PD-2.277 rev. A 12/97 162CMQ030 SCHOTTKY RECTIFIER 160 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular Description/Features 162CMQ030 Units 160 A 30 V IFSM @ tp = 5 s sine 7900 A VF 0.46 V - 55 to 150 C waveform VRRM @ 80 Apk, TJ = 125C (per leg) TJ range The 162CMQ030 isolated, center tap Schottky rectifier module has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150 C TJ operation Isolated heatsink Center tap module High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Low profile, high current package CASE STYLE AND DIMENSIONS Conforms to JEDEC Outline TO - 249AA Dimensions in millimeters and inches www.irf.com 1 162CMQ030 Series PD-2.277 rev. A 12/97 Voltage Ratings Part number VR 162CMQ030 Max. DC Reverse Voltage (V) 30 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 162CMQ Units IF(AV) Max. Average Forward Current 160 A Conditions 50% duty cycle @ TC = 83 C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 7900 A Surge Current (Per Leg) * See Fig. 7 980 EAS Non-Repetitive Avalanche Energy (Per Leg) 72 mJ IAR Repetitive Avalanche Current (Per Leg) 16 A 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with TJ = 25 C, IAS = 16 Amps, L = 0.56 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM IRM 162CMQ Units Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) Conditions 0.53 0.65 0.46 V V V @ 80A @ 160A @ 80A 0.63 V @ 160A TJ = 25 C TJ = 125 C 5 mA TJ = 25 C 280 mA TJ = 125 C VR = rated VR CT Max. Junction Capacitance (Per Leg) 3700 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25C LS Typical Series Inductance (Per Leg) 8.0 nH Measured from terminal hole to terminal hole 10,000 V/ s dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications Parameters 162CMQ Units TJ Max. Junction Temperature Range -55 to 150 C Tstg Max. Storage Temperature Range -55 to 150 C Conditions RthJC Max. Thermal Resistance Junction to Case (Per Leg) 1.0 C/W DC operation RthJC Max. Thermal Resistance Junction to Case (Per Package) 0.50 C/W DC operation RthCS Typical Thermal Resistance, Case to Heatsink 0.10 C/W Mounting surface , smooth and greased wt Approximate Weight T Mounting Torque Case Style 2 58 (2.0) g (oz.) Min. 40 (35) Max. 58 (50) Kg-cm (Ibf-in) TO - 249AA * See Fig. 4 JEDEC www.irf.com T =150C J T =125C J T = 25C J .1 .2 .3 .4 .5 .6 .7 .8 .9 D=0.50 D=0.33 D=0.25 D=0.17 D=0.08 1 1.1 1.2 Single Pulse (Thermal Resistance) .001 .1 1000 100 10 1 .1 .01 0 20 25 30 PD-2.277 rev. A 12/97 162CMQ030 Series 125C T =150C J 15 ReverseVoltage - VR(V) 10 25C 50C 75C 100C 5 5 10 20 T =25C J 15 25 30 35 Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 10000 1000 0 ReverseVoltage- VR(V) 100 3 Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) P DM t 1 t2 Notes: 1. Dutyfactor D= t / t 1 2 10 2. Peak T =P xZ +T J DM thJC C 1 t1, Rectangular PulseDuration(Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) .0001 ReverseCurrent - I (mA) R JunctionCapacitance- C (pF) T 1000 100 10 1 0 ForwardVoltage Drop- V (V) FM 10 1 .1 .01 .001 .00001 .01 Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Thermal Impedance- ZthJC(C/W) www.irf.com InstantaneousForwardCurrent - I (A) F 20 40 DC 60 80 100 162CMQ030 RthJC (DC) =1.0C/W 162CMQ030 Series 160 140 120 100 80 0 AverageForwardCurrent - IF(AV) (A) (A) Non-Repetitive Surge Current - I FSM 10000 1000 120 L 100 IRFP460 1000 20 RMSLimit 60 D=0.08 D=0.17 50 D=0.25 D=0.33 D=0.50 40 30 20 10 0 0 40 60 DC 80 100 AverageForwardCurrent - I (A) F(AV) + 120 www.irf.com Vd = 25 Volt Fig. 6 - Forward Power Loss Characteristics (Per Leg) 10000 FREE-WHEEL DIODE 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit Rg = 25 ohm HIGH-SPEED SWITCH Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) Square Wave Pulse Duration - tp (microsec) 100 10 At Any Rated Load Condition And With Rated VRRM Applied Following Surge Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) DUT CURRENT MONITOR Average Power Loss - (Watts) PD-2.277 rev. A 12/97 4 Allowable CaseTemperature- (C)