Taping Specifi cation [except FMC0H334ZFTP( )]
P2
a
L
W2W0
W1
W
P1
P0D0
W4t3
t1
t2
FH
c
h
b
P
Δ
−＋ −＋
（Unit：mm）
Item Symbol Value Tolerance Remarks
Component Height a 11.5 ±0.5
Component Width b 10.5 ±0.5
Component Thickness c −±0.5
5.5 V type : 5.0/0.010F to 0.047F, 6.5/0.047F
3.5 V type : 5.0/0.047F to 0.10F, 6.5/0.22F
FME type : 5.0/0.022F to 0.047F
FML type : 5.0/0.033F
6.5 V type : 6.5/0.047F, 0.10F
FMR type : 6.5/0.047F
FMC type : 5.0/0.047F, 6.5/0.10F
Lead-wire Width W40.5 ±0.1
Lead-wire Thickness t30.4 ±0.1
Pitch between Component P 12.7 ±1.0
Sprocket Hole Pitch P012.7 ±0.3
Sprocket Hole to Lead P13.85 ±0.7
〃P26.35 ±1.3
Lead Spacing F 5.0 ±0.5
Component Alignment
Δ
h 2.0 Max. −Including tilting caused by bending lead wire.
Tape Width W 18.0 ＋1.0
−0.5
Hold-down tape Width W012.5 Min. −
Sprocket Hole Position W19.0 ±0.5
Hold-down Tape Position W23.0 Max. −No protrusion of tape.
Component's Bottom Line Position H16.0 ±0.5
〃18.0 ±0.5
Sprocket Hole Diameter D0φ4.0 ±0.2
Total tape Thickness t10.7 ±0.2
〃t21.5 Max. −
Defect Component Cut-off Position L 11.0 Max. −
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2010.11.8 9565SCAVOL12E
Super Capacitors Vol.12 17
Taping Specifi cation [except FMC0H334ZFTP ( )]
P2
L
W2W0
W1
W
P0D0
W4t3
t1
t2
H
c
b
P
−＋−＋
P1F
a
h
Δ
（Unit：mm）
Item Symbol Value Tolerance Remarks
Component Height a 15.0 ±0.5
Component Width b 14.0 ±0.5
Component Thickness c 9.0 ±0.5
Lead-wire Width W40.6 ±0.1
Lead-wire Thickness t30.6 ±0.1
Pitch between Component P 25.4 ±1.0
Sprocket Hole Pitch P012.7 ±0.3
Sprocket Hole to Lead P13.85 ±0.7
〃P26.35 ±1.3
Lead Spacing F 5.0 ±0.5
Component Alignment
Δ
h 2.0 Max. −Including tilting caused by bending lead wire
Tape Width W 18.0 ＋1.0
−0.5
Hold-down tape Width W012.5 Min. −
Sprocket Hole Position W19.0 ±0.5
Hold-down Tape Position W23.0 Max. −No protrusion of tape
Component's Bottom Line Position H16.0 ±0.5
〃18.0 ±0.5
Sprocket Hole Diameter D0φ4.0 ±0.2
Total tape Thickness t10.67 ±0.2
〃t21.7 Max. −
Defect Component Cut-off Position L 11.0 Max. −
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2010.11.8 9565SCAVOL12E
18 Super Capacitors Vol.12
Specifi cations
Series name
Item
5.5V type, 3.5V type, 6.5V type
FMC type FML, FME type Test conditions
(conforming to JIS C 5160-1)
Category temperature range −25 ℃ to ＋70 ℃−25 ℃ to ＋70 ℃
MAX operating voltage 5.5Vdc, 3.5Vdc, 6.5Vdc 5.5Vdc
Capacitance
5.5V：0.010F to 0.33F
3.5V：0.047F to 0.22F
6.5V：0.047
0.022F, 0.033F, 0.047F Refer to “Measurement Conditions”
Capacitance allowance ＋80 ％, −20 ％＋80 ％, −20 ％Refer to “Measurement Conditions”
ESR Refer to standard ratings Refer to standard ratings Measured at 1kHz, 10mA ; See also
“Measurement Conditions”
Current (30-minutes value) Refer to standard ratings Refer to standard ratings Refer to “Measurement Conditions”
Surge
Capacitance More than 90% of initial ratings More than 90% of initial ratings Surge voltage ：4.0V (3.5V type)
：6.3V (5.5V type)
：7.4V (6.5V type)
Charge：30 sec.
Discharge：9min 30sec.
Number of cycles ：1000
Series resistance ：0.010F 1500Ω
：0.022F 560Ω
：0.033F 510Ω
： 0.047F 300Ω
：0.068F 240Ω
：0.10F 150Ω
：0.22F 56Ω
：0.33F 51Ω
Discharge resistance：0Ω
Temperature：70±2℃
ESR
Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings
Current (30 minutes value)
Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings
Appearance No obvious abnormality No obvious abnormality
Characteristics
in different
temperature
Capacitance Phase
2
50% or higher than initial value
Phase
2
50% or higher than initial value
Conforms to 4.17
Phase1：＋25±2℃
Phase2：−25±2℃
Phase4：＋25±2℃
Phase5：＋70±2℃
Phase6：＋25±2℃
ESR
400% or less than initial value 400% or less than initial value
Capacitance Phase
3
Phase
3
ESR
Capacitance Phase
5
200% or less than initial value
Phase
5
200% or less than initial value
ESR Satisfy initial ratings Satisfy initial ratings
Current (30 minutes value)
1.5CV (mA) or below 1.5CV (mA) or below
Capacitance Phase
6
Within ±20% of initial value
Phase
6
Within ±20% of initial value
ESR Satisfy initial ratings Satisfy initial ratings
Current (30 minutes value)
Satisfy initial ratings Satisfy initial ratings
Lead strength (tensile) No terminal damage No terminal damage Conforms to 4.9
Vibration
resistance
Capacitance
Satisfy initial ratings Satisfy initial ratings Conforms to 4.13
Frequency：10 to 55 Hz
Testing time：6 hours
ESR
Current (30 minutes value)
Appearance No obvious abnormality No obvious abnormality
Solderability Over 3/4 of the terminal should
be covered by the new solder
Over 3/4 of the terminal should
be covered by the new solder
Conforms to 4.11
Solder temp：245±5℃
Dipping time：5±0.5 sec.
1.6mm from the bottom should be dipped.
Solder heat
resistance
Capacitance
Satisfy initial ratings Satisfy initial ratings Conforms to 4.10
Solder temp：260±10 ℃
Dipping time：10±1 sec.
1.6mm from the bottom should be dipped.
ESR
Current (30 minutes value)
Appearance No obvious abnormality No obvious abnormality
Temperature
cycle
Capacitance
Satisfy initial ratings Satisfy initial ratings Conforms to 4.12
Temperature condition：−25 ℃→Room temperature→
＋70 ℃→Room temperature
Number of cycles：5 Cycles
ESR
Current (30 minutes value)
Appearance No obvious abnormality No obvious abnormality
High temp. and
high humidity
resistance
Capacitance Within ±20% of initial value Within ±20% of initial value Conforms to 4.14
Temperature：40±2℃
Relative humidity：90 to 95 ％RH
Testing time：240±8 hours
ESR
Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings
Current (30 minutes value)
Not to exceed 120% of initial ratings Not to exceed 120% of initial ratings
Appearance No obvious abnormality No obvious abnormality
High
temperature
load
Capacitance Within ±30% of initial value Within ±30% of initial value Conforms to 4.15
Temperature：70±2℃
Voltage applied：MAX operating voltage
Series protection resistance：0Ω
Testing time：1000＋48
 0Hours
ESR Below 200% of initial ratings Below 200% of initial ratings
Current (30 minutes value)
Below 200% of initial ratings Below 200% of initial ratings
Appearance No obvious abnormality No obvious abnormality
Self discharge characteristics
(voltage holding characteristics)
5.5V type: Voltage between
terminal leads higher
than 4.2V
3.5V type: Not specifi ed
6.5V type: Not specifi ed
Charging
condition
Voltage applied：5.0Vdc (Terminal at
the case's side be negative)
Series resistance：0Ω
Charging time：24 hours
Storage
Let stand for 24 hours in condition
described below with terminals opened.
Ambient temperature：Lower than 25℃
Relative humidity：Lower than 70%RH
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2010.11.8 9565SCAVOL12E
Super Capacitors Vol.12 19
Specifi cations
Series name
Item FMR type Test conditions (conforming to JIS C 5160-1)
Category temperature range −40 ℃ to ＋85 ℃
MAX operating voltage 5.5Vdc, 3.5Vdc
Capacitance 0.047F, 0.10F Refer to “Measurement Conditions”
Capacitance allowance ＋80 ％, −20 ％Refer to “Measurement Conditions”
ESR Refer to standard ratings Measured at 1kHz, 10mA ; See also “Measurement
Conditions”
Current (30-minutes value) Refer to standard ratings Refer to “Measurement Conditions”
Surge
Capacitance More than 90% of initial ratings Surge voltage ：4.0V (3.5V type)
：6.3V (5.5V type)
Charge：30 sec.
Discharge：9min 30sec.
Number of cycles：1000
Series resistance ：0.047F 300Ω
：0.10F 150Ω
Discharge resistance：0Ω
Temperature：85±2℃
ESR Not to exceed 120% of initial ratings
Current (30 minutes value) Not to exceed 120% of initial ratings
Appearance No obvious abnormality
Characteristics in
different temperature
Capacitance Phase 2 50% or higher than initial value
Conforms to 4.17
Phase1：＋25±2℃
Phase2：−25±2℃
Phase3：−40±2℃
Phase4：＋25±2℃
Phase5：＋70±2℃
Phase6：＋25±2℃
ESR 400% or less than initial value
Capacitance Phase 3 30% or higher than initial value
ESR Below 700% of the initial value
Capacitance
Phase 5
200% or less than initial value
ESR Satisfy initial ratings
Current (30 minutes value) 1.5CV (mA) or below
Capacitance
Phase 6
Within ±20% of initial value
ESR Satisfy initial ratings
Current (30 minutes value) Satisfy initial ratings
Lead strength (tensile) No terminal damage Conforms to 4.9
Vibration resistance
Capacitance
Satisfy initial ratings Conforms to 4.13
Frequency：10 to 55 Hz
Testing time：6 hours
ESR
Current (30 minutes value)
Appearance No obvious abnormality
Solderability Over 3/4 of the terminal should be covered by
the new solder
Conforms to 4.11
Solder temp：245±5℃
Dipping time：5±0.5 sec.
1.6mm from the bottom should be dipped.
Solder heat resistance
Capacitance
Satisfy initial ratings Conforms to 4.10
Solder temp：260±10 ℃
Dipping time：10±1 sec.
1.6mm from the bottom should be dipped.
ESR
Current (30 minutes value)
Appearance No obvious abnormality
Temperature cycle
Capacitance
Satisfy initial ratings
Conforms to 4.12
Temperature condition：−40 ℃→Room temperature→
＋85 ℃→Room temperature
Number of cycles：5 Cycles
ESR
Current (30 minutes value)
Appearance No obvious abnormality
High temp. and high
humidity resistance
Capacitance Within ±20% of initial value Conforms to 4.14
Temperature：40±2℃
Relative humidity：90 to 95 ％RH
Testing time：240±8 hours
ESR Not to exceed 120% of initial ratings
Current (30 minutes value) Not to exceed 120% of initial ratings
Appearance No obvious abnormality
High temperature load
Capacitance Within ±30% of initial value Conforms to 4.15
Temperature：85±2℃
Voltage applied：MAX operating voltage
Series protection resistance：0Ω
Testing time：1000＋48
 0Hours
ESR Below 200% of initial ratings
Current (30 minutes value) Below 200% of initial ratings
Appearance No obvious abnormality
Self discharge characteristics
(voltage holding characteristics)
5.5V type: Voltage between terminal leads
higher than 4.2V
3.5V type: Not specifi ed
Charging
condition
Voltage applied：5.0Vdc (Terminal
at the case's side be negative)
Series resistance：0Ω
Charging time：24 hours
Storage
Let stand for 24 hours in condition
described below with terminals
opened.
Ambient temperature：Lower than 25 ℃
Relative humidity：Lower than 70%RH