MCT 0603 AT - Professional
Vishay Beyschlag
Professional Automotive Thin Film Chip Resistor
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 28760
1Revision: 07-May-08
MCT 0603 AT Professional Thin Film Chip Resistors are the
perfect choice for most fields of modern professional
electronics where reliability and stability is of major concern.
Typical applications include automotive, telecommunication,
industrial, medical equipment, precision test and measuring
equipment.
FEATURES
Operating temperature 175 °C, 1000 h
Superior moisture resistivity < 0.5 % (85 °C;
85 % RH; 1000 h)
Rated dissipation P85 = 150 mW
AEC-Q200 compliant
Green product, supports lead (Pb)-free soldering, RoHS
compliant
APPLICATIONS
Automotive
Telecommunication
Medical equipment
Industrial equipment
Notes
(1) Please refer to APPLICATION INFORMATION below
(2) Measuring conditions in accordance with EN 140401-801
METRIC SIZE
INCH: 0603
METRIC: RR1608M
RoHS
COMPLIANT
TECHNICAL SPECIFICATIONS
DESCRIPTION MCT 0603 AT
Metric size RR1608M
Resistance range 100 Ωto 100 kΩ
Resistance tolerance ± 1 %; ± 0.5 %
Temperature coefficient ± 50 ppm/K; ± 25 ppm/K
Rated dissipation P85 (1) 0.150 W
Operating voltage, Umax. AC/DC 75 V
Permissible film temperature (1) 175 °C
Thermal resistance (2) 550 K/W
Insulation voltage
1 min; Uins 100 V
continuous 75 V
Observed failure rate FITobserved 0.1 x 10- 9/h
MCT 0603 AT - Professional
Professional Automotive Thin Film Chip Resistor Vishay Beyschlag
Document Number: 28760 For technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com
Revision: 07-May-08 2
APPLICATION INFORMATION
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support
of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not
exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime. At the maximum permissible film temperature of 175 °C the useful lifetime is specified for 1000 h. The
designer may estimate the performance of the particular resistor application or set certain load and temperature limits in order to
maintain a desired stability.
Notes
(1) Products can be ordered using either the PART NUMBER and PRODUCT DESCRIPTION
(2) Please refer to table PACKAGING below
MAXIMUM RESISTANCE CHANGE AT RATED POWER
DESCRIPTION MCT 0603 AT
Metric size RR1608M
Operation mode Standard Power Advanced Temperature
Rated power P70 = 0.1 W P70 = 0.125 W P85 = 0.15 W
Film temperature 125 °C 155 °C 175 °C
Max. resistance change at P70 for resistance range: 100 Ω to 100 kΩ
ΔR/R max., after: 1000 h 0.15 % 0.25 %
8000 h 0.25 % 0.5 %
225 000 h 1.0 % -
Max. resistance change at P85 for resistance range: 100 Ω to 100 kΩ
ΔR/R max., after: 1000 h 0.5 %
PART NUMBER AND PRODUCT DESCRIPTION (1)
PART NUMBER: MCT0603MD4641DPW00
MODEL/SIZE SPECIAL
CHARACTER TCR VALUE TOLERANCE PACKAGING (2) SPECIAL
MCT0603 M = AT
(Automotive)
D
= ± 25 ppm/K
C
= ± 50 ppm/K
Z
= Jumper
3 digit value
1 digit
multiplier
MULTIPLIER
0 = *100
1 = *101
2 = *102
3 = *103
4 = *104
0000 = Jumper
D = ± 0.5 %
F = ± 1 %
Z = Jumper
P5
PW
up to 2 digits
00 = standard
PRODUCT DESCRIPTION: MCT 0603 - 25 0.5 % AT PW 4K64
MCT 0603 - 25 0.5 % AT PW 4K64
MODEL SIZE TCR TOLERANCE
VALUE
SPECIAL
CHARACTER PAC KAG I NG (2) RESISTANCE
VALUE
MCT 0603 ± 25 ppm/K
± 50 ppm/K
± 0.5 %
± 1 %
AT = Automotive P5
PW
47K = 47 kΩ
0R0 = Jumper
CT0603MD4M41DPW006
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 28760
3Revision: 07-May-08
MCT 0603 AT - Professional
Vishay Beyschlag Professional Automotive Thin Film Chip Resistor
DIMENSIONS
Note
(1) Resistance values to be selected for ± 1 % tolerance from E24 and E96; for ± 0.5 % tolerance from E24 and E192
Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability.
DIMENSIONS - chip resistor types, mass and relevant physical dimensions
TYPE H
(mm)
L
(mm)
W
(mm)
WT
(mm)
T1
(mm)
T2
(mm)
MASS
(mg)
MCT 0603 AT
0.45 + 0.1/- 0.05
1.55 ± 0.05 0.85 ± 0.1 > 75 % of W
0.3 + 0.15/- 0.2 0.3 + 0.15/- 0.2
1.9
T2
T1
L
H
WWT
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
DESCRIPTION RESISTANCE VALUE (1)
TCR TOLERANCE MCT 0603 AT
± 50 ppm/K
± 1 % 100 Ωto 100 kΩ
± 0.5 % 100 Ωto 100 kΩ
± 25 ppm/K ± 0.5 % 100 Ωto 100 kΩ
Jumper - 20 mΩ; Imax. = 1 A
PACKAGING
MODEL
REEL
PIECES/
PAPER TAPE ON REEL CODE
MCT 0603 AT
5000 P5
20 000 PW
MCT 0603 AT - Professional
Professional Automotive Thin Film Chip Resistor Vishay Beyschlag
Document Number: 28760 For technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com
Revision: 07-May-08 4
DESCRIPTION
Production is strictly controlled and follows an extensive set
of instructions established for reproducibility. A
homogeneous film of metal alloy is deposited on a high grade
(96 % Al2O3) ceramic substrate and conditioned to achieve
the desired temperature coefficient. Specially designed inner
contacts are deposited on both sides. A special laser is used
to achieve the target value by smoothly cutting a meander
groove in the resistive layer without damaging the ceramics.
The resistor elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure tin on nickel plating.
The result of the determined production is verified by an
extensive testing procedure and optical inspection
performed on 100 % of the individual chip resistors. Only
accepted products are laid directly into the paper tape in
accordance with EN 60286-3.
ASSEMBLY
The resistors are suitable for processing on automatic SMD
assembly systems. They are suitable for automatic soldering
using wave, reflow or vapour phase as shown in
IEC 61760-1*. The encapsulation is resistant to all cleaning
solvents commonly used in the electronics industry,
including alcohols, esters and aqueous solutions. The
suitability of conformal coatings, if applied, shall be qualified
by appropriate means to ensure the long-term stability of the
whole system. The resistors are RoHS compliant; the pure
tin plating provides compatibility with lead (Pb)-free and
lead-containing soldering processes. Solderability is
specified for 2 years after production or requalification. The
permitted storage time is 20 years. The immunity of the
plating against tin whisker growth has been proven under
extensive testing.
All products comply with the GADSL (1) and the
CEFIC-EECA-EICTA (2) list of legal restrictions on
hazardous substances. This includes full compliance with
the following directives:
2000/53/EC End of Vehicle life Directive (ELV) and
Annex II (ELV II)
2002/95/EC Restriction of the use of Hazardous
Substances directive (RoHS)
2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
APPROVALS
The resistors are tested in accordance with EN 140401-801
(superseding CECC 40401-801) which refers to EN 60115-1
and EN 140400. The approval is valid with regards to rated
power P70 and a temperature range of - 55 °C to 155 °C.
Approval of conformity is indicated by the CECC logo on the
package label.
Vishay BEYSCHLAG has achieved “Approval of
Manufacturer“ in accordance with EN 100114-1. The
release certificate for “Technology Approval Schedule“ in
accordance with CECC 240 001 based on EN 100114-6 is
granted for the Vishay BEYSCHLAG manufacturing process.
SPECIALS
This product family of thin film flat chip resistors is completed
by Zero Ohm Jumpers.
Notes
The quoted IEC standards marked with an asterisk (*) are also released as EN standards with the same number and identical contents
(1) Global Automotive Declarable Substance List, see www.gadsl.org
(2) CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see www.eicta.org issue
environment policy chemicals chemicals for electronics
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 28760
5Revision: 07-May-08
MCT 0603 AT - Professional
Vishay Beyschlag Professional Automotive Thin Film Chip Resistor
FUNCTIONAL PERFORMANCE
0.1
0.2
W
Power Dissipation
P
°C
100 150- 50 0 50 70
ϑ
Ambient Temperature
amb
85175
Standard
Power
Advanced Temperature
Derating
For permissible resistance change please refer to table MAXIMUM RESISTANCE CHANGE AT RATED POWER
1
W
100
10
Pulse Load
max.
100 µ s1 ms 10 ms 1 s 10 s 10 µ s 100 ms
Pulse Duration
i
0. 1
MCT 0603 AT
t
P
Maximum pulse load, single pulse; for permissible resistance change equivalent to 8000 h operation
Single Pulse
1
W
10
100
100 µ s1 ms 10 ms 1 s 10 s
10 µ s 100 ms
0.1
MCT 0603 AT
Continuous Pulse Load
max.
Pulse Duration
i
t
P
Maximum pulse load, continous pulses; for permissible resistance change equivalent to 8000 h operation
Continuous Pulse
MCT 0603 AT - Professional
Professional Automotive Thin Film Chip Resistor Vishay Beyschlag
Document Number: 28760 For technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com
Revision: 07-May-08 6
•2
1 kV
100 µ s1 ms 10 ms 1 s 10 s
10 µ s 100 ms
100 V
10 V
MCT 0603 AT
Pulse Voltage
max.
Pulse Duration
i
t
U
Maximum pulse voltage, single and continuous pulses; for permissible resistance change equivalent to 8000 h operation
Pulse Voltage
100 V
1 kV
10 V
10 kV
Resistance Value
R
Test Voltage
100 Ω1 kΩ10 kΩ100 kΩ1 MΩ
10 Ω10 MΩ
MCT 0603 AT
Pulse load rating in accordance with EN 60115-1 clause 4.27; 1.2 µs/50 µs; 5 pulses at 12 s interval;
for permissible resistance change 0.5 %
1.2/50 Pulse
100 V
1 kV
10 V
10 kV
100 Ω1 kΩ 10 kΩ100 kΩ 1 MΩ
10 Ω10 MΩ
MCT 0603 AT
Resistance Value
R
Test Voltage
Pulse load rating in accordance with EN 60115-1 clause 4.27; 10 µs/700 µs;
10 pulses at 1 minute intervals; for permissible resistance change 0.5 %
10/700 Pulse
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 28760
7Revision: 07-May-08
MCT 0603 AT - Professional
Vishay Beyschlag Professional Automotive Thin Film Chip Resistor
TESTS AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
EN 60115-1, Generic specification
EN 140 400, Sectional specification
EN 140 401-801, Detail specification
The components are approved in accordance with the
European CECC-system, where applicable. The following
table contains only the most important tests. For the full test
schedule refer to the documents listed above. The testing
also covers most of the requirements specified by
EIA/IS-703 and JIS-C-5202.
The tests are carried out in accordance with IEC 60068 and
under standard atmospheric conditions in accordance with
IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated
temperature range: Lower Category Temperature, Upper
Category Temperature; damp heat, long term, 56 days) is
valid (LCT = - 55 °C/UCT = 155 °C).
Unless otherwise specified the following values apply:
Temperature: 15 °C to 35 °C
Relative humidity: 45 % to 75 %
Air pressure: 86 kPa to 106 kPa (860 mbar to 1 060 mbar).
The components are mounted for testing on boards in
accordance with EN 60115-1, 4.31 unless otherwise
specified.
The requirements stated in the Test Procedures and
Requirements table are based on the required tests and
permitted limits of EN 140 401-801. However, some
additional tests and a number of improvements against those
minimum requirements have been included.
Current Noise
1
A
0.01
1 k
Ω
10 k
Ω
100 k
Ω
1 M
Ω
10 M
Ω
0. 1
1
µV/V
MCT 0603 AT
Resistance Value
R
Current noise A1 in accordance with IEC 60 195
Current Noise
•)
•)
0.1 0.3 1 GHz
20
0.5
1.0
1.5
2.0
IZI/R
Frequency
3
10
MCT 0603 AT
f
IZI/R for 49.9 Ω chip resistor
RF-Behaviour
MCT 0603 AT - Professional
Professional Automotive Thin Film Chip Resistor Vishay Beyschlag
Document Number: 28760 For technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com
Revision: 07-May-08 8
TEST PROCEDURES AND REQUIREMENTS
EN
60115-1
CLAUSE
IEC
60068-2
TEST
METHOD
TEST PROCEDURE
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR/R)
STABILITY CLASS 0.5
Stability for product types:
MCT 0603 AT 100 Ωto 100 kΩ
4.5 - Resistance ± 1 %; ± 0.5 %
4.8.4.2 - Temperature
coefficient
At 20/- 55/20 °C and
20/155/20 °C± 50 ppm/K; ± 25 ppm/K
4.25.1 -
Endurance at
70 °C: standard
operation mode
U= or
U = Umax.;
whichever is the less severe;
70 °C; 1000 h ± (0.15 % R +0.05Ω)
70 °C; 8000 h ± (0.25 % R +0.05Ω)
Endurance at
70 °C: power
operation mode
U= or
U = Umax.;
whichever is the less severe;
70 °C; 1000 h ± (0.3 % R +0.05Ω)
70 °C; 8000 h ± (0.5 % R +0.05Ω)
4.25.3 -
Endurance at
upper category
temperature
125 °C; 1000 h
155 °C; 1000 h
175 °C; 1000 h
± (0.15 % R + 0.05 Ω)
± (0.3 % R + 0.05 Ω)
± (0.5 % R + 0.05 Ω)
4.24 78 (Cab) Damp heat,
steady state
(40 ± 2) °C; 56 days;
(93 ± 3) % RH
U = 0.3 Urated
± (0.1 % R +0.05Ω)
4.39 67 (Cy)
Damp heat,
steady state,
accelerated
(85 ± 2) °C;
(85 ± 5) % RH
U= 0.3 Urated
1000 h
± (0.5 % R + 0.05 Ω)
4.23 Climatic sequence:
± (0.5 % R +0.05 Ω)
4.23.2 2 (Ba) dry heat 155 °C; 16 h
4.23.3 30 (Db) damp heat, cyclic 55 °C; 24 h; > 90 % RH;
1 cycle
4.23.4 1 (Aa) cold - 55 °C; 2 h
4.23.5 13 (M) low air pressure 8.5 kPa; 2 h; 25 ± 10 °C
4.23.6 30 (Db) damp heat, cyclic 55 °C; 5 days > 90 % RH;
5 cycles
4.23.7 - d.c. load U= Umax.; 1 min
-1 (Aa)
Storage at low
temperature - 55 °C; 2 h ± (0.1 % R +0.01Ω)
4.19 14 (Na) Rapid change of
temperature
30 min at - 55 °C and
30 min at 155 °C;
1000 cycles
± (0.5 % R +0.01 Ω)
P70 x R
P70 x R
P70 x R
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 28760
9Revision: 07-May-08
MCT 0603 AT - Professional
Vishay Beyschlag Professional Automotive Thin Film Chip Resistor
4.13 -
Short time
overload;
standard
operation mode U= 2.5 x
2 × Umax.; 5 s
± (0.1 % R +0.01Ω)
Short time
overload;
power
operation mode
± (0.25 % R +0.05Ω)
4.27 -
Single pulse high
voltage overload;
standard
operation mode
Severity no. 4:
U= 10 x
2 x Umax.;
10 pulses
± (0.25 % R +0.05Ω)
Single pulse high
voltage overload;
power
operation mode
± (0.5 % R +0.05Ω)
4.37 -
Periodic electric
overload;
standard
operation mode
U=
2 x Umax.;
0.1 s ON; 2.5 s OFF;
1000 cycles
± (0.5 % R +0.05Ω)
Periodic electric
overload;
power
operation mode
± (1.0 % R +0.05Ω)
--
ESD (Electro Static
Discharge)
MIL-STD-883, Method 3015;
1000 V ± (0.5 % R +0.05Ω)
4.22 6 (Fc) Vibration
Endurance by sweeping;
10 to 2000 Hz;
no resonance;
amplitude 1.5 mm or
200 m/s2; 6 h
± (0.1 % R +0.01Ω)
no visible damage
4.17.2 58 (Td) Solderability
Solder bath method;
SnPb40; non-activated flux
(215 ± 3) °C; (3 ± 0.3) s
Good tinning ( 95 % covered);
no visible damage
Solder bath method;
SnAg3Cu0.5 or SnAg3.5;
non-activated flux;
(245 ± 3) °C; (3 ± 0.2) s
Good tinning (95 % covered);
no visible damage
4.18.2 58 (Td) Resistance to
soldering heat
Solder bath method;
(260 ± 5) °C; (10 ± 1) s
± (0.1 % R +0.01Ω)
no visible damage
4.29 45 (XA) Component solvent
resistance
Isopropyl alcohol + 50 °C;
method 2 No visible damage
4.32 21 (Ue3) Shear (adhesion) RR 1608M; 9 N No visible damage
4.33 21 (Ue1) Substrate bending Depth 2 mm, 3 times ± (0.1 % R +0.01Ω)
no visible damage; no open circuit in bent position
4.7 - Voltage proof Urms = Uins; 60 ± 5 s No flashover or breakdown
4.35 - Flammability Needle flame test; 10 s No burning after 30 s
TEST PROCEDURES AND REQUIREMENTS
EN
60115-1
CLAUSE
IEC
60068-2
TEST
METHOD
TEST PROCEDURE
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR/R)
STABILITY CLASS 0.5
Stability for product types:
MCT 0603 AT 100 Ωto 100 kΩ
P70 x R
P70 x R
15 x P70 x R
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.