NEW RFID System V680 Series Next-Generation RFID System Conforming to ISO/IEC 18000-3 (ISO/IEC 15693). Visualize data transmission on production lines. Managing process instructions and histories for engine manufacturing Managing manufacturing process traceability Managing the manufacture of LCDs and color filters Managing dies, die histories, and die service lives Versatile Functions for Optimal Use on Production Lines Conforms to ISO/IEC 18000-3 (ISO/IEC 15693) Can be used in many countries around the world. The V680 Series can be used in many parts of the world because it meets the requirements of radio wave regulations in Japan, Europe, the U.S.A., Canada, Mexico, Singapore, Malaysia, the Philippines, China, Hong Kong, Taiwan, and Korea. Contact your OMRON sales representative for details on use in other countries. Enables High-speed Data Transmission High-speed transmission of 27 kbps achieved. The V680 Series offers data transmission speeds as high as 27 kbps at an operating frequency of 13.56 MHz, and dramatically shortens turn around time (TAT) with a Self-execution Mode that eliminates the need for host access. Self-execution system ID Tag transmission time Judgment and instruction Conventional system Host send (response) judgment and instruction time Host send (command) time Judgment and instruction ID Tag transmission time TAT TAT A Wide Range of ID Tags Available for Various Production Lines These ultra-compact Tags also feature high environmental durability, long service lives, and maintenance-free operation. ID Tags can be either embedded in metal or mounted on non-metallic objects without requiring any extra attachments. A long service life enables 10 billion accesses. (for tag which Memory type use FRAM) A new battery-less model with a large, 32-Kbyte capacity has been added to the line-up. In addition to managing the growing amount of production and quality data on today's factory floors, this new Tag makes it easy to build a system with traceability. The V680 Series features the same level of environmental durability as the previous V600 Series. 10 billion accesses Long service life Battery-less No Changes Needed when Switching from an Existing System The V680 Series also supports V600-series commands, so there is no need to change command systems. Easier Startup and Maintenance. Simpler Operation. Lets You Visualize Data Transmission Contributes to higher efficiency for on-site startup and maintenance. Seven maintenance modes make it easy to diagnose the optimal usage conditions for the V680 RFID System. Startup is also easier because the system can be checked without having to use a personal computer or other host device. Maintenance modes are quickly switched with the DIP switch on the front of the Controller. The Amplifier Unit is also equipped with an indicator that displays the communications condition, for easy confirmation from the location nearest the production line. Strong Support for Creating ID Tag Memory Maps Using the ID Map Manager dramatically shortens the time required to allocate ID Tag memory and complete system designs. Work efficiency is greatly increased because the ID Map Manager includes an ID Tag read/write test function and communications checking function in addition to memory map definition and editing functions. Memory map data created by the ID Map Manager can also be easily shared between the production line design department and the vendors that are building the line. V680-A-IMMEG-P01 Visualize Data Transmission without the Need for a Host Device. Perform Simple Diagnosis of Communications Conditions. Distance Level Measurement Mode Confirms correct mounting positions for the Read/Write Antenna and ID Tag. The distance between the Read/Write Antenna and ID Tag mounting locations relative to the communications range is displayed using six levels. Distance level "--" Controller Amplifier Unit ID Tag "01" "02" "03" "04" "05" "06" Read/Write Antenna Distant Close Noise Level Measurement Mode Confirms spatial noise, noise sources, and noise countermeasure effects. Measures the ambient noise level and displays it in levels ranging from 00 to 99. Controller Read/Write Antenna Little noise Much noise Speed Level Measurement Mode (Read/Write) Confirms the speed of moving ID Tags and the number of usable bytes. Data is transmitted repeatedly to moving ID Tags, and the number of successful communications and speed level are displayed in levels ranging from 01 to 99. (No data is actually written to the ID Tags during the write part of the Speed Level Measurement Mode.) Controller Movement ID Tag Read/Write Antenna More than 99 successful communications Seven maintenance modes make it easy to diagnose the communications conditions from the front panel of the Controller or Amplifier Unit. The data can also be output from the USB port of the Controller to a personal computer or other monitoring device. (Maintenance Mode cannot be used with the V680-H01 or V680-CH.) Communications Success Rate Measurement Mode Confirms the communications success rate between the Read/Write Antenna and ID Tags. A total of 100 communications are executed without retries, and the rate of communications success is displayed in levels ranging from 01 to 99. Controller ID Tag 100 communications Read/Write Antenna Communications successes: 23 Host Device Communications Monitor Mode (Protocol Analyzer Function) This mode can be used as a protocol analyzer function for host device communications lines. The communications commands sent from the host device and the execution result responses can be output from the USB port of the Controller. Monitor Host device Command: RDSTH100100010*CR Monitor: RDSTH100100010*CR RD72*CR Read/Write Antenna Personal computer Programmable Controller (PLC) Notebook PC Response: RD72*CR Tag Communications Test Mode Confirms communications ability between the Read/Write Antenna and ID Tags. The end codes are displayed to show the results of communications between the Read/Write Antenna and ID Tags. When the Controller is mounted inside a control panel, or in some other location, this data can be output from the Controller's USB port and easily checked on a monitor. (The Tag Communications Test Mode uses only read operations.) Controller Normal communication Communications error Host Device Communications Confirmation Mode Confirms whether the signals sent from the Controller are being correctly transferred to an external device. The communications commands and responses between the Controller and a host device are output from the Controller's USB port for easy identification of problems, such as incorrect communications parameters or wiring. RFID System V680 Series New, Next-generation RFID Systems with ISO/IEC 18000-3 (ISO/IEC15693) Compliance * High-Speed, 27kbps communication rate. For V680-D@KF68, communication rate from tag to Antenna is 53kbps. * Read/Write Antennas and ID Tags with excellent environmental resistance. * Wide line-up of ultra-compact, long-life ID Tags, with capacities from 1 to 32 kbytes. * Seven modes make it possible to visualize data transmission. * ID Map Manager simplifies memory map designing for ID Tags. * Complies with FCC Standards and R&TTE Directive. System Configuration Connect V680 Read/Write Antennas and Amplifier Units to a V680-series Controller, and read or write data from or to ID Tags. Controller Type Host Device Personal computer Standard Programmable Controller SYSMAC CJ/CS Series Controller Standard 1-channel Controller V680-CA5D01-V2 Standard 2-channel Controller V680-CA5D02-V2 CS/CJ-series PLC I/O Sensor Units (1 or 2 channels) CJ1W-V680C11/C12 CS1W-V680-C11/C12 The V680-H01-V2 can be used only with 1-channel Controllers or I/O Sensor Units. Extension Cable Amplifier Unit For 1-Kbyte ID Tags V680-HA63A For 2-, 8-, or 32-Kbyte ID Tags V680-HA63B Cable length (5/10) M Cable length (5/10) M V700-A40-W Cable length (2/5/10/20/30) M The maximum extendable cable length is 30 m. Two Extension Cables cannot be connected to each other. Read/Write Antenna V680-H01-V2 Cable length 0.5 M V680-HS51 Cable length 2 M V680-HS52 Cable length (2/12.5) M V680-HS63 Cable length (2/12.5) M V680-HS65 Cable length (2/12.5) M An Amplifier is not required. It is built in. ID Tag 1-kbyte ID Tags 2-kbyte ID Tags V680-D1KP53M V680-D1KP52MT 8-kbyte ID Tags 6 V680-D1KP66T V680-D1KP66MT V680-D1KP54T V680-D8KF67 V680-D8KF67M V680 Series RFID System V680-D1KP58HT V680-D2KF52M V680-D1KP66T-SP V680-D8KF68 32-kbyte ID Tags V680-D32KF68 V680-D2KF67 V680-D2KF67M Max. extended length: 30.5 m The maximum extendable cable length is 40 m. (Not including the Amplifier or Antenna.) Do not connect more than two Extension Cables to each other. Max. extended length: 62.5 m V700-A40/41/42/43/44/45 Cable length (2/3/5/10/20/30) M Handheld Type Host Device Standard Programmable Controller SYSMAC Series Handheld Terminal (Recommended: Psion Teklogix Handheld Terminal) Personal computer Handheld Reader Writer Standard Serial Handheld Reader Writer V680-CH1D AC Adapter (order separately) V600-A22 Handheld Reader Writer for Psion Teklogix Handheld Terminal V680-CH1D-PSI USB Handheld Reader Writer V680-CHUD ID Tags 1-kbyte ID Tags 2-kbyte ID Tags V680-D1KP53M V680-D1KP52MT V680-D1KP66T V680-D1KP66MT V680-D1KP54T V680-D1KP58HT V680-D2KF52M V680-D1KP66T-SP 8-kbyte ID Tags V680-D2KF67 V680-D2KF67M 32-kbyte ID Tags V680-D8KF67 V680-D8KF67M V680-D8KF68 V680-D32KF68 Connection List for Amplifier Unit, Antena, and Tag Amplifier Unit Antenna EEPROM 1-kbyte V680D1KP52MT For 1-kbyte ID Tags V680-HA63A V680-HS51 V680-HS52 V680-HS63 x x x (See note 1.) V680D1KP53M x x V680-HS65 V680D1KP54T x x x V680-H01-V2 (Read/Write Antenna with Built-in Amplifier) V680-CH@D (Handheld Rader Writer) Amplifier Unit x x x Antenna V680D1KP66T x x x x x V680D2KF52M V680-HS51 V680-HS52 V680-HS63 x x x (See note 1.) V680-HS65 V680-H01-V2 (Read/Write Antenna with Built-in Amplifier) V680-CH@D (Handheld Rader Writer) x x x x V680V680D1KP66T-SP D1KP58HT x x x x x x FRAM 2-kbyte For 2/8/32-kbyte ID Tags V680-HA63B V680D1KP66MT x V680D2KF67 x x x x x 8-kbyte V680D2KF67M x x x x V680D8KF67 x x x x x V680D8KF67M x x x x 32-kbyte V680D8KF68 x x x x V680D32KF68 x x x x Note 1. Use a V680-HS51/HS52 Antenna if the V680-D1KP52MT or V680-D2KP52M is to be embedded in metal. V680-HS63 Antenna can not be used in this condition. 2. For details, refer to the following User's Manuals (Cat. No. Z248, Z249, Z262, Z271 and Z272). Transmission is also possible with ID Tags other than those of the V680 Series as long as they comply with ISO/IEC 18000-3 (ISO/IEC 15693). However, transmission with ID Tags other than those of the V680 Series cannot be assured. The user must confirm transmission capabilities carefully prior to use. V680 Series RFID System 7 Ordering Information ID Tag Type Battery-less Memory capacity Appearance 1 kbyte 2 kbytes Size Metallic compatibility Model 8 dia. u 5 mm For embedding in metallic V680-D1KP52MT or non-metallic surface 10 dia. u 4.5 mm For embedding in metallic V680-D1KP53M or non-metallic surface 20 dia. u 2.7 mm For flush mounting on non-metallic surface V680-D1KP54T 34 u 34 u 3.5 mm For flush mounting on metallic surface V680-D1KP66MT For flush mounting on non-metallic surface V680-D1KP66T 95 u 36.5 u 6.5 mm For flush mounting on non-metallic surface V680-D1KP66T-SP 80 dia. u t10 mm For flush mounting on non-metallic surface V680-D1KP58HT 8 dia. u 5 mm For embedding in metallic V680-D2KF52M or non-metallic surface 40 u 40 u 4.5 mm For flush mounting on metallic surface V680-D2KF67M For flush mounting on non-metallic surface V680-D2KF67 For flush mounting on metallic surface V680-D8KF67M For flush mounting on non-metallic surface V680-D8KF67 For flush mounting on non-metallic surface V680-D8KF68 8 kbytes 86 u 54 u 10 mm 32 kbytes V680-D32KF68 Read/Write Antenna (Detachable Amplifier Unit Type) Type Cylindrical Appearance Standard cable, waterproof connector Size M22 u 65 mm Flexible cable, nonwaterproof connector Square Model V680-HS52-W 2M 12.5 m V680-HS52-W 12.5M 2m V680-HS52-R 2M 12.5 m V680-HS52-R 12.5M Standard cable, nonwaterproof connector M12 u 35 mm 2m V680-HS51 2M Standard cable, waterproof connector 40 u 53 u 23 mm 2m V680-HS63-W 2M 12.5 m V680-HS63-W 12.5M 2m V680-HS63-R 2M Flexible cable, nonwaterproof connector Standard cable, waterproof connector Flexible cable, nonwaterproof connector 8 Cable length 2m V680 Series RFID System 100 u 100 u 30 mm 12.5 m V680-HS63-R 12.5M 2m V680-HS65-W 2M 12.5 m V680-HS65-W 12.5M 2m V680-HS65-R 2M 12.5 m V680-HS65-R 12.5M Read/Write Antenna with Built-in Amplifier Type Appearance Size Cable length 250 u 200 u 35 mm Square Model 0.5 m (See note.) V680-H01-V2 Note: Use an Antenna Cable (V700-A40-W @M) to connect the Read/Write Antenna to the Controller. The maximum cable length is 30.5 m. Amplifier Unit Type Appearance Size Cable length 25 u 40 u 65 mm For 1-kbyte memory For 2-/8-/32-kbyte memory Model 5m V680-HA63A 5M 10 m V680-HA63A 10M 5m V680-HA63B 5M 10 m V680-HA63B 10M Controller Type No. of connectable Amplifiers DC power supply Appearance Size Transmission interface 105 u 90 u 65 mm Single RS232C, RS422/RS485 Model V680-CA5D01-V2 Dual V680-CA5D02-V2 ID Sensor Units Type Unit name Connected ID System V680 Series CJ1 Special I/O Unit 1 Head External No. of unit Current consumption (A) power supply numbers used 5V 24 V External --- 2 Heads Type Unit name CS1 Special I/O Unit Connected ID System V680 Series Model 1 unit number 0.26 0.13 (See note.) --- CJ1WV680C11 2 unit number 0.32 0.26 --- CJ1WV680C12 External No. of unit power supply numbers used Current consumption (A) 5V 26 V Model External 1 Head --- 1 unit number 0.26 0.13 (See note.) --- CS1WV680C11 2 Heads 24 VDC 2 unit number 0.32 --- 0.36 CS1WV680C12 Note: When connected to the V680-H01: 0.28 A Handheld Reader Writers Name Model Model with standard serial connector V680-CH1D Model with USB connector and 0.8-m cable V680-CHUD 0.8M Model with USB connector and 1.9-m cable V680-CHUD 1.9M Models for Psion Teklogix Handheld Terminal V680-CH1D-PSI AC Adapter (for V680-CH1D) V600-A22 V680 Series RFID System 9 Accessories (Order Separately) ID Tag Attachment Type Appearance Model For the V680-D1KP66T V600-A86 For the V680-D@KF68 V680-A81 To mount the V680-D1KP58HT V680-A80 For the V680-D1KP54T V700-A80 Amplifier Unit Special Extension Cable (Amplifier Unit to Controller) Cable length Appearance Model 2m V700-A40 2M. 3m V700-A41 3M. 5m V700-A42 5M. 10 m V700-A43 10M. 20 m V700-A44 20M. 30 m V700-A45 30M. Note: The cable can be extended up to 40 m. Up to two extension cables can be used. V680-H01 Read/Write Antenna Special Cable (Read/Write Antenna to Controller) Cable length Appearance Model 2m V700-A40-W 2M 5m V700-A40-W 5M 10 m V700-A40-W 10M 20 m V700-A40-W 20M 30 m V700-A40-W 30M Note: The cable can be extended up to 30 m. Only one extension cable can be used. RS-232C Communications Connector Name Model Connector Plug XM3B-0922-111 Connector Hood XM2S-0911 Note: An RS422/RS485 Communications Connector is attached to the Controller (V680-CA5D0X-V2). ID Map Manager (for Windows) Type English version 10 Model V680-A-IMMEG-P01 V680 Series RFID System Psion Teklogix Handheld Terminals We recommend connecting the V600-V680-CH-PSI Handheld Reader Writer to a Psion Teklogix WORKABOUT PRO-series Handheld Terminal. Psion Teklogix products can be purchased directly from OMRON. Handheld Terminal Set Name Handheld Terminal Set (English OS) Configuration OMRON model number Handheld Terminal, Serial End Cap, hand strap, charger V680-A-7527S-G2-EG-S (standard model), and High-capacity Battery Note: The Handheld Terminal Set includes the V600/V680 EasyAccess/CBAccess Demo Software preinstalled in a 7527S-G2 Psion Teklogix Handheld Terminal and the configuration parts listed above. Handheld Terminal Only Name Handheld Terminal (English OS) Configuration Appearance Handheld Terminal, Serial End Cap, and hand strap (Battery sold separately.) OMRON model number V680-A-7527S-G2-EG Note: The Handheld Terminal includes the V600/V680 EasyAccess/CBAccess Demo Software preinstalled in a 7527S-G2 Psion Teklogix Handheld Terminal and the configuration parts listed above. The High-capacity Battery is not included. Handheld Terminal Accessories Name Appearance Psion Teklogix model number OMRON model number High-capacity Battery WA3006 V680-A-WA3006 Charger (standard model) PS1050-G1 V680-A-CA1053 Charger (advanced model) WA4003-G2 V680-A-WA4003 Carrying Case WA6197-G2 V680-A-WA6197 Refer to the following website for detailed information on Psion Teklogix Handheld Terminals. http://www.psionteklogix.com/products/handheld/workaboutpro.htm V680 Series RFID System 11 Ratings and Performance ID Tag (1-kbyte Memory) Model Item Memory capacity Memory type Data backup time (See note 1.) Memory longevity Ambient operating temperature (during transmission) Ambient storage temperature (during data backup) Ambient operating humidity Degree of protection V680-D1KP52MT V680-D1KP53M V680-D1KP54T V680-D1KP66T V680-D1KP66MT V680-D1KP66T -SP 1,000 byte (user area) EEPROM 10 years after writing (85qC max.) 100,000 times per block (at 25qC) 25 to 85qC (with no icing) 25 to 70qC (with no icing) 40 to 110qC (with no icing) 40 to 125qC (with no icing) Heat resistance: 1,000 thermal cycles each of 30 minutes at 10qC/150qC, Hightemperature storage: 1,000 hours at 150qC (See note 2.) 200 thermal cycles each of 30 minutes at 10qC/180qC, High-temperature storage: 200 hours at 180qC (See note 3.) 35 to 95% IEC 60529, IP68 IP67 In-house standard for antenna oil resistance (former JEM1030 standard equivalent to IP67g) (See note 4.) Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) 8 dia. u 5 mm 10 dia. u 4.5 mm 20 dia. u 2.7 mm 34 u 34 u 3.5 mm (DIN698373) Appearance Materials Case: PPS resin Filling: Epoxy resin Molding: PPS resin Weight Metallic compatibility Approx. 0.5 g Yes Approx. 2 g No Approx. 1 g Yes Approx. 6 g No Approx. 7.5 g Yes 95 u 36.5 u 6.5 mm (excluding protrusions) External resin: PFA Tag body: PPS resin Approx. 20 g No Note 1. Refer to the User's Manual (Cat. No. Z262) for data backup time for temperatures of 85qC or higher. If the V680 has been stored at 125qC or higher, write the data again even if the data does not need to be changed. 2. 150qC heat resistance: The heat resistance has been checked at 150qC for up to 1,000 hours, and thermal shock has been checked through testing 1,000 thermal cycles each of 30 minutes at 10/150qC. (Test samples: 22, defects: 0) 3. 180qC heat resistance: The heat resistance has been checked at 180qC for up to 200 hours, and thermal shock has been checked through testing 200 thermal cycles each of 30 minutes at 10qC/180qC. (Test samples: 22, defects: 0) 4. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM1030 standard. 5. For details, refer to the User's Manual (Cat. No. Z262). ID Tag with 1-kbyte Memory with High-temperature Capability Item Model Memory capacity Memory type Data backup time Memory longevity Ambient operating temperature (during transmission) Ambient storage temperature (during data backup) Ambient operating humidity Degree of protection Vibration resistance Shock resistance Materials Weight V680-D1KP58HT 1,000 byte (user area) EEPROM 10 years after writing (See note.) 100,000 times per block (at 85qC) 10 to 85qC (with no icing) 40 to 110qC (with no icing) Heat resistance: 2,000 thermal cycles each of 30 minutes at room temperature/200qC (Refer to Heat Resistance, below, for details.) No limits. IEC 60529, IP67 10 to 2,000 Hz, 3.0-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) PPS resin Approx. 90 g Note: The data storage time at high temperatures (110 to 200qC) is 10 hours. Rewrite the data before 10 hours has lapsed. Heat Resistance Sufficient heat resistance has been confirmed by evaluation testing comprising 2,000 thermal cycles each of 30 minutes at room temperature/ 200qC. The lifetime of the V680-D1KP58HT is affected by high-temperature storage, due to the effects of high temperatures on internal components. For details on the relationship between heat resistance and lifetime, refer to the User's Manual (Cat. No. Z262). 12 V680 Series RFID System ID Tag (2-kbyte Memory) Item Model V680-D2KF52M Memory capacity 2,000 bytes (user area) Memory type FRAM V680-D2KF67 V680-D1KF67M Data backup time (See note 1.) 10 years after writing (55qC or less) Memory longevity 10 billion times per block. Access frequency (See note 2.): 10 billion times Ambient operating temperature 25 to 85qC (with no icing) Ambient storage temperature 40 to 85qC (with no icing) Ambient operating humidity 35 to 95% Degree of protection IEC 60529, IP67 In-house standard for antenna oil resistance (former JEM1030 standard equivalent to IP67g) (See note 3.) Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 8 dia. u 5 mm 40 u 40 u 4.5 mm Materials Case: PPS resin Filling: Epoxy resin Molding: PBT resin Filling: Epoxy resin Weight Approx. 0.5 g Approx. 6.5 g Approx. 7 g Metallic compatibility Yes No Yes 35 to 85% Note 1. Refer to the User's Manual (Cat. No. Z248) for data backup time for temperatures of 55qC or higher. 2. The total Read or Write communication frequency is called the access frequency. 3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM1030 standard. 4. For details, refer to the User's Manual (Cat. No. Z248). ID Tag with 8-/32-kbyte Memory Item Model V680-D8KF67 Memory capacity 8,192 bytes (user area) Memory type FRAM V680-D8KF67M V680-D8KF68 V680-D32KF68 32,744 bytes (user area) Data backup time (See note 1.) 10 years (at 70qC max.) after data is written Memory longevity 10 billion times per block at 85qC max. Access frequency (See note 2.): 10 billion times Ambient operating temperature 20 to 85qC (with no icing) Ambient storage temperature 40 to 85qC (with no icing) Ambient operating humidity 35 to 85% Degree of protection IEC 60529, IP67 In-house standard for antenna oil resistance (former JEM1030 standard equivalent to IP67g) (See note 3.) Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 10 to 500 Hz, 1.5-mm double amplitude at 100 m/s2 acceleration with 10 sweeps in X, Y, and Z directions acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each for 11 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Dimensions 40 u 40 u 4.5 mm Materials Case: PBT resin Filling: Epoxy resin Weight Approx. 8 g Approx. 8.5 g Approx. 50 g Metallic compatibility No Yes No 86 u 54 u 10 mm Note 1. Refer to the User's Manual (Cat. No. Z248) for data backup time for temperatures of 70qC or higher. 2. The total Read or Write communication frequency is called the access frequency. 3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM1030 standard. 4. For details, refer to the User's Manual (Cat. No. Z248). V680 Series RFID System 13 Cylindrical Read/Write Antenna (Detachable Amplifier Unit Type) Model Item V680-HS52-W (Standard Cable, Waterproof Connector) V680-HS52-R (Flexible Cable, Non-waterproof Connector) V680-HS51 (Standard Cable, Non-waterproof Connector) Ambient operating temperature 10 to 60qC (with no icing) Ambient storage temperature 25 to 75qC (with no icing) Ambient operating humidity 35% to 95% (with no condensation) Insulation resistance 20 M: min. (at 500 VDC) between the cable terminals and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. Degree of protection IP67 (IEC60529) IP67 (IEC60529) In-house standard for antenna oil In-house standard for antenna oil resistance (former JEM1030 standard resistance (former JEM1030 standard equivalent to IP67g) (Read/Write Antenna portion) (See note 2.) equivalent to IP67g) (Read/Write Antenna portion) (See note 1.) Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each 10 to 2,000 Hz variable vibration, 1.5mm double amplitude at 150 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 15 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) 1,000 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance M22 u 65 mm M12 u 35 mm Materials ABS, brass, epoxy resin filling Weight Approx. 850 g (with 12.5-m cable) Approx. 55 g (with 2-m cable) Note 1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM1030 standard. 2. The Connector is not waterproof. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM1030 standard. 3. For details, refer to the User's Manual (Cat. No. Z248 or Z262). Square Read/Write Antenna (Detachable Amplifier Unit Type) Model Item V680-HS63-W (Standard Cable, Waterproof Connector) V680-HS63-R (Flexible Cable, Non-waterproof Connector) Ambient operating temperature 10 to 60qC (with no icing) Ambient storage temperature 25 to 75qC (with no icing) Ambient operating humidity 35% to 95% (with no condensation) Insulation resistance 20 M: min. (at 500 VDC) between the cable terminals and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. Degree of protection IP67 (IEC60529) In-house standard for antenna oil resistance (former JEM1030 standard equivalent to IP67g) (Read/Write Antenna portion) (See note 1.) Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 40 u 53 u 23 mm Materials ABS, epoxy resin filling Weight Approx. 850 g (with 12.5-m cable) Model Item V680-HS65-W (Standard Cable, Waterproof Connector) IP67 (IEC60529) In-house standard for antenna oil resistance (former JEM1030 standard equivalent to IP67g) (Read/Write Antenna portion) (See note 2.) V680-HS65-R (Flexible Cable, Non-waterproof Connector) Ambient operating temperature 25 to 70qC (with no icing) Ambient storage temperature 40 to 85qC (with no icing) Ambient operating humidity 35% to 95% (with no condensation) Insulation resistance 20 M: min. (at 500 VDC) between the cable terminals and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. Degree of protection IP67 (IEC 60529) IP67 (IEC 60529) In-house standard for antenna oil resistance (former JEM1030 standard equivalent to IP67g) (Read/Write Antenna portion) (See note 1.) In-house standard for antenna oil resistance (former JEM1030 standard equivalent to IP67g) (Read/Write Antenna portion) (See note 2.) Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 100 u 100 u 30 mm Materials ABS, epoxy resin filling Weight Approx. 1,100 g (with 12.5-m cable) Note 1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM1030 standard. 2. The Connector is not waterproof. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM1030 standard. 3. For details, refer to the User's Manual (Cat. No. Z248 or Z262). 14 V680 Series RFID System Square Read/Write Antenna with Built-in Amplifier Item Model Ambient operating temperature Ambient storage temperature Ambient operating humidity Insulation resistance Dielectric strength Degree of protection Vibration resistance Shock resistance Appearance Material Weight Cable length V680-H01-V2 10 to 55qC (with no icing) 35 to 65qC (with no icing) 35% to 85% (with no condensation) 20 M: min. (at 100 VDC) between the back plate and the case 1,000 VAC (50/60 Hz) for 1 minute between the back plate and the case with a current leakage of 1 mA max. IEC 60529: IP63 (Mounting direction: Transmission surface facing up) 10 to 150 Hz variable vibration, 0.7-mm double amplitude with 4 sweeps in X, Y, and Z directions for 8 minutes each 150 m/s2 in X, Y, and Z directions 3 times each 200 u 250 u 40 mm Polycarbonate (PC) resin, ASA resin / Rear Panel: Aluminum Approx. 900 g 0.5 m Note: For details, refer to the User's Manual (Cat. No. Z248 or Z262). Amplifier Unit Item Model Ambient operating temperature Ambient storage temperature Ambient operating humidity Insulation resistance Dielectric strength Degree of protection Vibration resistance Shock resistance Appearance Material Weight Cable length Transmittable ID Tags V680-HA63A V680-HA63B 10 to 55qC (with no icing) 25 to 65qC (with no icing) 35% to 85% (with no condensation) 20 M: min. (at 500 VDC) between the cable terminals and the case 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. IP40 (IEC60529) (See note 1.) IP67/IP65 (IEC60529) (See note 2.) 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) 25 u 40 u 65 mm (not including projections) Polycarbonate (PC) resin Approx. 650 g (with 10-m cable) 5 m, 10 m 1-kbyte memory 2-, 8-, 32-kbyte memory Note 1. When connected to the V680-HS63-R or V680-HS52-R. 2. When connected to the V680-HS63-W or V680-HS52-W. (Not including the Connector on the Controller.) 3. For details, refer to the User's Manual (Cat. No. Z248 or Z262). V680 Series RFID System 15 Controller Item Model Power supply voltage (Power consumption) Communications Specifications Input Specifications (Input voltage) RST, TRG1, and TRG2 Output Specifications (Maximum switching capacity) RUN, BUSY/OUTS, ERROR/OUT4, OUT1, and OUT2 Ambient operating temperature Ambient storage temperature Ambient operating humidity Insulation resistance Dielectric strength Degree of protection Vibration resistance V680-CA5D01-V2 V680-CA5D02-V2 24 VDC (15% to +10%) 15 W max., 0.8 A max. RS-232C, RS-422, RS-485 24 VDC (+10% to 15%, including ripple) (PNP and NPN compatible) 24 VDC (+10% to 15%, including ripple) 100-mA photoMOS output (PNP and NPN compatible) 10 to 55qC (with no icing) 25 to 65qC (with no icing) 25% to 85% (with no condensation) 20 M: min. (at 500 VDC) applied as follows: (1) Between power supply terminals and grounded case (2) Between ground and terminals 1,000 VAC (50/60 Hz) for 1 minute (1) Between power supply terminals and grounded case (2) Between ground and terminals Panel mounted (equivalent to IP20) 10 to 150 Hz variable vibration, 0.2-mm double amplitude at 15 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each Shock resistance 150 m/s2 105 u 90 u 65 mm (not including projections) Polycarbonate (PC) resin, ABS resin Approx. 300 g 1 2 Appearance Material Weight Connectable Amplifier Units Note: For details, refer to the User's Manual (Cat. No. Z249). USB Port The USB port is used for a simple connection with a personal computer using a USB cable. The port complies with USB 1.1, and the USB cable uses a series A or series mini-B connector. A USB port driver must be separately provided. Consult with your OMRON representative for details. When connected to a host device via USB, the communications will use 1:1 protocol regardless of the setting of DIP switches 3 to 9. The USB port is not used for control purposes. When building a system, be sure to provide an RS-232C port or RS-422/RS-485C port. ID Sensor Units Item Model Current Internal: 5 V consumption Internal: 24 V/26 V External: 24 V CJ1W-V680C11 CJ1W-V680C12 CS1W-V680C11 CS1W-V680C12 260 mA 320 mA 260 mA 320 mA 130 mA (See note.) 260 mA 125 mA (See note.) --- --- --- --- 360 mA Ambient operating temperature 0 to 55qC Ambient storage temperature 20 to 75qC Ambient operating humidity 10% to 90% (with no condensation) Insulation resistance 20 m: min. at 500 VDC Dielectric strength 1,000 VAC for 1 minute Degree of protection Mounted in panel (IP30) Vibration resistance 10 to 57 Hz variable vibration, 0.075-mm double amplitude and 57 to 150 Hz variable vibration at 9.8 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each Shock resistance 147 m/s2 in X, Y, and Z directions 3 times each Appearance 31 u 65 u 90 mm (excluding protrusions) Note: When connected to the V680-H01: 280 mA 16 V680 Series RFID System 35 u 130 u 101 mm (excluding protrusions) Functional Specifications of ID Sensor Units Item Model Communications control protocol CJ1W-V680C11 CJ1W-V680C12 CS1W-V680C11 CS1W-V680C12 Special protocol for CS1 and CJ1 PLCs Number of Read/Write Head 1 connections 2 1 2 Commands Supported commands: Read, Write, Bit Set/Bit Clear, Mask Bit Write, Calculation Write, Data Fill, Data Check, Number of Writes Control, Copy, Read with Error Correction/Write with Error Correction, UID Read, and Noise Measurement. The following communications options are supported: Single trigger, Single auto, Repeat auto, FIFO trigger, FIFO repeat (See note.), Multi-access trigger, and Multi-access repeat (See note.) Data transfer quantity 2,048 bytes max. (160 bytes/scan) Diagnostic function (1) CPU watchdog timer (2) Communications error detection with ID Tag (3) Antenna power supply error Monitoring/testing functions Tag communications can be tested in Test Mode. Status is displayed by LED indicators. Number of allocated words 10 words 20 words 10 words 20 words Note 1. Cannot be used for communications with the V680-D1KP@@. 2. For details, refer to the User's Manual (Cat. No. Z271). Handheld Reader Writers Item Model V680-CHUD 0.8M V680-CHUD 1.9M Power supply voltage 5 VDC5% Current consumption 500 mA max. (for a power supply voltage of 5.0 V) Communications specifications USB (Series A plug) Ver.1.1 Ambient operating temperature during communication 0 to +40qC Ambient storage temperature 25 to +65qC V680-CH1D RS-232C (D-SUB 9-pin) (compatible with IBM PC/AT) V680-CH1D-PSI RS-232C (D-SUB 9-pin) Ambient operating humidity 35% to 85% (with no condensation) during communication Insulation resistance 50 M: min. (at 500 VDC) between connector and case Dielectric strength 1,000 VAC, 50/60 Hz for 1 min (leakage current: 1 mA max.) between connectors and case Degree of protection IEC 60529: IP63 (See note 2.) Vibration resistance Destruction: 10 to 150 Hz, 0.2-mm double amplitude, with 10 sweeps for 8 min each in 6 directions Shock resistance Destruction: 150 m/s2, 3 times each in X, Y, and Z directions Weight Approx. 110 g (including connector and cable) Approx. 140 g (including connector and cable) Approx. 170 g (including connector and cable) Approx. 120 g (including connector and cable) Cable length 0.8 m 1.9 m 2.5 m 0.8 m Note 1. Refer to the User's Manual (Cat. No. Z272) for details. 2. This does not include the connector section. The main unit is not resistant to chemical or oils. AC Adapter (for V680-CH1D) Item Model V600-A22 Input voltage 100 to 120 VAC at 50/60 Hz Input current 100 VAC: 200 mA 20%, 120 VAC: 170 mA 20% Output voltage 5 VDC 0.25 V Ambient operating temperature 0 to 40qC (with no icing) Ambient storage temperature 40 to 70qC (with no icing) Ambient operating humidity 25% to 85% (with no condensation) Insulation resistance 100 M: min. (at 500 VDC) between input terminals and output terminals Dielectric strength 1,500 V for 1 minute between input terminals and output terminals with a current leakage of 5 mA max. Weight Approx. 85 g Applicable standards UL/CSA V680 Series RFID System 17 Performance Specifications ID Tag (1-kbyte Memory) Transmission Recommended combination ID Tag V680-D1KP52MT Function Read/Write Antenna V680-HS52 Transmission distance (unit: mm) Read distance 0 to 9.0 mm (axial deviation r2) Write distance 0 to 8.5 mm (axial deviation r2) ID Tag and Read/Write Antenna mounting conditions V680-D1KP52MT V680-HS52 Non-metallic (Resin, plastic, wood, etc.) Non-metallic V680-HS51 Read distance 0.5 to 6.5 mm (axial deviation r2) Write distance 0.5 to 6.0 mm (axial deviation r2) V680-D1KP52MT Non-metallic (Resin, plastic, wood, etc.) V680HS51 Metallic V680-D1KP52MT (embedded in metallic surface: steel) V680-HS52 Read distance 0 to 4.5 mm (axial deviation r2) Write distance 0 to 4.0 mm (axial deviation r2) Metallic V680-HS52 V680-D1KP52MT Non-metallic V680-HS51 Read distance Write distance 0.5 to 3.5 mm (axial deviation r2) 0.5 to 3.5 mm (axial deviation r2) Metallic V680HS51 Metallic V680-D1KP52MT V680-D1KP52MT V680-HS63 Read distance 0 to 12.0 mm (axial deviation r2) Write distance 0 to 9.5 mm (axial deviation r2) Read distance 0 to 9.0 mm (axial deviation r2) V680-HS63 Non-metallic (Resin, plastic, wood, etc.) V680D1KP52MT Non-metallic V680-D1KP53M V680-HS52 Write distance 0 to 8.5 mm (axial deviation r2) Read distance 0.5 to 6.5 mm (axial deviation r2) Write distance 0.5 to 6.0 mm (axial deviation r2) V680-D1KP53M V680HS52 Non-metallic (Resin, plastic, wood, etc.) Non-metalli V680-HS51 V680-D1KP53M V680HS51 Non-metallic (Resin, plastic, wood, etc.) Metallic V680-D1KP53M (embedded in metallic surface : steel) V680-HS52 Read distance Write distance V680-HS51 Read distance Write distance 0 to 4.5 mm (axial deviation r2) (See note.) 0 to 4.0mm (axial deviation r2) (See note.) Metallic V680HS52 Non-metallic V680-D1KP53M 0.5 to 3.5 mm (axial deviation r2) (See note.) 0.5 to 3.0 mm (axial deviation r2) (See note.) Metallic V680HS51 Metallic V680-D1KP53M Note: When using the V680-D1KP53M embedded in metal, use the V680-HS51/-HS52 Antenna. Communications will not be possible with a V680HS63 Antenna. 18 V680 Series RFID System Recommended combination ID Tag Read/Write Antenna V680-D1KP54T V680-HS52 Function Transmission distance (unit: mm) Read distance 0 to 17.0 mm (axial deviation r2) Write distance 0 to 15.0 mm (axial deviation r2) Read distance 0 to 24.0 mm (axial deviation r10) Write distance 0 to 20.0 mm (axial deviation r10) ID Tag and Read/Write Antenna mounting conditions V680-D1KP54T Non-metallic (Resin, plastic, wood, etc.) V680HS52 Non-metallic V680-HS63 V680-HS63 Non-metallic (Resin, plastic, wood, etc.) V680-D1KP54T Non-metallic V680-HS65 Read distance 0 to 33.0 mm (axial deviation r10) Write distance 0 to 28.0 mm (axial deviation r10) V680-HS65 Non-metallic (Resin, plastic, wood, etc.) V680-D1KP54T Metallic V680-D1KP66T V680-HS52 Read distance 0 to 17.0 mm (axial deviation r2) (See note 2.) Write distance 0 to 17.0 mm (axial deviation r2) (See note 2.) V680-D1KP66T V680-HS52 Non-metallic (Resin, plastic, wood, etc.) Non-metallic V680-HS63 Read distance 0 to 30.0 mm (axial deviation r10) (See note 2.) Write distance 0 to 25.0 mm (axial deviation r10) (See note 2.) Read distance 0 to 47.0 mm (axial deviation r10) (See note 2.) Write distance 0 to 42.0 mm (axial deviation r10) (See note 2.) V680-HS63 Non-metallic (Resin, plastic, wood, etc.) V680D1KP66T Non-metallic V680-HS65 V680-HS65 Non-metallic (Resin, plastic, wood, etc.) Metallic V680-H01-V2 Read distance 0 to 100.0mm (axial deviation r10) Write distance 0 to 100.0 mm (axial deviation r10) V680D1KP66T V680-H01-V2 V680-D1KP66T Non-metallic Non-metallic Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 x 100 mm). For details, refer to the User's Manual (Cat. No. Z248 or Z262). 2. The transmission distance may be reduced if the V680-D1KP66T is mounted onto a metallic surface. Refer to theUser's Manual (Cat. No. Z262) for details. V680 Series RFID System 19 Recommended combination ID Tag V680-D1KP66MT (flush-mounted on metallic surface: steel) Function Read/Write Antenna V680-HS52 Transmission distance (unit: mm) Read distance 0 to 16.0 mm (axial deviation r2) Write distance 0 to 14.0 mm (axial deviation r2) Read distance 0 to 25.0 mm (axial deviation r10) Write distance 0 to 20.0 mm (axial deviation r10) Read distance 0 to 25.0 mm (axial deviation r10) ID Tag and Read/Write Antenna mounting conditions V680-D1KP66MT V680-HS52 Non-metallic V680-HS63 Metallic V680-HS63 Metallic V680D1KP66MT Non-metallic V680-HS65 Write distance V680-HS65 Metallic 0 to 20.0 mm (axial deviation r10) V680D1KP66MT Metallic V680-D1KP66T-SP V680-HS52 Read distance 0 to 17.0 mm (axial deviation r2) V680-D1KP66T-SP Non-metallic (Resin, plastic, wood, etc.) Write distance V680HS52 0 to 17.0 mm (axial deviation r2) Non-metallic V680-HS63 Read distance 0 to 30.0 mm (axial deviation r10) V680-HS63 Non-metallic (Resin, plastic, wood, etc.) Write distance 0 to 25.0 mm (axial deviation r10) V680D1KP66T-SP Non-metallic V680-HS65 Read distance 0 to 47.0 mm (axial deviation r10) V680-HS65 Non-metallic (Resin, plastic, wood, etc.) Write distance 0 to 42.0 mm (axial deviation r10) V680D1KP66T-SP Metallic V680-D1KP58HT V680-H01-V2 Read distance 0 to 150 mm (See note 2.) V680-H01-V2 V680-D1KP58HT Write distance Non-metallic (Resin, plastic, wood, etc.) Non-metallic Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 x 100 mm). For details, refer to the User's Manual (Cat. No. Z248 or Z262). 2. The transmission distance may be reduced if the V680-D1KP58HT is mounted onto a metallic surface. Refer to theUser's Manual (Cat. No. Z262) for details. 20 V680 Series RFID System ID Tag (2-kbyte Memory) Transmission Recommended combination ID Tag V680-D2KF52M Function Read/Write Antenna V680-HS52 Transmission distance (unit: mm) Read distance 0 to 8.0 mm (axial deviation r2) Write distance 0 to 8.0 mm (axial deviation r2) ID Tag and Read/Write Antenna mounting conditions V680-D2KF52M V680-HS52 Non-metallic (Resin, plastic, wood, etc.) Non-metallic V680-HS51 Read distance 0.5 to 5.5 mm (axial deviation r2) V680-D2KF52M Non-metallic (Resin, plastic, wood, etc.) Write distance V680HS51 0.5 to 5.5 mm (axial deviation r2) Metallic V680-D2KF52M (embedded in metallic surface: steel) V680-HS52 Read distance 0 to 3.0 mm (axial deviation r2) Write distance 0 to 3.0 mm (axial deviation r2) Metallic V680-HS52 Non-metallic V680-HS51 Read distance V680-D2KF52M 0 to 3.5 mm (axial deviation r2) Metallic V680HS51 Write distance 0 to 3.5 mm (axial deviation r2) Read distance 0 to 9.5 mm (axial deviation r2) Write distance 0 to 9.5 mm (axial deviation r2) Read distance 0 to 17.0 mm (axial deviation r2) (See note.) Write distance 0 to 17.0 mm (axial deviation r2) (See note.) Metallic V680-D2KF52M V680-D2KF52M V680-HS63 V680-HS63 Non-metallic (Resin, plastic, wood, etc.) V680D2KF52M Non-metallic V680-D2KF67 V680-HS52 V680-D2KF67 V680-HS52 V680-HS63 Read distance 7 to 30.0 mm (axial deviation r10) (See note.) Write distance 7 to 30.0 mm (axial deviation r10) (See note.) Read distance 0 to 42.0 mm (axial deviation r10) (See note.) Write distance 0 to 42.0 mm (axial deviation r10) (See note.) Read distance 0 to 100.0 mm (axial deviation r10) Write distance 0 to 100.0 mm (axial deviation r10) Non-metallic Non-metallic (Resin, plastic, wood, etc.) V680-HS63 Non-metallic (Resin, plastic, wood, etc.) V680D2KF67 Non-metallic V680-HS65 V680-HS65 Non-metallic (Resin, plastic, wood, etc.) V680D2KF67 Metallic V680-H01-V2 V680-H01-V2 V680-D2KF67 Non-metallic Non-metallic Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 x 100 mm). For details, refer to the User's Manual (Cat. No. Z248 or Z262). 2. The transmission distance may be reduced if the V680-D2KF67 is mounted onto a metallic surface. Refer to theUser's Manual (Cat. No. Z248) for details. V680 Series RFID System 21 Recommended combination ID Tag Function Read/Write Antenna V680-D2KF67M (flush- V680-HS52 mounted on metallic surface: steel) Read distance Transmission distance (unit: mm) ID Tag and Read/Write Antenna mounting conditions 0 to 16.0 mm (axial deviation r2) V680-D2KF67M Metallic Write distance V680-HS52 0 to 16.0 mm (axial deviation r2) Non-metallic V680-HS63 Read distance 6 to 25.0 mm (axial deviation r10) Write distance 6 to 25.0 mm (axial deviation r10) Read distance 0 to 25.0 mm (axial deviation r10) Write distance 0 to 25.0 mm (axial deviation r10) Iron V680-HS63 Metallic V680D2KF67M Non-metallic V680-HS65 V680-HS65 Metallic V680D2KF67M Metallic Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 x 100 mm). For details, refer to the User's Manual (Cat. No. Z248 or Z262). ID Tag (8-/32-kbyte Memory) Transmission Recommended combination ID Tag V680-D8KF67 Function Read/Write Antenna V680-HS52 Read distance Transmission distance (unit: mm) ID Tag and Read/Write Antenna mounting conditions 0 to 17.0 mm (axial deviation r2) V680-D8KF67 Non-metallic (Resin, plastic, wood, etc.) Write distance V680HS52 0 to 17.0 mm (axial deviation r2) Non-metallic V680-HS63 Read distance 0 to 30.0 mm (axial deviation r10) V680-HS63 Non-metallic (Resin, plastic, wood, etc.) Write distance 0 to 30.0 mm (axial deviation r10) V680D8KF67 Non-metallic V680-HS65 Read distance 0 to 42.0 mm (axial deviation r10) V680-HS65 Non-metallic (Resin, plastic, wood, etc.) Write distance 0 to 42.0 mm (axial deviation r10) Read distance 0 to 100.0 mm (axial deviation r10) Write distance 0 to 100.0 mm (axial deviation r10) V680D8KF67 Metallic V680-H01-V2 V680-H01-V2 V680-D8KF67 Non-metallic Non-metallic Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 x 100 mm). For details, refer to the User's Manual (Cat. No. Z248 or Z262). 22 V680 Series RFID System Recommended combination ID Tag Function Read/Write Antenna V680-D8KF67M (flush- V680-HS52 mounted on metallic surface: steel) Transmission distance (unit: mm) Read distance 0 to 16.0 mm (axial deviation r2) Write distance 0 to 16.0 mm (axial deviation r2) ID Tag and Read/Write Antenna mounting conditions V680-D8KF67M Metallic V680HS52 Non-metallic V680-HS63 Read distance 0 to 25.0 mm (axial deviation r10) V680-HS63 Metallic Write distance 0 to 25.0 mm (axial deviation r10) Read distance 0 to 25.0 mm (axial deviation r10) V680D8KF67M Non-metallic V680-HS65 V680-HS65 Metallic Write distance 0 to 25.0 mm (axial deviation r10) V680D8KF67M Metallic V680-D8KF68/ -D32KF68 V680-HS63 Read distance 0 to 45.0 mm (axial deviation r10) (See note 2.) Write distance 0 to 45.0 mm (axial deviation r10) (See note 2.) V680-HS63 Non-metallic (Resin, plastic, wood, etc.) V680D@KF68 Metallic V680-HS65 Read distance Write distance 0 to 75.0 mm (axial deviation r10) (See note 2.) V680-HS65 Non-metallic (Resin, plastic, wood, etc.) 0 to 75.0 mm (axial deviation r10) (See note 2.) V680D@KF68 Metallic V680-H01-V2 Read distance 0 to 150.0 mm (axial deviation r10) Write distance 0 to 150.0 mm (axial deviation r10) V680-H01-V2 V680-D8KF68/-D32KF68 Non-metallic Non-metallic Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 x 100 mm). For details, refer to the User's Manual (Cat. No. Z248 or Z262). 2. The transmission distance may be reduced if the V680-D@KF68 is mounted onto a metallic surface. Refer to the User's Manual (Cat. No. Z248) for details. V680 Series RFID System 23 Recommended combination ID Tag Function Transmission distance (unit: mm) Read/Write Antenna V680-D8KF68/ V680-HS63 -D32KF68 (Special attachment provided; flush-mounted on metallic surface: steel) Read distance ID Tag and Read/Write Antenna mounting conditions 0 to 35.0 mm (axial deviation r10) V680-A81 (ID Tag Attachment) V680-HS63 Metallic Write distance 0 to 35.0 mm (axial deviation r10) V680D@KF68 Metallic V680-HS65 Read distance 0 to 55.0 mm (axial deviation r10) V680-A81 (ID Tag Attachment) V680-HS65 Metallic Write distance 0 to 55.0 mm (axial deviation r10) V680D@KF68 Metallic Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 x 100 mm). For details, refer to the User's Manual (Cat. No. Z248 or Z262). 2. The transmission distance may be reduced if the V680-D@KF68 is mounted onto a metallic surface. Use V680-A81 special attachment. Refer to the User's Manual (Cat. No. Z248) for details. Characteristic Data (Typical) Transmission Range (unit: mm) 1-kbyte Memory ID Tag The values given for communications ranges are reference values. Refer to pages 18 to 20 for communications distance specifications. The communications distance will depend on the ID Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system. V680-HS52 (embedded in non-metallic material) & V680-D1KP52MT (embedded in non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP52MT (embedded in metallic surface: steel) Write Read Y Y 50 40 X 30 -40 -30 -20 20 10 10 0 10 20 30 40 X V680-HS51 (embedded in metallic material) & V680-D1KP52MT (embedded in non-metallic material) -50 -40 -30 -20 -10 24 40 X Write Y Y 50 40 20 20 10 10 0 10 20 30 V680 Series RFID System X 30 X 30 -10 30 Read 40 -20 20 Y 50 -30 10 Write Read -40 0 V680-HS51 (embedded in metallic material) & V680-D1KP52MT (embedded in metallic surface: steel) Y -50 X 30 20 -10 Y 50 40 -50 Write Read Y 40 X -50 -40 -30 -20 -10 0 10 20 30 40 X V680-HS63 (mounted on non-metallic material) & V680-D1KP52MT (embedded in non-metallic material) Write Read Y Y 50 40 X 30 20 10 -50 -40 -30 -20 -10 0 10 20 30 40 X V680-HS51 (embedded in metallic material) & V680-D1KP53M (embedded in non-metallic material) Write Read -50 -40 -30 -20 V680-HS51 (embedded in metallic material) & V680-D1KP53M (embedded in metallic surface: steel) Y 50 50 40 40 30 30 20 20 10 10 -10 0 10 20 30 40 X V680-HS52 (embedded in non-metallic material) & V680-D1KP53M (embedded in non-metallic material) -50 -40 -30 -20 -50 -40 -30 -20 -10 0 Y 50 50 40 40 30 30 20 20 10 10 0 10 20 20 30 30 40 X V680-HS52 (embedded in non-metallic material) & V680-D1KP54T (mounted on non-metallic material) X Write -50 -40 -30 -20 -10 0 10 20 30 40 X V680-HS63 (mounted on non-metallic material) & V680-D1KP54T (mounted on non-metallic material) Write Read 40 Read Y -10 10 V680-HS52 (embedded in non-metallic material) & V680-D1KP53M (embedded in metallic surface: steel) Write Read Write Read Y Write Read Y Y 25 30 20 20 15 10 10 5 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 X -40 -30 -20 -10 0 10 20 30 X V680-HS65 (mounted on metallic material) & V680-D1KP54T (mounted on non-metallic material) Read Write Y 60 50 40 30 20 10 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 X V680 Series RFID System 25 V680-HS52 (embedded in non-metallic material) & V680-D1KP66T (mounted on non-metallic material) V680-HS63 (mounted on non-metallic material) & V680-D1KP66T (mounted on non-metallic material) Write Read Y Y 50 40 X 30 -40 -30 -20 Y 50 40 -50 Write Read Y 20 20 10 10 -10 0 10 20 30 X 30 40 X V680-HS65 (mounted on metallic material) & V680-D1KP66T (mounted on non-metallic material) Read -50 -40 -30 -20 -10 0 10 20 30 X 40 V680-H01-V2 (mounted on non-metallic material) & V680-D1KP66T (mounted on non-metallic material) Write Read Write Y Y 100 200 Y 80 150 60 X 100 40 50 20 -100 -80 -60 -40 -20 0 20 40 60 X 80 V680-HS52 (embedded in non-metallic material) & V680-D1KP66T-SP (embedded in non-metallic material) -250 -200 -150 -100 -50 0 50 100 Write Read 150 200 Y 50 Y 50 Y 40 40 X -40 -30 -20 -10 X 30 30 20 20 10 10 0 10 20 30 40 X V680-HS65 (mounted on metallic material) & V680-D1KP66T-SP (mounted on non-metallic material) 26 -80 -60 -40 -20 -50 -40 -30 -20 -10 0 Y 100 50 80 40 60 30 40 20 20 10 20 40 60 V680 Series RFID System 20 80 30 40 X X Write Read Y 0 10 V680-HS52 (embedded in non-metallic material) & V680-D1KP66MT (mounted on metallic surface: steel) Write Read -100 Write Read Y -50 X V680-HS63 (mounted on non-metallic material) & V680-D1KP66T-SP (mounted on non-metallic material) -50 -40 -30 -20 -10 Y X 0 10 20 30 40 X V680-HS63 (mounted on non-metallic material) & V680-D1KP66MT (mounted on metallic surface: steel) V680-HS65 (mounted on metallic material) & V680-D1K66MT (mounted on metallic surface: steel) Read Write Read Y 50 100 80 40 X 30 -50 -40 -30 -20 60 20 40 10 20 -10 Write Y Y 0 10 20 30 40 X -100 -80 -60 -20 -40 20 0 40 60 X 80 V680-H01-V2 (mounted on non-metallic material) & V680-D1KP58HT (mounted on non-metallic material) Write Read Y 200 Y 150 X Tag V680-H01 100 50 -250 -200 -150 -100 -50 50 0 100 150 200 X 2-kbyte Memory ID Tag The values given for communications ranges are reference values. Refer to pages 21 to 22 for communications distance specifications. The communications distance will depend on the ID Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system. V680-HS52 (embedded in non-metallic material) & V680-D2KF52M (embedded in non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D2KF52M (embedded in metallic surface: steel) Write Read Y 60 60 Y 50 40 X 30 -50 -40 -30 -20 20 20 10 0 10 20 30 40 50 60 X V680-HS51 (embedded in metallic material) & V680-D2KF52M (embedded in non-metallic material) -70 -60 -50 -40 -30 -20 -10 Y 40 50 60 X Write Y 50 40 30 -10 30 Read 40 -20 20 Y 50 -30 10 Write Read -40 0 V680-HS51 (embedded in metallic material) & V680-D2KF52M (embedded in metallic surface: steel) Y -50 X 30 10 -10 Y 50 40 -70 -60 Write Read Y 30 X 20 20 10 10 0 10 20 30 40 X -50 -40 -30 -20 -10 X 0 10 20 30 V680 Series RFID System 40 X 27 V680-HS63 (mounted on non-metallic material) & V680-D2KF52M (embedded in non-metallic material) V680-HS52 (embedded in metallic material) & V680-D2KF67 (mounted on non-metallic material) Y 60 60 Y 50 Y 50 40 40 X X -70 -60 -50 -40 -30 -20 30 30 20 20 10 10 -10 Write Read Write Read Y 0 10 20 30 40 50 60 X V680-HS63 (mounted on non-metallic material) & V680-D2KF67 (mounted on non-metallic material) -70 -60 -50 -40 -30 -20 -10 10 20 30 40 50 60 X Write Read Write Read Y 90 Y Y 60 0 V680-HS65 (mounted on metallic material) & V680-D2KF67 (mounted on non-metallic material) 80 50 70 60 40 X 50 30 40 20 30 20 10 -70 -60 -50 -40 -30 -20 -10 10 0 10 20 30 40 50 60 X -100 -80 -60 -20 -40 20 0 40 60 X 80 V680-H01-V2 (mounted on non-metallic material) & V680-D2KF67 (mounted on non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D2KF67M (mounted on metallic surface: steel) Y Y Write Read 60 Y 200 50 150 40 X 30 100 20 50 10 -250 -200 -150 -100 -50 0 50 100 150 200 X V680-HS63 (mounted on non-metallic material) & V680-D2KF67M (mounted on metallic surface: steel) -70 -60 -50 -40 -30 -20 -10 10 20 30 40 50 60 Read Write Read X Write Y 90 Y Y 60 0 V680-HS65 (mounted on metallic material) & V680-D2KF67M (mounted on metallic surface: steel) 80 50 70 60 40 X 50 30 40 30 20 20 10 -70 -60 28 -50 -40 -30 -20 -10 10 0 10 20 30 40 V680 Series RFID System 50 60 X -100 -80 -60 -40 -20 0 20 40 60 80 X 8-/32-kbyte Memory ID Tag The values given for communications ranges are reference values. Refer to page 22 to 24 for communications distance specifications. The communications distance will depend on the ID Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system. V680-HS52 (embedded in non-metallic material) & V680-D8KF67 (mounted on non-metallic material) Write Read -70 -60 -50 -40 -30 -20 V680-HS63 (mounted on non-metallic material) & V680-D8KF67 (mounted on non-metallic material) Y 60 60 50 50 40 40 30 30 20 20 10 10 -10 0 10 20 30 40 50 60 X V680-HS65 (mounted on metallic material) & V680-D8KF67 (mounted on non-metallic material) Read Write Read Y -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 X V680-H01-V2 (mounted on non-metallic material) & V680-D8KF67 (mounted on non-metallic material) Write Y 90 Y 80 200 70 150 60 50 100 40 30 50 20 10 -100 -80 -60 -40 -20 0 20 40 60 X 80 V680-HS52 (embedded in non-metallic material) & V680-D8KF67M (mounted on metallic surface: steel) -50 -40 -30 -20 -200 -150 -100 -50 0 Y 60 60 50 50 40 40 30 30 20 20 10 10 0 10 20 30 40 100 50 150 200 X 60 Write Read Y -10 50 V680-HS63 (mounted on non-metallic material) & V680-D8KF67M (mounted on metallic surface: steel) Write Read -70 -60 -250 X -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 X V680-HS65 (mounted on metallic material) & V680-D8KF67M (mounted on metallic surface: steel) Read Write Y 90 80 70 60 50 40 30 20 10 -100 -80 -60 -40 -20 0 20 40 60 80 X V680 Series RFID System 29 V680-HS63 (mounted on metallic material) & V680-D8KF68/-D32KF68 (mounted on non-metallic material) (Horizontal-facing ID Tag) Write Read Y 70 V680-HS63 (mounted on metallic material) & V680-D8KF68/-D32KF68 (mounted on non-metallic material) (Vertical-facing ID Tag) Y 60 50 X 40 40 30 30 20 20 10 10 0 10 20 30 40 50 60 70 X V680-HS63 (mounted on metallic material) & V680-D8KF68/ -D32KF68 Mounted on metallic surface: steel (Horizontal-facing ID Tag) When the V680-A81 ID Tag Attachment is mounted. -80 -70 -60 -50 -40 -30 -20 -10 -20 40 30 30 20 20 10 10 0 10 20 30 40 50 60 70 X 30 -40 -20 0 70 X Write -30 -20 -10 20 40 60 60 20 30 40 80 100 80 120 X V680 Series RFID System 70 X Write -120 -100 -80 -60 -40 -20 0 X 20 40 60 80 100 120 X V680-HS65 (mounted on metallic material) & V680-D8KF68/-D32KF68 Flush-mounted on metallic surface: steel (Vertical-facing ID Tag) When the V680-A81 ID Tag Attachment is mounted. Read Y 110 100 90 80 70 60 50 40 30 20 10 120 X 60 Y Write 100 50 Read X 40 10 Y 110 100 90 80 70 60 50 40 30 20 10 Y 20 0 V680-HS65 (mounted on metallic material) & V680-D8KF68/-D32KF68 (Vertical-facing ID Tag) X Read -60 -80 -70 -60 -50 -40 Y Y 110 100 90 80 70 60 50 40 30 20 10 -80 60 Y Write V680-HS65 (mounted on metallic material) & V680-D8KF68/-D32KF68 Flush-mounted on metallic surface: steel (Horizontal-facing ID Tag) When the V680A81 ID Tag Attachment is mounted. -120 -100 50 X 40 0 40 50 X Read -40 30 60 Y 110 100 90 80 70 60 50 40 30 20 10 -60 20 Read V680-HS65 (mounted on metallic material) & V680-D8KF68/-D32KF68 (Horizontal-facing ID Tag) -80 10 Y 70 Y 50 -120 -100 0 V680-HS63 (mounted on metallic material) & V680-D8KF68/ -D32KF68 Mounted on metallic surface: steel (Vertical-facing ID Tag) When the V680-A81 ID Tag Attachment is mounted. 60 -40 -30 -20 -10 X Write Read Y 70 -80 -70 -60 -50 Y 60 50 -80 -70 -60 -50 -40 -30 -20 -10 Write Read Y 70 -120 -100 -80 -60 -40 -20 0 Write Y X 20 40 60 80 100 120 X V680-H01-V2 (mounted on non-metallic material) & V680-D8KF68/-D32KF68 (Horizontal-facing ID Tag) V680-H01-V2 (mounted on non-metallic material) & V680-D8KF68/-32KF68 (Vertical-facing ID Tag) Y Y 200 200 150 150 100 100 50 50 -250 -200 -150 -100 -50 0 50 100 150 200 X -250 -200 -150 -100 -50 0 50 100 150 V680 Series RFID System 200 X 31 Communications Time Communications Time between Antennas and Tags 1-kbyte Memory ID Tag Transmission speed: Normal mode Transmission speed: High-speed mode Transmission time (ms) Transmission time (ms) V680-D1KP@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63A Amplifier Unit) V680-D1KP58HT (used in combination with the V680-H01 Read/Write Antenna) 2,500 2,000 Write (verify enabled) Write (verify disabled) 1,500 2,000 Controller or Command Write ID Sensor Unit verification transmission setting speed setting 1,800 1,600 Write (verify enabled) 1,400 Write (verify disabled) 1,200 1,000 1,000 Read --- T = 1.3N + 31 Write Enabled T = 2.1N + 58 800 High-speed mode (See notes 1 and 2.) 600 500 400 Read Read 200 0 Normal mode 200 400 600 800 1,000 1,200 0 200 400 600 800 1,000 Bytes 1,200 Bytes Transmission time (ms) N = Number of processing bytes Read Write Disabled T = 1.8N + 56 --- T = 1.0N + 29 Enabled T = 1.8N + 51 Disabled T = 1.5N + 47 Note 1. The V680-H01 Read/Write Antenna cannot be used in high-speed mode. 2. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode. 2-kbyte Memory ID Tag V680-D2KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit) Transmission speed: High-speed mode 5,000 4,500 4,000 3,500 Write (verify enabled) 3,000 Write (verify disabled) 2,500 Transmission time (ms) Transmission time (ms) Transmission speed: Normal mode 4,000 Controller or Command Write Transmission ID Sensor Unit verification time (ms) transmission setting N = Number of speed setting processing bytes 3,500 3,000 Write (verify enabled) 2,500 Normal mode Write (verify disabled) 2,000 2,000 1,500 Read 1,500 High-speed mode (See note.) Read 1,000 1,000 --- T = 1.2N + 30 Write Enabled T = 2.4N + 49 Read Write 500 500 0 Read 500 1,000 1,500 2,000 2,500 0 500 1,000 1,500 2,000 2,500 Bytes Bytes Disabled T = 1.2N + 49 --- T = 0.9N + 27 Enabled T = 1.7N + 49 Disabled T = 0.9N + 41 Note: When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode. 8-/32-kbyte Memory ID Tag Transmission speed: Normal mode Transmission speed: High-speed mode Transmission time (ms) Transmission time (ms) V680-D8KF@@, V680-D32KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit) 3,500 Write (verify disabled) 3,000 Write (verify enabled) 2,500 2,000 Read 1,500 2,500 Controller or Command Write Transmission ID Sensor Unit verification time (ms) transmission setting N = Number of speed setting processing bytes 2,000 Write (verify enabled) Normal mode Write (verify disabled) 1,500 High-speed mode (See note.) 1,000 Read 1,000 Read --- T = 1.3N + 30 Write Enabled T = 1.6N + 59 Disabled T = 1.3N + 50 Read --- T = 0.8N + 25 Write Enabled T = 1.1N + 41 Disabled T = 0.9N + 40 500 500 0 500 1,000 1,500 2,000 2,500 0 Bytes 32 V680 Series RFID System 500 1,000 1,500 2,000 2,500 Bytes Note: When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode. TAT When Using an ID Controller (Reference Values) TAT (Turn Around Time) TAT refers to the total time required from the point at which a host device (such as a personal computer) starts sending a command until a response is received. TAT = Command send time + ID Tag transmission time + response receipt time Command send time: This is the time required for sending a command from the host device to the Controller. It varies depending on the communications speed and format. For an ordinary command ID Tag transmission time: This is the time required for transmission between the Read/Write Antenna and the ID Tag. Response receipt time: (Command) RDA1 * * * * *CR This is the time required for returning a response from the Controller to the host device. It varies depending on the communications speed and format. ID Tag transmission time RD001234 * * * *CR Response TAT 1-kbyte Memory ID Tag V680-D1KP@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63A Amplifier Unit) V680-D1KP58HT (used in combination with the V680-H01 Read/Write Antenna) Controller or ID Sensor Unit transmission speed setting Normal mode Command Read Write Write verification setting --- Enabled Disabled High-speed mode (See notes 2 and 3.) Read Write --- Enabled Disabled Number of bytes to processed (byte) TAT (ms) (See note 1.) 100 173 256 389 512 747 1,000 1,431 100 280 256 621 512 1,184 1,000 2,258 100 248 256 542 512 1,028 1,000 1,956 100 141 256 310 512 591 1,000 1,129 100 243 256 537 512 1,023 1,000 1,951 100 209 256 456 512 865 1,000 1,647 Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the User's Manual. 2. The V680-H01 Read/Write Antenna cannot be used in high-speed mode. 3. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode. 4. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows: Data length: 8 bits, Stop bits: 1, Parity: Odd. In this example, communications are continuous, with no gaps between characters. 5. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code. V680 Series RFID System 33 2-kbyte Memory ID Tag V680-D2KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit) Controller or ID Sensor Unit transmission speed setting Normal mode Command Read Write Write verification setting --- Enabled Disabled High-speed mode (See note 2.) Read Write --- Enabled Disabled Number of bytes to processed (byte) TAT (ms) (See note 1.) 100 162 256 363 512 695 1,000 1,330 2,000 2,620 100 301 256 689 512 1,328 1,000 2,549 2,000 5,039 100 181 256 382 512 714 1,000 1,349 2,000 2,639 100 132 256 286 512 541 1,000 1,030 2,000 2,020 100 231 256 510 512 970 1,000 1,849 2,000 3,639 100 143 256 297 512 552 1,000 1,041 2,000 2,031 Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the User's Manual. 2. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode. 3. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows: Data length: 8 bits, Stop bits: 1, Parity: Odd. In this example, communications are continuous, with no gaps between characters. 4. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code. 34 V680 Series RFID System 8-/32-kbyte Memory ID Tag V680-D8KF@@, V680-D32KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit) Controller or ID Sensor Unit transmission speed setting Normal mode Command Read Write Write verification setting --- Yes No High-speed mode (See note 2.) Read Write --- Yes No Number of bytes to processed (byte) TAT (ms) (See note 1.) 100 172 256 388 512 746 1,000 1,430 2,000 2,820 100 231 256 494 512 929 1,000 1,759 2,000 3,449 100 192 256 408 512 766 1,000 1,450 2,000 2,840 100 117 256 255 512 485 1,000 925 2,000 1,815 100 163 256 348 512 655 1,000 1,241 2,000 2,431 100 142 256 296 512 551 1,000 1,040 2,000 2,030 Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the User's Manual. 2. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode. 3. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows: Data length: 8 bits, Stop bits: 1, Parity: Odd. In this example, communications are continuous, with no gaps between characters. 4. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code. V680 Series RFID System 35 Safety Precautions WARNING * Do not subject the products to chemicals that adversely affect product materials. * When installing the product, tighten screws to the following torque: Do not use this product as a detection device to protect people. Controller: 1.2 N*m max. ID Sensor Unit: 0.4 N*m V680-HS51 Read/Write Antenna: 6 N*m Note: This catalog is intended only to help select the appropriate product. Be sure to read the User's Manual for usage precautions prior to using the product. Precautions for Safe Use To ensure safety, be sure to follow the following precautions: 1. Do not operate this product in any flammable, explosive, or corrosive gas environment. 2. Do not disassemble, repair, or remodel this product. 3. Tighten the base lock screws and terminal block screws completely. 4. Be sure to use wiring crimp terminals of the specified size. 5. If any cable has a locking mechanism, be sure to check that it has been locked before using it. 6. The DC power supply must be within the specified rating (24 VDC +10%/15%). 7. Do not reverse the power supply connection. 8. Do not insert water, wire, etc., into any of the gaps in the case. Doing so may cause fire or electric shock. 9. Turn OFF the Controller or ID Sensor Unit power before attaching or removing the Read/Write Antenna. 10.In the event that the product exhibits any abnormal condition, immediately stop using the system, turn OFF the power, and contact your OMRON sales representative. 11.Dispose of this product as industrial waste. 12.Be sure to follow any other warnings, cautions, and notices given in this document. Precautions for Correct Use Please observe the following precautions to prevent failure to operate, malfunctions, or undesirable effects on product performance. Installation Site Install the product at a location where: * It is not exposed to corrosive gases, dust, metal chips, or salt. * The ambient operating temperature is within the range stipulated in the specifications. * There are no sudden variations in temperature (no condensation). * The ambient operating humidity is within the range stipulated in the specifications. * No vibration or shock exceeding the values stipulated in the specifications is transmitted directly to the body of the product. * It is not subject to splashing water, oil, or chemical substances. Installation * The product uses the 13.56-MHz frequency band to communicate with ID Tags. Some devices, such as some motors, inverters, and switching power supplies, generate electromagnetic waves (i.e., noise) that can affect communications with ID Tags. If any of these devices are nearby, communications with ID Tags may be affected or ID Tags may be destroyed. If the product is to be used near such devices, check the effects on communications before using the product. * To minimize the general influence of noise, observe the following precautions: 1. Ground any metallic material located around this device to 100 : or less. 2. Keep the product away from high voltage and heavy current. * Do not use products that are not waterproof in misty environments. 36 V680 Series RFID System V680-HS52 Read/Write Antenna: 40 N*m V680-HS63 Read/Write Antenna: 1.2 N*m V680-HS65 Read/Write Antenna: 1.2 N*m (Attach the enclosed Mounting Brackets) V680-D1KP66T/-D1KP66MT: 0.5 N*m V680-D1KP66T-SP: 1.2 N*m V680-D1KP54T: 0.3 to 0.5 N*m V680-D2KF67/-D2KF67M: 0.6 N*m V680-D8KF67/-D8KF67M: 0.6 N*m V680-D8KF68/-D32KF68: 1.2 N*m * When Read/Write Antennas are mounted side-by-side, mutual interference may reduce the transmission performance. Refer to the RFID System Amplifier and Antennas/ID Tags User's Manual to mount them in a way that will prevent mutual interference. Storage Store the product at a location where: * It is not exposed to corrosive gases, dust, metal chips, or salt. * The ambient storage temperature is within the range stipulated in the specifications. * There are no sudden variations in temperature (no condensation). * The ambient storage humidity is within the range stipulated in the specifications. * No vibration or shock exceeding the values stipulated in the specifications is transmitted directly to the body of the product. * It is not subject to splashing water, oil, or chemical substances. Cleaning Do not use thinner, benzene, acetone, or kerosene for cleaning. Using these substances may dissolve the resin material and the case. Dimensions Note: All units are in millimeters unless otherwise indicated. ID Tag V680-D1KP52MT/-D2KF52M V680-D1KP53M V680-D1KP54T 20dia. 16 dia. R0.2 0 dia. 8 -0.1 C0.5 10 dia. 6-R0.8 0 5 -0.1 4.5 1.1 Case material PPS resin Case material PPS resin Filling Epoxy resin Filling Epoxy resin V680-D1KP66T/-D1KP66MT 4-R3 25 0.2 4-R6 Two, 6 dia. 32 34 PPS resin Mounting Hole Dimensions Two, M5 34 Two, 25 0.2 3.5 dia. 25 0.2 32 Two, 5.5 dia. (mounting holes) 34 Two, M3 36.5 34 Case material V680-D1KP66T-SP Mounting Hole Dimensions 4-R4 2.70.1 800.2 25 0.2 3.5 0.1 1.3 Case material 800.2 95 6.5 2.5 max. PPS resin V680-D2KF67/-D2KF67M Case material PFA resin V680-D8KF67/-D8KF67M Mounting Hole Dimensions Mounting Hole Dimensions Two, M3 Two, M3 5.2 8 5.2 8 13.2 13.2 16 16 40+0.1 -0.5 Mounting reference surface 16 40+0.1 -0.5 320.2 Mounting reference surface 16 8 8 16 Two, 3.5-dia. mounting holes 13.2 16 0.2 8 16 Two, 3.5-dia. mounting holes 13.2 8 5.2 320.2 2 4.5 40+0.1 -0.5 Case material PBT resin Filling Epoxy resin 16 8 0.2 8 320.2 2 4.5 40+0.1 -0.5 5.2 Case material PBT resin Filling Epoxy resin V680-D1KP58HT V680-D8KF68/-D32KF68 60 dia. 80 dia. Two, 4.5 dia. mounting holes 320.2 100.2 5 5 14 dia. 10 Mounting Hole Dimensions 10 2-R2 54 44 440.2 Two, M4 760.2 86 10 5 76 Case material PBT resin Filling Epoxy resin Coating PPS resin V680 Series RFID System 37 Read/Write Antenna with Detachable Amplifier Unit V680-HS52-W Two toothed washers Two mounting nuts M22 x 1 35 dia. Insulated cover Operation indicator 30 37 50 14.5 dia. 19.8 dia. 16.5 dia. 16.5 dia. 7 30 5.5-dia. coaxial cable 47.6 50 57 65 Mounting Hole Dimensions 22.5 dia. V680-HS52-R Connector Case material Brass Transmission surface PBT resin Ferrite core Filling Epoxy resin Cable PVC Case material Brass Two toothed washers Two mounting nuts M22 x 1 35 dia. Insulated cover Operation indicator 50 30 20 10 14.5 dia. 19.8 dia. 16.5 dia. 5.3-dia. coaxial cable Ferrite core 16.5 dia. 7 47.6 50 57 65 30 Mounting Hole Dimensions 22.5 dia. V680-HS51 Toothed washer M12 x 1 Two mounting nuts 21 dia. Ferrite core Transmission surface PBT resin Epoxy resin Cable PVC Case material Brass 26.2 (14.5 dia.) (16.8 dia.) Ferrite core 50 25 7 Insulated cover Coaxial cable, 2.9 dia., Standard length: 2 m 24 33 35 Filling Connector 12 9.6 dia. 17 Connector Transmission surface ABS resin Mounting Hole Dimensions 12.5 dia. Filling Epoxy resin Cable PVC 15 V680-HS63-W Insulated cover 30 40 280.1 37 14.5 dia. 5 16.5 dia. 5.5-dia. coaxial cable 16.5 dia. 27 53 Operation indicator 5 50 6 Connector Ferrite core Mounting Hole Dimensions Two, M4 or 4.5 dia. 23 Center of coil 11 V680-HS63-R Case material ABS resin Filling Epoxy resin Cable PVC Case material ABS resin Filling Epoxy resin Cable PVC Case material ABS resin Filling Epoxy resin Cable PVC (gray) Insulated cover 30 20 50 40 280.1 14.5 dia. 5 16.5 dia. 5.3-dia. coaxial cable Ferrite core 16.5 dia. 6 27 5 10 53 Operation indicator Connector Mounting Hole Dimensions Two, M4 or 4.5 dia. 23 11 V680-HS65-W 100 900.2 5 Four, 4.5-dia. (Mounting holes) 50 5 Center of coil Ferrite core Connector Operation indicator 50 25 100 900.2 16.5 dia. 37 14.5 dia. 16.8 dia. Bushing 50 30 5.5-dia. coaxial cable 10 10 14 30 38 20 V680 Series RFID System 11 Insulated cover V680-HS65-R 100 900.2 5 Four, 4.5-dia. (Mounting holes) 50 5 Operation indicator Ferrite core (39.5) 50 25 Connector 16.5 dia. 100 14.5 dia. 16.8 dia. 900.2 Bushing 30 10 50 5.3-dia. coaxial cable Insulated cover 10 14 30 20 Case material ABS resin Filling Epoxy resin Cable PVC (black) 11 Read/Write Antenna with Built-in Amplifier Unit V680-H01-V2 Connector Mounting Hole Dimensions Coil core Transmission surface 1850.2 5.8-dia. vinyl-insulated round cable (2 conductors: 41/0.16 dia., 8 conductors: 17/0.08 dia.) Standard length: 0.5 m 142.5 2350.2 Four, M4 or 4.5 dia. 12 operation indicators (LEDs) Four, 5-dia. (Mounting holes) Ferrite core 200 (25 dia.) 65 50 20 dia. 185 64.8 14 6 30 38 4 mounting brackets (enclosed) Setting switch cover 142.5 235 250 Transmission surface 7.5 (17) 500 +50 0 (45) (1) 40 Case material PC/ASA resin Filling Aluminum Cable PVC 13.5 Amplifier Unit V680-HA63A/-HA63B Operation indicator 13.7 65 18 51 12.8 dia. 9.5 dia. 36 15 dia. 40 25 25 Connector 25 Connector 15 35.6 3.5 5.8-dia. vinyl-insulated round cable (2 conductors: 41/0.16 dia., 8 conductors: 17/0.08 dia.) Case material PC resin Filling Epoxy resin Cable PVC V680 Series RFID System 39 ID Controller V680-CA5D01-V2/-CA5D02-V2 Mounting Hole Dimensions Two, M4 65 800.2 (80) Two, 4.5-dia. (Mounting holes) 105 5 950.2 95 18 90 80 17.5 5 7.5 ID Sensor Units CJ1W-V680C11 CS1W-V680C11 Six operation indicators (140) 123 4.5 2.7 Switches 0 18.1 90 31 1 130 17.3 4.7 2.7 (193) Switches 65 Six operation indicators Connector Connector 101 35 CJ1W-V680C12 CS1W-V680C12 Eight operation indicators (193) 123 Switches (140) Eight operation indicators 2.7 Switches 65 0 4.5 1 130 4.7 90 18.1 25 51 17.3 24.5 Connectors 2.7 3.6 31 Terminals 35 Connectors 8 15 101 With cover mounted: 16.5 Handheld Reader Writer V680-CHUD 45 Operation indicator Activate switch 25.5 23 11 65 160.5 10.5 Dimension L 800 60 1900 60 L 33 23 Case material Antenna Ferrite core 40 V680 Series RFID System 3.8-dia. vinyl-insulated round cable Standard length: 0.8 or 1.9 m ABS resin Nameplate material PET resin V680-CH1D Activate switch Reset button Operation indicator 25.5 23 11 45 65 3.8-dia. vinyl-insulated round cable Standard length: 2.5 m 48 250060 160.5 Antenna 44.9 Ferrite core 10.5 33 23 24.99 32.2 1.8-dia. x 2 vinyl-insulated flat cable Standard length: 0.19 m Connector 20 Connector Case material 19 0 13 dia. ABS resin Nameplate material PET resin 45 V680-CH1D-PSI Activate switch Reset button Operation indicator 25.5 23 11 45 65 3.8-dia. vinyl-insulated round cable Standard length: 2.5 m 48 800 +50 -110 160.5 Antenna 44.9 10.5 33 23 24.99 32.2 Ferrite core Connector Case material ABS resin Nameplate material PET resin AC Adapter V600-A22 45.5 unifibe.com 23.5 33 1800 unifibe.com 9.5 0.3 4.1 dia. Handheld Terminal (Recommended) Recommended Handheld Terminal Psion Teklogix model 7527S-G2-@@-S (V680-A-7527S-G2-@@-S) 100 42 210 V680 Series RFID System 41 Accessories V680-D1KP66T Attachments V600-A86 Holder 4-R5.5 Mounting Hole Dimensions Two, 4-dia. 250.2 Two, M3 37 34 15 250.2 250.2 250.2 4 15 34 37 V680-D8KF68/-D32KF68 Attachments V600-A81 Holder 16 3.5 10 Two, 4.5-dia. mounting holes Case material PPS resin Case material PBT resin Filling Epoxy resin Mounting Hole Dimensions 54 44 440.2 Two, M4 760.2 86 76 10 V680-D1KP58HT Attachments V680-A80 17 Mounting Hole Dimensions 20 dia. 12 dia. M12 M12 3.2 dia. 11.5 15 40 50 110 V680-D1KP54T Attachments V700-A80 40 20-dia + 0.05 Two, 6-dia 22 Two, 3.5-dia 31 0.1 3.5 1.5 58 1 22 Amplifier Unit Special Extension Cable V700-A40 2M. 51 V700-A41 3M. V700-A42 5M. V700-A43 10M. 15 dia V700-A44 20M. V700-A45 30M. Note: The model numbers for each length (L1) are as follows: L1100 (See note.) 49 Model 15.5 dia 6 dia Connector to Amplifier Unit Connector to ID Controller Connection label 2,000 V700-A41 3M. 3,000 V700-A42 5M. 5,000 V700-A43 10M. 10,000 V700-A44 20M. 20,000 V700-A45 30M. 30,000 Material V680-H01 Special Cables V700-A40-W 2M V700-A40-W 5M V700-A40-W 10M V700-A40-W 20M 20 dia. V700-A40-W 30M PVC Note: The model numbers for each length (L1) are as follows: L1 100 (See note.) 41.8 Connector to R/W Head 49 Model V700-A40-W 2M 15.5 dia. 6-dia. vinyl-insulated round cable Connector to ID Controller Connection label V680 Series RFID System Length L1 2,000 V700-A40-W 5M 5,000 V700-A40-W 10M 10,000 V700-A40-W 20M 20,000 V700-A40-W 30M 30,000 Material 42 Length L1 V700-A40 2M. PVC ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies ("Omron"). Omron objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron's payment terms and (ii) Buyer has no past due amounts. 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 7. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in "break down" situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 13. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- 14. 15. 16. 17. 18. ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron247.com or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to "forbidden" or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions. As used herein, "including" means "including without limitation"; and "Omron Companies" (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO 2. 3. 4. 5. ADDRESS THE RISKS, AND THAT THE OMRON'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON ELECTRONICS LLC * THE AMERICAS HEADQUARTERS * Schaumburg, IL USA * 847.843.7900 * 800.556.6766 * www.omron247.com OMRON CANADA, INC. * HEAD OFFICE Toronto, ON, Canada * 416.286.6465 * 866.986.6766 www.omron247.com OMRON ARGENTINA * SALES OFFICE Cono Sur * 54.11.4783.5300 OMRON ELETRONICA DO BRASIL LTDA * HEAD OFFICE Sao Paulo, SP, Brasil * 55.11.2101.6300 * www.omron.com.br OMRON CHILE * SALES OFFICE Santiago * 56.9.9917.3920 OMRON ELECTRONICS MEXICO SA DE CV * HEAD OFFICE Apodaca, N.L. * 52.811.156.99.10 * 001.800.556.6766 * mela@omron.com OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 Omron Europe B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. Tel: +31 (0) 23 568 13 00 Fax: +31 (0) 23 568 13 88 www.industrial.omron.eu Q151-E1-06 04/10 Note: Specifications are subject to change. (c) 2010 Omron Electronics LLC