DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D121 BYD17 series General purpose controlled avalanche rectifiers Product specification Supersedes data of 1996 Sep 26 1999 Nov 11 Philips Semiconductors Product specification General purpose controlled avalanche rectifiers BYD17 series FEATURES * Glass passivated * High maximum operating temperature k handbook, 4 columns a * Low leakage current * Excellent stability MAM061 * Guaranteed avalanche energy absorption capability * Shipped in 8 mm embossed tape Fig.1 Simplified outline (SOD87) and symbol. * Smallest surface mount rectifier outline. DESCRIPTION MARKING Cavity free cylindrical glass package through Implotec(1) technology. TYPE NUMBER MARKING CODE This package is hermetically sealed and fatigue free as coefficients of expansion of all used parts are matched. BYD17D 17D PH BYD17G 17G PH (1) Implotec is a trademark of Philips. BYD17J 17J PH BYD17K 17K PH BYD17M 17M PH LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL VRRM VRWM VR PARAMETER CONDITIONS MIN. MAX. UNIT BYD17D - 200 V BYD17G - 400 V BYD17J - 600 V BYD17K - 800 V BYD17M - 1000 V BYD17D - 200 V BYD17G - 400 V BYD17J - 600 V BYD17K - 800 V BYD17M - 1000 V BYD17D - 200 V BYD17G - 400 V BYD17J - 600 V BYD17K - 800 V BYD17M - 1000 V repetitive peak reverse voltage crest working reverse voltage continuous reverse voltage 1999 Nov 11 2 Philips Semiconductors Product specification General purpose controlled avalanche rectifiers SYMBOL IF(AV) BYD17 series PARAMETER CONDITIONS average forward current MIN. MAX. UNIT Ttp = 105 C; averaged over any 20 ms period; see Figs 2 and 4 - 1.5 A Tamb = 65 C; PCB mounting (see Fig.9); averaged over any 20 ms period; see Figs 3 and 4 - 0.6 A IFSM non-repetitive peak forward current t = 10 ms half sinewave; Tj = Tj max prior to surge; VR = VRRMmax - 20 ERSM non-repetitive peak reverse avalanche energy L = 120 mH; Tj = Tj max prior to surge; inductive load switched off - 7 mJ Tstg storage temperature -65 +175 C Tj junction temperature -65 +175 C MIN. TYP. MAX. IF = 1 A; Tj = Tj max; see Fig.6 - - 0.93 V IF = 1 A; see Fig.6 - - 1.05 V BYD17D 225 - - V BYD17G 450 - - V see Fig.5 A ELECTRICAL CHARACTERISTICS Tj = 25 C; unless otherwise specified. SYMBOL VF V(BR)R IR PARAMETER CONDITIONS forward voltage reverse avalanche breakdown voltage UNIT IR = 0.1 mA BYD17J 650 - - V BYD17K 900 - - V BYD17M 1100 - - V VR = VRRMmax; see Fig.7 - - 1 A VR = VRRMmax; Tj = 165 C; see Fig.7 - - 100 A reverse current trr reverse recovery time when switched from IF = 0.5 A to IR = 1 A; measured at IR = 0.25 A; see Fig.10 - 3 - s Cd diode capacitance - 21 - pF VR = 0 V; f = 1 MHz; see Fig.8 THERMAL CHARACTERISTICS SYMBOL PARAMETER Rth j-tp thermal resistance from junction to tie-point Rth j-a thermal resistance from junction to ambient CONDITIONS note 1 VALUE 30 K/W 150 K/W Note 1. Device mounted on epoxy-glass printed-circuit board, 1.5 mm thick; thickness of copper 40 m, see Fig.9. For more information please refer to the "General Part of associated Handbook". 1999 Nov 11 3 UNIT Philips Semiconductors Product specification General purpose controlled avalanche rectifiers BYD17 series GRAPHICAL DATA MBH394 3 MSC293 1.0 handbook, halfpage IF(AV) (A) IF(AV) 0.8 (A) 2 0.6 0.4 1 0.2 0 0 0 40 120 80 0 160 200 Ttp (C) 120 80 160 200 Tamb (C) a = 1.57; VR = VRRMmax; = 0.5. Device mounted as shown in Fig.9. a = 1.57; VR = VRRMmax; = 0.5. Fig.2 40 Maximum permissible average forward current as a function of tie-point temperature (including losses due to reverse leakage). Fig.3 Maximum permissible average forward current as a function of ambient temperature (including losses due to reverse leakage). MGC736 MBH395 2.5 P (W) 200 handbook, halfpage handbook, halfpage Tj a = 3 2.5 2.0 2 1.57 1.42 ( oC) 150 1.5 100 1.0 D G J K M 50 0.5 0 0 0.4 0.8 1.2 0 1.6 IF(AV) (A) 0 400 800 1200 VR, VRRM (V) a = IF(RMS)/IF(AV); VR = VRRMmax; = 0.5. Fig.4 Solid line = VR. Dotted line = VRRM; = 0.5. Maximum steady state power dissipation (forward plus leakage current losses, excluding switching losses) as a function of average forward current. 1999 Nov 11 Fig.5 4 Maximum permissible junction temperature as a function of reverse voltage. Philips Semiconductors Product specification General purpose controlled avalanche rectifiers BYD17 series MBG048 MGC739 3 10halfpage handbook, 6 handbook, halfpage IR (A) IF (A) 4 10 2 10 2 0 1 0 1 2 VF (V) 0 Solid line: Tj = 25 C. Dotted line: Tj = 175 C. VR = VRRMmax. Fig.6 Fig.7 Forward current as a function of forward voltage; maximum values. 40 80 120 160 200 Tj (oC) Reverse current as a function of junction temperature; maximum values. MGC740 10 2 handbook, halfpage 50 Cd (pF) 4.5 10 50 2.5 1 1 10 102 VR (V) 103 1.25 MSB213 f = 1 MHz; Tj = 25 C. Dimensions in mm. Fig.8 Diode capacitance as a function of reverse voltage; typical values. 1999 Nov 11 Fig.9 5 Printed-circuit board for surface mounting. Philips Semiconductors Product specification General purpose controlled avalanche rectifiers handbook, full pagewidth BYD17 series IF (A) DUT + 10 0.5 25 V t rr 1 50 0 t 0.25 0.5 IR (A) 1.0 Input impedance oscilloscope: 1 M, 22 pF; tr 7 ns. Source impedance: 50 ; tr 15 ns. Fig.10 Test circuit and reverse recovery time waveform and definition. 1999 Nov 11 6 MAM057 Philips Semiconductors Product specification General purpose controlled avalanche rectifiers BYD17 series PACKAGE OUTLINE Hermetically sealed glass surface mounted package; ImplotecTM(1) technology; 2 connectors SOD87 k a (2) D1 L L H DIMENSIONS (mm are the original dimensions) UNIT D D1 H L mm 2.1 2.0 2.0 1.8 3.7 3.3 0.3 D 0 1 2 mm scale Notes 1. Implotec is a trademark of Philips. 2. The marking indicates the cathode. REFERENCES OUTLINE VERSION IEC SOD87 100H03 JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE 99-03-31 99-06-04 DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. 1999 Nov 11 7 Philips Semiconductors - a worldwide company Argentina: see South America Australia: 3 Figtree Drive, HOMEBUSH, NSW 2140, Tel. +61 2 9704 8141, Fax. +61 2 9704 8139 Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213, Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210 Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6, 220050 MINSK, Tel. +375 172 20 0733, Fax. +375 172 20 0773 Belgium: see The Netherlands Brazil: see South America Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor, 51 James Bourchier Blvd., 1407 SOFIA, Tel. +359 2 68 9211, Fax. +359 2 68 9102 Canada: PHILIPS SEMICONDUCTORS/COMPONENTS, Tel. +1 800 234 7381, Fax. +1 800 943 0087 China/Hong Kong: 501 Hong Kong Industrial Technology Centre, 72 Tat Chee Avenue, Kowloon Tong, HONG KONG, Tel. +852 2319 7888, Fax. +852 2319 7700 Colombia: see South America Czech Republic: see Austria Denmark: Sydhavnsgade 23, 1780 COPENHAGEN V, Tel. +45 33 29 3333, Fax. +45 33 29 3905 Finland: Sinikalliontie 3, FIN-02630 ESPOO, Tel. +358 9 615 800, Fax. +358 9 6158 0920 France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex, Tel. +33 1 4099 6161, Fax. +33 1 4099 6427 Germany: Hammerbrookstrae 69, D-20097 HAMBURG, Tel. +49 40 2353 60, Fax. +49 40 2353 6300 Hungary: see Austria India: Philips INDIA Ltd, Band Box Building, 2nd floor, 254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025, Tel. +91 22 493 8541, Fax. +91 22 493 0966 Indonesia: PT Philips Development Corporation, Semiconductors Division, Gedung Philips, Jl. Buncit Raya Kav.99-100, JAKARTA 12510, Tel. +62 21 794 0040 ext. 2501, Fax. +62 21 794 0080 Ireland: Newstead, Clonskeagh, DUBLIN 14, Tel. +353 1 7640 000, Fax. +353 1 7640 200 Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053, TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007 Italy: PHILIPS SEMICONDUCTORS, Via Casati, 23 - 20052 MONZA (MI), Tel. +39 039 203 6838, Fax +39 039 203 6800 Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku, TOKYO 108-8507, Tel. +81 3 3740 5130, Fax. +81 3 3740 5057 Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL, Tel. +82 2 709 1412, Fax. +82 2 709 1415 Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR, Tel. +60 3 750 5214, Fax. +60 3 757 4880 Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905, Tel. +9-5 800 234 7381, Fax +9-5 800 943 0087 Middle East: see Italy Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB, Tel. +31 40 27 82785, Fax. +31 40 27 88399 New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND, Tel. +64 9 849 4160, Fax. +64 9 849 7811 Norway: Box 1, Manglerud 0612, OSLO, Tel. +47 22 74 8000, Fax. +47 22 74 8341 Pakistan: see Singapore Philippines: Philips Semiconductors Philippines Inc., 106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI, Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474 Poland: Al.Jerozolimskie 195 B, 02-222 WARSAW, Tel. +48 22 5710 000, Fax. +48 22 5710 001 Portugal: see Spain Romania: see Italy Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW, Tel. +7 095 755 6918, Fax. +7 095 755 6919 Singapore: Lorong 1, Toa Payoh, SINGAPORE 319762, Tel. +65 350 2538, Fax. +65 251 6500 Slovakia: see Austria Slovenia: see Italy South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale, 2092 JOHANNESBURG, P.O. Box 58088 Newville 2114, Tel. +27 11 471 5401, Fax. +27 11 471 5398 South America: Al. Vicente Pinzon, 173, 6th floor, 04547-130 SAO PAULO, SP, Brazil, Tel. +55 11 821 2333, Fax. +55 11 821 2382 Spain: Balmes 22, 08007 BARCELONA, Tel. +34 93 301 6312, Fax. +34 93 301 4107 Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM, Tel. +46 8 5985 2000, Fax. +46 8 5985 2745 Switzerland: Allmendstrasse 140, CH-8027 ZURICH, Tel. +41 1 488 2741 Fax. +41 1 488 3263 Taiwan: Philips Semiconductors, 6F, No. 96, Chien Kuo N. Rd., Sec. 1, TAIPEI, Taiwan Tel. +886 2 2134 2886, Fax. +886 2 2134 2874 Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd., 209/2 Sanpavuth-Bangna Road Prakanong, BANGKOK 10260, Tel. +66 2 745 4090, Fax. +66 2 398 0793 Turkey: Yukari Dudullu, Org. San. Blg., 2.Cad. Nr. 28 81260 Umraniye, ISTANBUL, Tel. +90 216 522 1500, Fax. +90 216 522 1813 Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7, 252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461 United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes, MIDDLESEX UB3 5BX, Tel. +44 208 730 5000, Fax. +44 208 754 8421 United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409, Tel. +1 800 234 7381, Fax. +1 800 943 0087 Uruguay: see South America Vietnam: see Singapore Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD, Tel. +381 11 62 5344, Fax.+381 11 63 5777 For all other countries apply to: Philips Semiconductors, International Marketing & Sales Communications, Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825 Internet: http://www.semiconductors.philips.com SCA 68 (c) Philips Electronics N.V. 1999 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 135002/03/pp8 Date of release: 1999 Nov 11 Document order number: 9397 750 06275 Phil...: Product information on BYD17 series, General purpose controlled avalanche rectifier Page 1 of 3 Select & Go... Go to Philips Semiconductors' home page Start Catalog & Datasheets Catalog by Function Discrete semiconductors Audio Clocks and Watches Data communications Microcontrollers Peripherals Standard analog Video Wired communications Wireless communications Catalog by System Automotive Consumer Multimedia Systems Communications PC/PC-peripherals Cross reference Models BYD17 series; General purpose controlled avalanche rectifiers * Description * Features * Datasheet * Products, packages, availability and ordering * Find similar products To be kept informed on * Description Cavity free cylindrical glass package through Implotec(1) technology. This package is hermetic sealed and fatigue free as coefficients of expansion of all used parts are matched. (1) Implotec is a trademark of Philips. Packages Application notes Features Selection guides Other technical documentation End of Life information Datahandbook system l l l l Relevant Links About catalog tree About search About this site Subscribe to eNews Catalog & Datasheets Search BYD17 series BYD17 series l l l Glass passivated High maximum operating temperature Low leakage current Excellent stability Guaranteed avalanche energy absorption capability Shipped in 8 mm embossed tape Smallest surface mount rectifier outline. Datasheet Type nr. Title BYD17 General purpose controlled series avalanche rectifiers Publication Page release date Datasheet status count 11-Nov-99 Product 8 Specification File size (kB) 54 Products, packages, availability and ordering file://\\Roarer\root\data13\imaging\BITTING\cpl_mismatch\20000819\0818200...\BYD17J.htm 8/21/00 Phil...: Product information on BYD17 series, General purpose controlled avalanche rectifier Page 2 of 3 North Order code Partnumber American (12nc) Partnumber marking/packing package device status Standard 9338 122 30115 Marking * Reel Pack, SMD Standard Marking * Reel 9338 122 30135 Pack, SMD, Large Standard BYD17G BYD17G 9338 122 40115 Marking * Reel T/R Pack, SMD Standard Marking * Reel 9338 122 40135 Pack, SMD, Large Standard BYD17J BYD17J 9338 122 50115 Marking * Reel T/R Pack, SMD Standard Marking * Reel BYD17J /T3 9338 122 50135 Pack, SMD, Large Standard Marking * Reel BYD17J/DE 9340 244 60135 Pack, SMD, Large Standard Marking * Reel BYD17K 9338 122 60135 Pack, SMD, Large Standard BYD17M BYD17M 9338 122 70115 Marking * Reel T/R Pack, SMD Standard Marking * Reel 9338 122 70135 Pack, SMD, Large BYD17D BYD17D T/R SOD87 Full production SOD87 Full production SOD87 Full production SOD87 Full production SOD87 Full production SOD87 Full production SOD87 Full production SOD87 Full production SOD87 Full production SOD87 Full production Please read information about some discontinued variants of this product. Find similar products: BYD17 series links to the similar products page containing an overview of products that a in function or related to the part number(s) as listed on this page. The similar products page incl products from the same catalog tree(s) , relevant selection guides and products from the same category. Copyright (c) 2000 Royal Philips Electronics All rights reserved. Terms and conditions. file://\\Roarer\root\data13\imaging\BITTING\cpl_mismatch\20000819\0818200...\BYD17J.htm 8/21/00 Phil...: Product information on BYD17 series, General purpose controlled avalanche rectifier Page 3 of 3 file://\\Roarer\root\data13\imaging\BITTING\cpl_mismatch\20000819\0818200...\BYD17J.htm 8/21/00