DESIGN NOTES (Continued) Marking consists of manufacturer's name, logo (EC), part number, terminal identification and date code of manufacture, All marking is applied by silk screen process using white epoxy paint in accordance with MIL-STD-130, to meet the permanency of identification required by MIL-STD-202, Method 2175. BLOCK DIAGRAM IS SHOWN BELOW Input Vec Vec NC 16 13 42 9 r cme ce ee | | | | | INPUT LQ DELAY LINE WITH | | DRIVER [> ACT PICKOFF | | | ct ace ce creel ree oo o o 2 3 4 5 6 7 B Tap 1 Tap2 Grd Grd Tap 3 Tap 4 Output MECHANICAL DETAIL IS SHOWN BELOW - 200 ~| | IN vv NC 4oo | @ LDM-ACT-__ _ | 1 2 C 3 40UT j qT ao | See 8027 MADE IN SLO USA ay 30 | | f 165 +,020 .060 lt TYP. 7 O50 TYP. |_ bozo DIA. TYP. .100 TYP. .150 TYP. 300 1 350 TYP. + TEST CONDITIONS 1. All measurements are made at 25C, 2. Vec supply voltage is maintained at 5.0V DC. 3. All units are tested using an ACT toggle-type positive input pulse and one ACT load at the output being tested. @4. Input pulse width used is G00ns. Pulse period is 5000ns. OPERATING SPECIFICATIONS . 4.75 to .25V DC Vee supply currant: Constant VW orO" in... 2. ee na Fypical Constant 1 Mhz square wave... . pical Lagic 1 input: Voltage . 2. see wae wee ee 2V min. Veg max, Lagic 0 input: MMIC ig ecw haw ek +. O.BV max, Logic 1 Voltage out: 2. ee ee ee 4,.3V min. (@ 24ma Logic O Voltage out: 1. ee ae . 0.44 max, @ +24ma Operating temperature range:. .... + - -40 ta +85C, --55 to+ 125C. *Delays increase or decrease approximately 2% for an increase or decrease of 5% in supply voltage. PART NUMBER TABLE # DELAYS AND TOLERANCES (in ns) Part Number] Tap 1 | Tap 2 | Tap 3 | Tap 4 | Output LDM-ACT-10 6+1.0 7+1.0] 841.0) 921.0) 1041.0 LDOM-ACT-14 6+1.0 841.0) 1041.0] 1241.0) 1441.0 LDM-ACT-18 6+1.0 841.0) 1241.0) 1541.0) 18+1.0 LDM-ACT-22 641.0] 1021.0) 14+1.0) 18+1.0) 22+1.0 LDM-ACT-26 621.0) 1141.0) 1641.0) 2141.0] 26+1.0 LDM-ACT-30 641.0) 1241.0) 18+1.0) 2441.0] 241.0 LDM-ACT-35 71.0] 1421.0) 21+1.0) 28+1.5] 35+1.5 LOM-ACT-40 B+1.0) 1621.0) 2441.5) 3221.5) 4021.5 LDM-ACT-45 941.0] 1821.0) 27+1.5] 36+1.5] 45+20 LDM-ACT-50 1041.0) 2021.0) 3041.5) 4042.0) 50220 LDM-ACT-55 1141.0] 2221.0) 33+1.5) 4422.0) 65+2.0 LDM-ACT-60 1241.0) 2441.0) 3621.5) 48420) 60220 LDOM-ACT-65 1341.0] 2641.5] 3941.5) 6222.0) 6642.6 LOM-ACT-70 1421.0) 2641.5) 4242.0) 5642.0) 70425 LDOM-ACT-75 15+10] 30415] 4842.0) 6042.5) 7642.5 LDM-ACT-80 1641.0) 3241.5) 4842.0) 64425) 8023.0 LDOM-ACT-85 17#10| 34215] 5142.0) 6642.5) 86+3.0 LDM-ACT-30 1841.0] 3641.5) 5442.0) 72425) 90+3.0 LDM-ACT-95 19410] 3841.6) 6722.0) 76225) 9643.0 LDOM-ACT-100 | 2041.0] 4021.5] 6042.0) 8043.0/10023.0 LOM-ACT-128 | 2541.0) 8042.0) 7642.5/10043.0/12524.0 LOM-ACT-150 | 3041.5) 60+2.0) 90+3.0/120+4.0/150+5.0 LOM-ACT-175 | 3521.5) 7022.5/10524.0/14045.0/175 25.0 LOM-ACT-200 | 4041.5| 8022.5/120 +4.0/16045.0/200+6.0 LOM-ACT-225 | 45+2.0] 902+3.0/135 24.0/18046.0/22527.0 LOM-ACT-250 | 50+2.0 | 100+ 3.0/150 +4.5|200 +6.0/250 +8.0 @All modules can be operated with a minumum input pulse width of 40% of full delay and pulse period approaching square wave; since delay accuracies may be somewhat degraded, it is sug- gested that the module be evaulated under the specific operating conditions. Special modules can be readily manufactured to improve accuracies and/or provide customer specified random delay times for specific applications. Catalog No. C/O63089