www.ti.com
FEATURES
3
2
4
51
NC VCC
Y
A
GND
DCK PACKAGE
(TOP VIEW)
See mechanical drawings for dimensions.
DESCRIPTION/ORDERING INFORMATION
SN74LVC1G06-EPSINGLE INVERTER BUFFER/DRIVER
WITH OPEN-DRAIN OUTPUT
SCES669A – JULY 2006 – REVISED MARCH 2007
•Controlled Baseline Voltages up to 5.5 V– One Assembly Site •Max t
pd
of 4 ns at 3.3 V– One Test Site •Low Power Consumption, 10- µA Max I
CC– One Fabrication Site • ± 24-mA Output Drive at 3.3 V•Extended Temperature Performance of –55 °C•I
off
Supports Partial-Power-Down Modeto 125 °C Operation•Enhanced Diminishing Manufacturing Sources •Latch-Up Performance Exceeds 100 mA Per(DMS) Support JESD 78, Class II•Enhanced Product-Change Notification •ESD Protection Exceeds JESD 22•Qualification Pedigree
(1)
– 2000-V Human-Body Model (A114-A)•Available in the Texas Instruments – 200-V Machine Model (A115-A)NanoStar™ and NanoFree™ Packages
– 1000-V Charged-Device Model (C101)•Supports 5-V V
CC
Operation•Input and Open-Drain Output Accept(1) Component qualification in accordance with JEDEC andindustry standards to ensure reliable operation over anextended temperature range. This includes, but is not limitedto, Highly Accelerated Stress Test (HAST) or biased 85/85,temperature cycle, autoclave or unbiased HAST,electromigration, bond intermetallic life, and mold compoundlife. Such qualification testing should not be viewed asjustifying use of this component beyond specifiedperformance and environmental limits.
The SN74LVC1G06 is a single inverter buffer/driver that is designed for 1.65-V to 5.5-V V
CC
operation.
NanoStar™ and NanoFree™ package technology is a major breakthrough in IC packaging concepts, using thedie as the package.
The output of the SN74LVC1G06 device is open drain and can be connected to other open-drain outputs toimplement active-low wired-OR or active-high wired-AND functions. The maximum sink current is 32 mA.
This device is fully specified for partial-power-down applications using I
off
. The I
off
circuitry disables the outputs,preventing damaging current backflow through the device when it is powered down.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.NanoStar, NanoFree are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Copyright © 2006–2007, Texas Instruments IncorporatedProducts conform to specifications per the terms of the TexasInstruments standard warranty. Production processing does notnecessarily include testing of all parameters.
www.ti.com
Absolute Maximum Ratings
(1)
Recommended Operating Conditions
(1)
SN74LVC1G06-EP
SINGLE INVERTER BUFFER/DRIVERWITH OPEN-DRAIN OUTPUT
SCES669A – JULY 2006 – REVISED MARCH 2007
ORDERING INFORMATION
(1)
T
A
PACKAGE
(2)
ORDERABLE PART NUMBER TOP-SIDE MARKING
(3)
–55 °C to 125 °C SOT (SC-70) – DCK Reel of 3000 SN74LVC1G06MDCKREP
(4)
CBA
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TIWeb site at www.ti.com .(2) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available atwww.ti.com/sc/package.
(3) The actual top-side marking has one additional character that designates the assembly/test site.(4) Product Preview
FUNCTION TABLE
INPUT OUTPUTA Y
H LL H
LOGIC DIAGRAM (POSITIVE LOGIC)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range –0.5 6.5 VV
I
Input voltage range
(2)
–0.5 6.5 VV
O
Voltage range applied to any output in the high-impedance or power-off state
(2)
–0.5 6.5 VV
O
Voltage range applied to any output in the high or low state
(2) (3)
–0.5 6.5 VI
IK
Input clamp current V
I
< 0 V –50 mAI
OK
Output clamp current V
O
< 0 V –50 mAI
O
Continuous output current ±50 mAContinuous current through V
CC
or GND ±100 mAθ
JA
Package thermal impedance
(4)
252 °C/WT
stg
Storage temperature range –65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratingsonly, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operatingconditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.(3) The value of V
CC
is provided in the recommended operating conditions table.(4) The package thermal impedance is calculated in accordance with JESD 51-7.
MIN MAX UNIT
Operating 1.65 5.5V
CC
Supply voltage VData retention only 1.5V
CC
= 1.65 V to 1.95 V 0.65 ×V
CC
V
CC
= 2.3 V to 2.7 V 1.7V
IH
High-level input voltage VV
CC
= 3 V to 3.6 V 2V
CC
= 4.5 V to 5.5 V 0.7 ×V
CC
(1) All unused inputs of the device must be held at V
CC
or GND to ensure proper device operation. See the TI application report,Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
2
Submit Documentation Feedback
www.ti.com
Electrical Characteristics
Switching Characteristics
Operating Characteristics
SN74LVC1G06-EPSINGLE INVERTER BUFFER/DRIVER
WITH OPEN-DRAIN OUTPUT
SCES669A – JULY 2006 – REVISED MARCH 2007
Recommended Operating Conditions (continued)
MIN MAX UNIT
V
CC
= 1.65 V to 1.95 V 0.35 ×V
CC
V
CC
= 2.3 V to 2.7 V 0.7V
IL
Low-level input voltage VV
CC
= 3 V to 3.6 V 0.8V
CC
= 4.5 V to 5.5 V 0.3 ×V
CC
V
I
Input voltage 0 5.5 VV
O
Output voltage 0 5.5 VV
CC
= 1.65 V 4V
CC
= 2.3 V 8I
OL
Low-level output current 16 mAV
CC
= 3 V
24V
CC
= 4.5 V 32V
CC
= 1.8 V ±0.15 V, 2.5 V ±0.2 V 20∆t/ ∆v Input transition rise or fall rate V
CC
= 3.3 V ±0.3 V 10 ns/VV
CC
= 5 V ±0.5 V 5T
A
Operating free-air temperature –55 125 °C
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS V
CC
MIN TYP
(1)
MAX UNIT
I
OL
= 100 µA 1.65 V to 5.5 V 0.1I
OL
= 4 mA 1.65 V 0.45I
OL
= 8 mA 2.3 V 0.3V
OL
VI
OL
= 16 mA 0.43 VI
OL
= 24 mA 0.55I
OL
= 32 mA 4.5 V 0.55I
I
A input V
I
= 5.5 V or GND 0 V to 5.5 V ±1µAI
off
V
I
or V
O
= 5.5 V 0 V ±10 µAI
CC
V
I
= 5.5 V or GND, I
O
= 0 1.65 V to 5.5 V 10 µA∆I
CC
One input at V
CC
– 0.6 V, Other inputs at V
CC
or GND 3 V to 5.5 V 500 µAC
i
V
I
= V
CC
or GND 3.3 V 4 pFC
o
V
O
= V
CC
or GND 3.3 V 5 pF
(1) All typical values are at V
CC
= 3.3 V, T
A
= 25 °C.
over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1 )
V
CC
= 1.8 V V
CC
= 2.5 V V
CC
= 3.3 V V
CC
= 5 VFROM TO
±0.15 V ±0.2 V ±0.3 V ±0.5 VPARAMETER UNIT(INPUT) (OUTPUT)
MIN MAX MIN MAX MIN MAX MIN MAX
t
pd
A Y 2.2 8 1.1 6 1.2 6 1 5.5 ns
T
A
= 25 °C
V
CC
= 1.8 V V
CC
= 2.5 V V
CC
= 3.3 V V
CC
= 5 VPARAMETER TEST CONDITIONS UNITTYP TYP TYP TYP
C
pd
Power dissipation capacitance f = 10 MHz 3 3 4 6 pF
3Submit Documentation Feedback
www.ti.com
PARAMETER MEASUREMENT INFORMATION
VM
th
tsu
From Output
Under Test
CL
(see Note A)
LOAD CIRCUIT
S1 VLOAD
Open
GND
RL
RL
Data Input
Timing Input VI
0 V
VI
0 V
0 V
tw
Input
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VOLTAGE WAVEFORMS
PULSE DURATION
tPLH
tPHL
tPHL
tPLH
VOH
VOH
VOL
VOL
VI
0 V
Input
Output
Waveform 1
S1 at VLOAD
(see Note B)
Output
Waveform 2
S1 at VLOAD
(see Note B)
VOL
tPZL
tPZH
tPLZ
tPHZ
VLOAD/2
0 V
VOL + V∆
VLOAD/2 − V∆
≈0 V
VI
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
Output
Output
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω.
D. The outputs are measured one at a time, with one transition per measurement.
E. Since this device has open-drain outputs, tPLZ and tPZL are the same as tpd.
F. tPZL is measured at VM.
G. tPLZ is measured at VOL + V∆.
H. All parameters and waveforms are not applicable to all devices.
Output
Control
VMVM
VMVM
VMVM
VM
VMVM
VM
VM
VM
VI
VM
VM
1.8 V ± 0.15 V
2.5 V ± 0.2 V
3.3 V ± 0.3 V
5 V ± 0.5 V
1 kΩ
500 Ω
500 Ω
500 Ω
VCC RL
2 × VCC
2 × VCC
6 V
2 × VCC
VLOAD CL
30 pF
30 pF
50 pF
50 pF
0.15 V
0.15 V
0.3 V
0.3 V
V∆
VCC
VCC
3 V
VCC
VI
VCC/2
VCC/2
1.5 V
VCC/2
VM
tr/tf
≤ 2 ns
≤ 2 ns
≤ 2.5 ns
≤ 2.5 ns
INPUT
tPZL (see Notes E and F)
tPLZ (see Notes E and G)
tPHZ/tPZH
VLOAD
VLOAD
VLOAD
TEST S1
VLOAD/2
SN74LVC1G06-EP
SINGLE INVERTER BUFFER/DRIVERWITH OPEN-DRAIN OUTPUT
SCES669A – JULY 2006 – REVISED MARCH 2007
(Open Drain)
Figure 1. Load Circuit and Voltage Waveforms
4
Submit Documentation Feedback
PACKAGING INFORMATION
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
SN74LVC1G06MDCKREP ACTIVE SC70 DCK 5 3000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
V62/06655-01XE ACTIVE SC70 DCK 5 3000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
PACKAGE OPTION ADDENDUM
www.ti.com 29-Mar-2007
Addendum-Page 1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.Customers should obtain the latest relevant information before placing orders and should verify that such information is current andcomplete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’sstandard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support thiswarranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarilyperformed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products andapplications using TI components. To minimize the risks associated with customer products and applications, customers shouldprovide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, maskwork right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or servicesare used. Information published by TI regarding third-party products or services does not constitute a license from TI to use suchproducts or services or a warranty or endorsement thereof. Use of such information may require a license from a third party underthe patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and isaccompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is anunfair and deceptive business practice. TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or servicevoids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive businesspractice. TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product wouldreasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreementspecifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramificationsof their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-relatedrequirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding anyapplications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and itsrepresentatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products arespecifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet militaryspecifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade issolely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements inconnection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI productsare designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use anynon-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products Applications
Amplifiers amplifier.ti.com Audio www.ti.com/audioData Converters dataconverter.ti.com Automotive www.ti.com/automotiveDSP dsp.ti.com Broadband www.ti.com/broadbandInterface interface.ti.com Digital Control www.ti.com/digitalcontrolLogic logic.ti.com Military www.ti.com/militaryPower Mgmt power.ti.com Optical Networking www.ti.com/opticalnetworkMicrocontrollers microcontroller.ti.com Security www.ti.com/securityLow Power www.ti.com/lpw Telephony www.ti.com/telephonyWireless
Video & Imaging www.ti.com/videoWireless www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265Copyright © 2007, Texas Instruments Incorporated
