NPPA-TT-S
2 x 48 TT (Bantam) jacks, half normalled bottom row, 288 solder
terminals, individual grounding
All NPPA patch panels are fitted with high quality, long life
NJ3TTA gold plated double contact jacks (2x48), featuring best
contact integrity. The unit, robustly housed in a black coated
steel shell, is finished off with a built in cable bar and two large
channel identification strips for perfect management of the
system. The NPPA patch panels are an innovative and compact
patching system (just 1U high) for 19" rack mounting.
Features & Benefits
Innovative and compact patching system (just 1U high)
for 19" rack mounting
•Robustly housed in a black coated steel shell
•
High quality long life gold plated Neutrik prewired
double jacks with best contact integrity
•Qualified for analog and digital signals acc. AES3, 48
kHz sampling frequency
•
Mixed normalling configuration can be done by jack
pairs (see accessories)
•Flexible grounding system (see Assembly Instruction)
•
NPPA-TT-S 1/2
Technical Information
Product
Title NPPA-TT-S
Connection Type Patch Panel
Electrical
Signal Type Digital suitability acc. AES/EBU (3.072 Mb/s and 6.144 Mb/s)
Contact resistance 20 mΩ
Contact resistance < 25 mΩ
Dielectric strength 1 kVdc
Frequencyrange DC to > 50 MHz
Insulation resistance > 1 GΩ
Channel separation > 100 dB @ 10 kHz, 600 terminated
> 40 dB @ 6 MHz, 110 terminated
Mechanical
Insertion force < 10 N
Withdrawal force > 8 N
Lifetime > 5000 mating cycles
Wiresize
Locking device Retention spring
Material
Contact plating TRIBOR® (0.2 µm AuCo over 2 µm NiP) (Jacks)
Contacts Bronze (CuSn6) (Jacks)
Shell PA 66 blend (Jacks)
Shell plating Black
Environmental
Temperature range -30 °C to +80 °C
NPPA-TT-S 2/2
