NEW
V680 Series
RFID System
Next-Generation RFID System
Conforming to ISO/IEC 18000-3
(ISO/IEC 15693).
Visualize data transmission on
production lines.
Managing the manufacture of LCDs
and color filters
Managing dies, die histories,
and die service lives
Managing process instructions
and histories for engine
manufacturing
Managing manufacturing process
traceability
Can be used in many countries around the world.
Conforms to ISO/IEC 18000-3 (ISO/IEC 15693)
High-speed transmission of 27 kbps achieved.
The V680 Series offers data transmission speeds as high as 27 kbps at an operating frequency of 13.56 MHz,
and dramatically shortens turn around time (TAT) with a Self-execution Mode that eliminates the need for host
access.
The V680 Series also supports V600-series commands,
so there is no need to change command systems.
These ultra-compact Tags also feature high environmental durability, long service lives,
and maintenance-free operation.
ID Tags can be either embedded in metal or
mounted on non-metallic objects without requiring
any extra attachments.
A long service life enables 10 billion accesses.
(for tag which Memory type use FRAM)
A new battery-less model with a large, 32-Kbyte
capacity has been added to the line-up.
In addition to managing the growing amount
of production and quality data on today's factory floors,
this new Tag makes it easy to build a system with
traceability.
The V680 Series features the same level of environmental
durability as the previous V600 Series.
Battery-less
Battery-less
Long service life
Long service life
Battery-less
Long service life
10
billion
accesses
Enables High-speed Data Transmission
A Wide Range of ID Tags Available for Various Production Lines
No Changes Needed when Switching from an Existing System
Versatile Functions for Optimal
Use on Production Lines
The V680 Series can be used in many parts of the world because it meets the requirements of radio wave
regulations in Japan, Europe, the U.S.A., Canada, Mexico, Singapore, Malaysia, the Philippines, China, Hong
Kong, Taiwan, and Korea. Contact your OMRON sales representative for details on use in other countries.
Self-execution system
ID Tag
transmission time
Judgment and
instruction
TAT
Conventional system
Host send (command) time Host send (response)
judgment and instruction time
ID Tag
transmission time
Judgment and
instruction
TAT
Easier Startup and Maintenance.
Simpler Operation.
Contributes to higher efficiency for on-site startup and maintenance.
Seven maintenance modes make it easy to diagnose the optimal usage conditions for the V680 RFID System.
Startup is also easier because the system can be checked without having to use a personal computer or other
host device.
Work efficiency is greatly increased because the ID Map Manager includes an ID Tag read/write test function
and communications checking function in addition to memory map definition and editing functions.
Memory map data created by the ID Map Manager can also be easily shared between the production line
design department and the vendors that are building the line.
Using the ID Map Manager dramatically shortens the time required to allocate
ID Tag memory and complete system designs.
Maintenance modes are
quickly switched with
the DIP switch on the
front of the Controller.
The Amplifier Unit is also
equipped with an indicator that
displays the communications
condition, for easy confirmation
from the location nearest the
production line.
V680-A-IMMEG-P01
Lets You Visualize Data Transmission
Strong Support for Creating ID Tag Memory Maps
Distant Close
Little noise Much noise
More than 99 successful
communications
Visualize Data Transmission without the Need for a Host Device.
Perform Simple Diagnosis of Communications Conditions.
Confirms correct mounting positions for the Read/Write Antenna and ID Tag.
The distance between the Read/Write Antenna and ID Tag mounting locations relative to the communications
range is displayed using six levels.
Controller
Controller
Controller
Amplifier Unit
Distance Level Measurement Mode
Confirms spatial noise, noise sources, and noise countermeasure effects.
Measures the ambient noise level and displays it in levels ranging from 00 to 99.
Noise Level Measurement Mode
Confirms the speed of moving ID Tags and the number of usable bytes.
Data is transmitted repeatedly to moving ID Tags, and the number of successful communications and speed
level are displayed in levels ranging from 01 to 99.
(No data is actually written to the ID Tags during the write part of the Speed Level Measurement Mode.)
Speed Level Measurement Mode (Read/Write)
Read/Write
Antenna
Read/Write
Antenna
ID Tag
Movement
Read/Write
Antenna
Distance level “--”
ID Tag
“06”
“05”
“04”
“03”
“02”
“01”
Seven maintenance modes make it easy to diagnose the communications conditions from the front
panel of the Controller or Amplifier Unit. The data can also be output from the USB port of the Controller
to a personal computer or other monitoring device.
(Maintenance Mode cannot be used with the V680-H01 or V680-CH.)
Communications successes: 23
Communications errorNormal communication
Controller
Controller
Confirms the communications success rate between the Read/Write Antenna and ID Tags.
A total of 100 communications are executed without retries, and the rate of communications success is
displayed in levels ranging from 01 to 99.
Confirms communications ability between the Read/Write
Antenna and ID Tags.
The end codes are displayed to show the results of communications
between the Read/Write Antenna and ID Tags. When the Controller
is mounted inside a control panel, or in some other location, this
data can be output from the Controller's USB port and easily
checked on a monitor.
(The Tag Communications Test Mode uses only read operations.)
This mode can be used as a protocol analyzer function for host device communications lines.
The communications commands sent from the host device and the execution result responses can be output
from the USB port of the Controller.
Confirms whether the signals sent from the Controller are being correctly transferred to an external device.
The communications commands and responses between the Controller and a host device are output from the
Controller's USB port for easy identification of problems, such as incorrect communications parameters or wiring.
Communications Success Rate Measurement Mode
Host Device Communications Monitor Mode (Protocol Analyzer Function)
Tag Communications Test Mode
Host Device Communications Confirmation Mode
Read/Write
Antenna
ID Tag
100
communications
Command:
RDSTH100100010*CR
Response:
RD72*CR
Read/Write
Antenna
Monitor:
RDSTH100100010*CR
RD72*CR
Personal computer
Host device
Programmable Controller
(PLC)
Notebook PC
Monitor
6V680 Series RFID System
RFID System
V680 Series
New, Next-generation RFID Systems with
ISO/IEC 18000-3 (ISO/IEC15693) Compliance
• High-Speed, 27kbps communication rate. For V680-D@KF68,
communication rate from tag to Antenna is 53kbps.
• Read/Write Antennas and ID Tags with excellent environmental
resistance.
• Wide line-up of ultra-compact, long-life ID Tags, with capacities
from 1 to 32 kbytes.
• Seven modes make it possible to visualize data transmission.
• ID Map Manager simplifies memory map designing for ID Tags.
• Complies with FCC Standards and R&TTE Directive.
System Configuration
Connect V680 Read/Write Antennas and Amplifier Units to a V680-series Controller, and read or write data from or to ID Tags.
Controller Type
Host Device
Controller
Extension Cable
Amplifier Unit
Read/Write Antenna
ID Tag
1-kbyte ID Tags
8-kbyte ID Tags 32-kbyte ID Tags
V680-D1KP52MT V680-D1KP54T V680-D1KP66T-SP
V680-D1KP53M V680-D1KP58HTV680-D1KP66T
V680-D1KP66MT V680-D2KF67V680-D2KF52M
V680-D2KF67M
V680-D8KF67
V680-D8KF67M V680-D8KF68 V680-D32KF68
Personal computer Standard Programmable
Controller
SYSMAC
CJ/CS Series
Standard 1-channel Controller
V680-CA5D01-V2
V700-A40/41/42/43/44/45
Cable length (2/3/5/10/20/30) M
V700-A40-W
Cable length (2/5/10/20/30) M
Standard 2-channel Controller
V680-CA5D02-V2
CS/CJ-series PLC I/O Sensor Units (1 or 2 channels)
CJ1W-V680C11/C12 CS1W-V680-C11/C12
The V680-H01-V2 can be used only
with 1-channel Controllers or I/O Sensor Units.
The maximum extendable
cable length is 30 m.
An Amplifier is not
required. It is built in.
The maximum extendable cable length is 40 m.
(Not including the Amplifier or Antenna.)
Do not connect more than two Extension Cables to each other.
For 1-Kbyte ID Tags V680-HA63A
Cable length (5/10) M
For 2-, 8-, or 32-Kbyte ID Tags V680-HA63B
Cable length (5/10) M
V680-HS51
Cable length 2 M
V680-HS52
Cable length (2/12.5) M
V680-HS63
Cable length (2/12.5) M
V680-HS65
Cable length (2/12.5) M
V680-H01-V2
Cable length 0.5 M
Max. extended length: 62.5 m
Max. extended length: 30.5 m
2-kbyte ID Tags
Two Extension Cables
cannot be connected to
each other.
V680 Series RFID System 7
Handheld Type
Connection List for Amplifier Unit, Antena, and Tag
Note 1. Use a V680-HS51/HS52 Antenna if the V680-D1KP52MT or V680-D2KP52M is to be embedded in metal. V680-HS63 Antenna can not
be used in this condition.
2. For details, refer to the following User's Manuals (Cat. No. Z248, Z249, Z262, Z271 and Z272).
Transmission is also possible with ID Tags other than those of the V680 Series as long as they comply with ISO/IEC 18000-3 (ISO/IEC 15693).
However, transmission with ID Tags other than those of the V680 Series cannot be assured. The user must confirm transmission capabilities
carefully prior to use.
Amplifier Unit Antenna EEPROM
1-kbyte
V680-
D1KP52MT
V680-
D1KP53M
V680-
D1KP54T
V680-
D1KP66T
V680-
D1KP66MT
V680-
D1KP66T-SP
V680-
D1KP58HT
For 1-kbyte ID Tags
V680-HA63A
V680-HS51 x x
V680-HS52 x x x x x x
V680-HS63 x
(See note 1.) x x x x
V680-HS65 x x x x
V680-H01-V2 (Read/Write Antenna
with Built-in Amplifier) x x
V680-CH@D
(Handheld Rader Writer) x x x x x x x
Amplifier Unit Antenna FRAM
2-kbyte 8-kbyte 32-kbyte
V680-
D2KF52M
V680-
D2KF67
V680-
D2KF67M
V680-
D8KF67
V680-
D8KF67M
V680-
D8KF68
V680-
D32KF68
For 2/8/32-kbyte ID
Tags
V680-HA63B
V680-HS51 x
V680-HS52 x x x x x
V680-HS63 x
(See note 1.) x x x x x x
V680-HS65 x x x x x x
V680-H01-V2 (Read/Write Antenna
with Built-in Amplifier) x x x x
V680-CH@D
(Handheld Rader Writer) x x x x x x x
Host Device
ID Tags
Handheld Reader Writer
Standard Programmable Controller SYSMAC Series Personal computer
Handheld Terminal
(Recommended: Psion Teklogix Handheld Terminal)
Handheld Reader Writer
for Psion Teklogix Handheld Terminal
V680-CH1D-PSI
Standard Serial
Handheld Reader Writer
V680-CH1D
USB Handheld Reader Writer
V680-CHUD
AC Adapter
(order separately)
V600-A22
V680-D1KP52MT V680-D1KP54T V680-D1KP66T-SP
V680-D1KP53M V680-D1KP58HTV680-D1KP66T
V680-D1KP66MT V680-D2KF67V680-D2KF52M
V680-D2KF67M
V680-D8KF67
V680-D8KF67M V680-D8KF68
1-kbyte ID Tags
8-kbyte ID Tags
V680-D32KF68
32-kbyte ID Tags
2-kbyte ID Tags
8V680 Series RFID System
Ordering Information
ID Tag
Read/Write Antenna (Detachable Amplifier Unit Type)
Type Memory capacity Appearance Size Metallic compatibility Model
Battery-less 1 kbyte 8 dia. u 5 mm For embedding in metallic
or non-metallic surface
V680-D1KP52MT
10 dia. u 4.5 mm For embedding in metallic
or non-metallic surface
V680-D1KP53M
20 dia. u 2.7 mm For flush mounting on
non-metallic surface
V680-D1KP54T
34 u 34 u 3.5 mm For flush mounting on
metallic surface
V680-D1KP66MT
For flush mounting on
non-metallic surface
V680-D1KP66T
95 u 36.5 u 6.5 mm For flush mounting on
non-metallic surface
V680-D1KP66T-SP
80 dia. u t10 mm For flush mounting on
non-metallic surface
V680-D1KP58HT
2 kbytes 8 dia. u 5 mm For embedding in metallic
or non-metallic surface
V680-D2KF52M
40 u 40 u 4.5 mm For flush mounting on
metallic surface
V680-D2KF67M
For flush mounting on
non-metallic surface
V680-D2KF67
8 kbytes For flush mounting on
metallic surface
V680-D8KF67M
For flush mounting on
non-metallic surface
V680-D8KF67
86 u 54 u 10 mm For flush mounting on
non-metallic surface
V680-D8KF68
32 kbytes V680-D32KF68
Type Appearance Size Cable length Model
Cylindrical Standard cable,
waterproof connector
M22 u 65 mm 2 m V680-HS52-W 2M
12.5 m V680-HS52-W 12.5M
Flexible cable, non-
waterproof connector
2 m V680-HS52-R 2M
12.5 m V680-HS52-R 12.5M
Standard cable, non-
waterproof connector
M12 u 35 mm 2 m V680-HS51 2M
Square Standard cable,
waterproof connector
40 u 53 u 23 mm 2 m V680-HS63-W 2M
12.5 m V680-HS63-W 12.5M
Flexible cable, non-
waterproof connector
2 m V680-HS63-R 2M
12.5 m V680-HS63-R 12.5M
Standard cable,
waterproof connector
100 u 100 u 30 mm 2 m V680-HS65-W 2M
12.5 m V680-HS65-W 12.5M
Flexible cable, non-
waterproof connector
2 m V680-HS65-R 2M
12.5 m V680-HS65-R 12.5M
V680 Series RFID System 9
Read/Write Antenna with Built-in Amplifier
Note: Use an Antenna Cable (V700-A40-W @M) to connect the Read/Write Antenna to the Controller.
The maximum cable length is 30.5 m.
Amplifier Unit
Controller
ID Sensor Units
Note: When connected to the V680-H01: 0.28 A
Handheld Reader Writers
Type Appearance Size Cable length Model
Square 250 u 200 u 35 mm 0.5 m (See note.) V680-H01-V2
Type Appearance Size Cable length Model
For 1-kbyte memory 25 u 40 u 65 mm 5 m V680-HA63A 5M
10 m V680-HA63A 10M
For 2-/8-/32-kbyte memory 5 m V680-HA63B 5M
10 m V680-HA63B 10M
Type No. of connectable
Amplifiers
Appearance Size Transmission interface Model
DC power supply Single 105 u 90 u 65 mm RS232C,
RS422/RS485
V680-CA5D01-V2
Dual V680-CA5D02-V2
Type Unit name Connected ID System External
power supply
No. of unit
numbers used
Current consumption (A) Model
5 V 24 V External
CJ1
Special
I/O Unit
V680 Series 1 Head --- 1 unit number 0.26 0.13
(See
note.)
--- CJ1W-
V680C11
2 Heads 2 unit number 0.32 0.26 --- CJ1W-
V680C12
Type Unit name Connected ID System External
power supply
No. of unit
numbers used
Current consumption (A) Model
5 V 26 V External
CS1
Special
I/O Unit
V680 Series 1 Head --- 1 unit number 0.26 0.13
(See
note.)
--- CS1W-
V680C11
2 Heads 24 VDC 2 unit number 0.32 --- 0.36 CS1W-
V680C12
Name Model
Model with standard serial connector V680-CH1D
Model with USB connector and 0.8-m cable V680-CHUD 0.8M
Model with USB connector and 1.9-m cable V680-CHUD 1.9M
Models for Psion Teklogix Handheld Terminal V680-CH1D-PSI
AC Adapter (for V680-CH1D) V600-A22
10 V680 Series RFID System
Accessories (Order Separately)
ID Tag Attachment
Amplifier Unit Special Extension Cable (Amplifier Unit to Controller)
Note: The cable can be extended up to 40 m. Up to two extension cables can be used.
V680-H01 Read/Write Antenna Special Cable (Read/Write Antenna to Controller)
Note: The cable can be extended up to 30 m. Only one extension cable can be used.
RS-232C Communications Connector
Note: An RS422/RS485 Communications Connector is attached to
the Controller (V680-CA5D0X-V2).
ID Map Manager (for Windows)
Type Appearance Model
For the V680-D1KP66T V600-A86
For the V680-D@KF68 V680-A81
To mount the V680-D1KP58HT V680-A80
For the V680-D1KP54T V700-A80
Cable length Appearance Model
2 m V700-A40 2M.
3 m V700-A41 3M.
5 m V700-A42 5M.
10 m V700-A43 10M.
20 m V700-A44 20M.
30 m V700-A45 30M.
Cable length Appearance Model
2 m V700-A40-W 2M
5 m V700-A40-W 5M
10 m V700-A40-W 10M
20 m V700-A40-W 20M
30 m V700-A40-W 30M
Name Model
Connector Plug XM3B-0922-111
Connector Hood XM2S-0911
Type Model
English version V680-A-IMMEG-P01
V680 Series RFID System 11
Psion Teklogix Handheld Terminals
We recommend connecting the V600-V680-CH-PSI Handheld Reader Writer to a Psion Teklogix WORKABOUT PRO-series Handheld Terminal.
Psion Teklogix products can be purchased directly from OMRON.
Handheld Terminal Set
Note: The Handheld Terminal Set includes the V600/V680 EasyAccess/CBAccess Demo Software preinstalled in a 7527S-G2 Psion Teklogix
Handheld Terminal and the configuration parts listed above.
Handheld Terminal Only
Note: The Handheld Terminal includes the V600/V680 EasyAccess/CBAccess Demo Software preinstalled in a 7527S-G2 Psion Teklogix
Handheld Terminal and the configuration parts listed above. The High-capacity Battery is not included.
Handheld Terminal Accessories
Refer to the following website for detailed information on Psion Teklogix Handheld Terminals.
http://www.psionteklogix.com/products/handheld/workaboutpro.htm
Name Configuration OMRON model number
Handheld Terminal Set
(English OS)
Handheld Terminal, Serial End Cap, hand strap, charger
(standard model), and High-capacity Battery
V680-A-7527S-G2-EG-S
Name Configuration Appearance OMRON model number
Handheld Terminal
(English OS)
Handheld Terminal, Serial End Cap,
and hand strap
(Battery sold separately.)
V680-A-7527S-G2-EG
Name Appearance Psion Teklogix model number OMRON model number
High-capacity Battery WA3006 V680-A-WA3006
Charger
(standard model)
PS1050-G1 V680-A-CA1053
Charger
(advanced model)
WA4003-G2 V680-A-WA4003
Carrying Case WA6197-G2 V680-A-WA6197
12 V680 Series RFID System
Ratings and Performance
ID Tag (1-kbyte Memory)
Note 1. Refer to the User's Manual (Cat. No. Z262) for data backup time for temperatures of 85qC or higher. If the V680 has been stored at 125qC
or higher, write the data again even if the data does not need to be changed.
2. 150qC heat resistance: The heat resistance has been checked at 150qC for up to 1,000 hours, and thermal shock has been checked
through testing 1,000 thermal cycles each of 30 minutes at 10/150qC. (Test samples: 22, defects: 0)
3. 180qC heat resistance: The heat resistance has been checked at 180qC for up to 200 hours, and thermal shock has been checked through
testing 200 thermal cycles each of 30 minutes at 10qC/180qC. (Test samples: 22, defects: 0)
4. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM1030 standard.
5. For details, refer to the User's Manual (Cat. No. Z262).
ID Tag with 1-kbyte Memory with High-temperature Capability
Note: The data storage time at high temperatures (110 to 200qC) is 10 hours. Rewrite the data before 10 hours has lapsed.
Heat Resistance
Sufficient heat resistance has been confirmed by evaluation testing comprising 2,000 thermal cycles each of 30 minutes at room temperature/
200qC.
The lifetime of the V680-D1KP58HT is affected by high-temperature storage, due to the effects of high temperatures on internal components. For
details on the relationship between heat resistance and lifetime, refer to the User's Manual (Cat. No. Z262).
Model
Item
V680-D1KP52MT V680-D1KP53M V680-D1KP54T V680-D1KP66T V680-D1KP66MT V680-D1KP66T
-SP
Memory capacity 1,000 byte (user area)
Memory type EEPROM
Data backup time (See note 1.) 10 years after writing (85qC max.)
Memory longevity 100,000 times per block (at 25qC)
Ambient operating temperature
(during transmission)
25 to 85qC (with no icing) 25 to 70qC
(with no icing)
Ambient storage temperature
(during data backup)
40 to 125qC (with no icing)
Heat resistance: 1,000 thermal cycles each of 30 minutes at 10qC/150qC, High-
temperature storage: 1,000 hours at 150qC (See note 2.)
200 thermal cycles each of 30 minutes at 10qC/180qC, High-temperature
storage: 200 hours at 180qC (See note 3.)
40 to 110qC
(with no icing)
Ambient operating humidity 35 to 95%
Degree of protection IEC 60529, IP68
In-house standard for antenna oil resistance (former JEM1030 standard equivalent to
IP67g) (See note 4.)
IP67
Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for
15 minutes each
Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance 8 dia. u 5 mm 10 dia. u 4.5 mm
(DIN698373)
20 dia. u 2.7 mm 34 u 34 u 3.5 mm 95 u 36.5 u 6.5
mm (excluding
protrusions)
Materials Case: PPS resin
Filling: Epoxy resin
Molding: PPS resin External resin:
PFA
Tag body: PPS
resin
Weight Approx. 0.5 g Approx. 1 g Approx. 2 g Approx. 6 g Approx. 7.5 g Approx. 20 g
Metallic compatibility Yes Yes No No Yes No
Item Model V680-D1KP58HT
Memory capacity 1,000 byte (user area)
Memory type EEPROM
Data backup time 10 years after writing (See note.)
Memory longevity 100,000 times per block (at 85qC)
Ambient operating temperature
(during transmission)
10 to 85qC (with no icing)
Ambient storage temperature
(during data backup)
40 to 110qC (with no icing)
Heat resistance: 2,000 thermal cycles each of 30 minutes at room temperature/200qC (Refer to Heat
Resistance, below, for details.)
Ambient operating humidity No limits.
Degree of protection IEC 60529, IP67
Vibration resistance 10 to 2,000 Hz, 3.0-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for
15 minutes each
Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Materials PPS resin
Weight Approx. 90 g
V680 Series RFID System 13
ID Tag (2-kbyte Memory)
Note 1. Refer to the User's Manual (Cat. No. Z248) for data backup time for temperatures of 55qC or higher.
2. The total Read or Write communication frequency is called the access frequency.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM1030 standard.
4. For details, refer to the User’s Manual (Cat. No. Z248).
ID Tag with 8-/32-kbyte Memory
Note 1. Refer to the User’s Manual (Cat. No. Z248) for data backup time for temperatures of 70qC or higher.
2. The total Read or Write communication frequency is called the access frequency.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM1030 standard.
4. For details, refer to the User’s Manual (Cat. No. Z248).
Item Model V680-D2KF52M V680-D2KF67 V680-D1KF67M
Memory capacity 2,000 bytes (user area)
Memory type FRAM
Data backup time (See note 1.) 10 years after writing (55qC or less)
Memory longevity 10 billion times per block. Access frequency (See note 2.): 10 billion times
Ambient operating
temperature
25 to 85qC (with no icing)
Ambient storage temperature 40 to 85qC (with no icing)
Ambient operating humidity 35 to 95% 35 to 85%
Degree of protection IEC 60529, IP67
In-house standard for antenna oil resistance (former JEM1030 standard equivalent to IP67g) (See note 3.)
Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for
15 minutes each
Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance 8 dia. u 5 mm 40 u 40 u 4.5 mm
Materials Case: PPS resin
Filling: Epoxy resin
Molding: PBT resin
Filling: Epoxy resin
Weight Approx. 0.5 g Approx. 6.5 g Approx. 7 g
Metallic compatibility Yes No Yes
Item Model V680-D8KF67 V680-D8KF67M V680-D8KF68 V680-D32KF68
Memory capacity 8,192 bytes (user area) 32,744 bytes (user area)
Memory type FRAM
Data backup time (See note 1.) 10 years (at 70qC max.) after data is written
Memory longevity 10 billion times per block at 85qC max. Access frequency (See note 2.): 10 billion times
Ambient operating
temperature
20 to 85qC (with no icing)
Ambient storage temperature 40 to 85qC (with no icing)
Ambient operating humidity 35 to 85%
Degree of protection IEC 60529, IP67
In-house standard for antenna oil resistance (former JEM1030 standard equivalent to IP67g) (See note 3.)
Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2
acceleration with 10 sweeps in X, Y, and Z directions
for 15 minutes each
10 to 500 Hz, 1.5-mm double amplitude at 100 m/s2
acceleration with 10 sweeps in X, Y, and Z directions
for 11 minutes each
Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Dimensions 40 u 40 u 4.5 mm 86 u 54 u 10 mm
Materials Case: PBT resin
Filling: Epoxy resin
Weight Approx. 8 g Approx. 8.5 g Approx. 50 g
Metallic compatibility No Yes No
14 V680 Series RFID System
Cylindrical Read/Write Antenna (Detachable Amplifier Unit Type)
Note 1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It
is equivalent to the former JEM1030 standard.
2. The Connector is not waterproof. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former
JEM1030 standard.
3. For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
Square Read/Write Antenna (Detachable Amplifier Unit Type)
Note 1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It
is equivalent to the former JEM1030 standard.
2. The Connector is not waterproof. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former
JEM1030 standard.
3. For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
Model
Item
V680-HS52-W
(Standard Cable, Waterproof
Connector)
V680-HS52-R
(Flexible Cable, Non-waterproof
Connector)
V680-HS51
(Standard Cable, Non-waterproof
Connector)
Ambient operating temperature 10 to 60qC (with no icing)
Ambient storage temperature 25 to 75qC (with no icing)
Ambient operating humidity 35% to 95% (with no condensation)
Insulation resistance 20 M: min. (at 500 VDC) between the cable terminals and the case
Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection IP67 (IEC60529)
In-house standard for antenna oil
resistance (former JEM1030 standard
equivalent to IP67g) (Read/Write
Antenna portion) (See note 1.)
IP67 (IEC60529)
In-house standard for antenna oil resistance (former JEM1030 standard
equivalent to IP67g) (Read/Write Antenna portion) (See note 2.)
Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2
acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
10 to 2,000 Hz variable vibration, 1.5-
mm double amplitude at 150 m/s2
acceleration, with 10 sweeps in X, Y,
and Z directions for 15 minutes each
Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) 1,000 m/s2 in X, Y, and Z directions 3
times each (18 times in total)
Appearance M22 u 65 mm M12 u 35 mm
Materials ABS, brass, epoxy resin filling
Weight Approx. 850 g (with 12.5-m cable) Approx. 55 g (with 2-m cable)
Model
Item
V680-HS63-W
(Standard Cable, Waterproof Connector)
V680-HS63-R
(Flexible Cable, Non-waterproof Connector)
Ambient operating temperature 10 to 60qC (with no icing)
Ambient storage temperature 25 to 75qC (with no icing)
Ambient operating humidity 35% to 95% (with no condensation)
Insulation resistance 20 M: min. (at 500 VDC) between the cable terminals and the case
Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection IP67 (IEC60529)
In-house standard for antenna oil resistance (former
JEM1030 standard equivalent to IP67g) (Read/Write
Antenna portion) (See note 1.)
IP67 (IEC60529)
In-house standard for antenna oil resistance (former
JEM1030 standard equivalent to IP67g) (Read/Write
Antenna portion) (See note 2.)
Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z
directions for 11 minutes each
Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance 40 u 53 u 23 mm
Materials ABS, epoxy resin filling
Weight Approx. 850 g (with 12.5-m cable)
Model
Item
V680-HS65-W
(Standard Cable, Waterproof Connector)
V680-HS65-R
(Flexible Cable, Non-waterproof Connector)
Ambient operating temperature 25 to 70qC (with no icing)
Ambient storage temperature 40 to 85qC (with no icing)
Ambient operating humidity 35% to 95% (with no condensation)
Insulation resistance 20 M: min. (at 500 VDC) between the cable terminals and the case
Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection IP67 (IEC 60529)
In-house standard for antenna oil resistance (former
JEM1030 standard equivalent to IP67g) (Read/Write
Antenna portion) (See note 1.)
IP67 (IEC 60529)
In-house standard for antenna oil resistance (former
JEM1030 standard equivalent to IP67g) (Read/Write
Antenna portion) (See note 2.)
Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z
directions for 11 minutes each
Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance 100 u 100 u 30 mm
Materials ABS, epoxy resin filling
Weight Approx. 1,100 g (with 12.5-m cable)
V680 Series RFID System 15
Square Read/Write Antenna with Built-in Amplifier
Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
Amplifier Unit
Note 1. When connected to the V680-HS63-R or V680-HS52-R.
2. When connected to the V680-HS63-W or V680-HS52-W. (Not including the Connector on the Controller.)
3. For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
Item Model V680-H01-V2
Ambient operating temperature 10 to 55qC (with no icing)
Ambient storage temperature 35 to 65qC (with no icing)
Ambient operating humidity 35% to 85% (with no condensation)
Insulation resistance 20 M: min. (at 100 VDC) between the back plate and the case
Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the back plate and the case with a current leakage of 1 mA max.
Degree of protection IEC 60529: IP63 (Mounting direction: Transmission surface facing up)
Vibration resistance 10 to 150 Hz variable vibration, 0.7-mm double amplitude with 4 sweeps in X, Y, and Z directions for 8 minutes
each
Shock resistance 150 m/s2 in X, Y, and Z directions 3 times each
Appearance 200 u 250 u 40 mm
Material Polycarbonate (PC) resin, ASA resin / Rear Panel: Aluminum
Weight Approx. 900 g
Cable length 0.5 m
Item Model V680-HA63A V680-HA63B
Ambient operating temperature 10 to 55qC (with no icing)
Ambient storage temperature 25 to 65qC (with no icing)
Ambient operating humidity 35% to 85% (with no condensation)
Insulation resistance 20 M: min. (at 500 VDC) between the cable terminals and the case
Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA
max.
Degree of protection IP40 (IEC60529) (See note 1.) IP67/IP65 (IEC60529) (See note 2.)
Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y,
and Z directions for 11 minutes each
Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance 25 u 40 u 65 mm (not including projections)
Material Polycarbonate (PC) resin
Weight Approx. 650 g (with 10-m cable)
Cable length 5 m, 10 m
Transmittable ID Tags 1-kbyte memory 2-, 8-, 32-kbyte memory
16 V680 Series RFID System
Controller
Note: For details, refer to the User's Manual (Cat. No. Z249).
■USB Port
The USB port is used for a simple connection with a personal computer using a USB cable. The port complies with USB 1.1, and the USB cable
uses a series A or series mini-B connector. A USB port driver must be separately provided. Consult with your OMRON representative for details.
When connected to a host device via USB, the communications will use 1:1 protocol regardless of the setting of DIP switches 3 to 9.
The USB port is not used for control purposes. When building a system, be sure to provide an RS-232C port or RS-422/RS-485C port.
ID Sensor Units
Note: When connected to the V680-H01: 280 mA
Item Model V680-CA5D01-V2 V680-CA5D02-V2
Power supply voltage
(Power consumption)
24 VDC (15% to +10%)
15 W max., 0.8 A max.
Communications Specifications RS-232C, RS-422, RS-485
Input Specifications (Input voltage)
RST, TRG1, and TRG2
24 VDC (+10% to 15%, including ripple) (PNP and NPN compatible)
Output Specifications (Maximum switching capacity)
RUN, BUSY/OUTS, ERROR/OUT4, OUT1, and OUT2
24 VDC (+10% to 15%, including ripple)
100-mA photoMOS output (PNP and NPN compatible)
Ambient operating temperature 10 to 55qC (with no icing)
Ambient storage temperature 25 to 65qC (with no icing)
Ambient operating humidity 25% to 85% (with no condensation)
Insulation resistance 20 M: min. (at 500 VDC) applied as follows:
(1) Between power supply terminals and grounded case
(2) Between ground and terminals
Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute
(1) Between power supply terminals and grounded case
(2) Between ground and terminals
Degree of protection Panel mounted (equivalent to IP20)
Vibration resistance 10 to 150 Hz variable vibration, 0.2-mm double amplitude at 15 m/s2 acceleration, with 10
sweeps in X, Y, and Z directions for 8 minutes each
Shock resistance 150 m/s2
Appearance 105 u 90 u 65 mm (not including projections)
Material Polycarbonate (PC) resin, ABS resin
Weight Approx. 300 g
Connectable Amplifier Units 12
Item Model CJ1W-V680C11 CJ1W-V680C12 CS1W-V680C11 CS1W-V680C12
Current
consumption
Internal: 5 V 260 mA 320 mA 260 mA 320 mA
Internal:
24 V/26 V
130 mA (See note.) 260 mA 125 mA (See note.) ---
External: 24 V --- --- --- 360 mA
Ambient operating
temperature
0 to 55qC
Ambient storage temperature 20 to 75qC
Ambient operating humidity 10% to 90% (with no condensation)
Insulation resistance 20 m: min. at 500 VDC
Dielectric strength 1,000 VAC for 1 minute
Degree of protection Mounted in panel (IP30)
Vibration resistance 10 to 57 Hz variable vibration, 0.075-mm double amplitude and 57 to 150 Hz variable vibration at 9.8 m/s2
acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
Shock resistance 147 m/s2 in X, Y, and Z directions 3 times each
Appearance 31 u 65 u 90 mm (excluding protrusions) 35 u 130 u 101 mm (excluding protrusions)
V680 Series RFID System 17
Functional Specifications of ID Sensor Units
Note 1. Cannot be used for communications with the V680-D1KP@@.
2. For details, refer to the User's Manual (Cat. No. Z271).
Handheld Reader Writers
Note 1. Refer to the User's Manual (Cat. No. Z272) for details.
2. This does not include the connector section. The main unit is not resistant to chemical or oils.
AC Adapter (for V680-CH1D)
Item Model CJ1W-V680C11 CJ1W-V680C12 CS1W-V680C11 CS1W-V680C12
Communications control
protocol
Special protocol for CS1 and CJ1 PLCs
Number of Read/Write Head
connections
1212
Commands Supported commands: Read, Write, Bit Set/Bit Clear, Mask Bit Write, Calculation Write, Data Fill, Data Check,
Number of Writes Control, Copy, Read with Error Correction/Write with Error Correction, UID Read, and Noise
Measurement.
The following communications options are supported: Single trigger, Single auto, Repeat auto, FIFO trigger, FIFO
repeat (See note.), Multi-access trigger, and Multi-access repeat (See note.)
Data transfer quantity 2,048 bytes max. (160 bytes/scan)
Diagnostic function (1) CPU watchdog timer
(2) Communications error detection with ID Tag
(3) Antenna power supply error
Monitoring/testing
functions
Tag communications can be tested in Test Mode. Status is displayed by LED indicators.
Number of allocated words 10 words 20 words 10 words 20 words
Item Model V680-CHUD 0.8M V680-CHUD 1.9M V680-CH1D V680-CH1D-PSI
Power supply voltage 5 VDC±5%
Current consumption 500 mA max. (for a power supply voltage of 5.0 V)
Communications
specifications
USB (Series A plug) Ver.1.1 RS-232C (D-SUB 9-pin)
(compatible with IBM
PC/AT)
RS-232C (D-SUB 9-pin)
Ambient operating
temperature during
communication
0 to +40qC
Ambient storage
temperature
25 to +65qC
Ambient operating humidity
during communication
35% to 85% (with no condensation)
Insulation resistance 50 M: min. (at 500 VDC) between connector and case
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min (leakage current: 1 mA max.) between connectors and case
Degree of protection IEC 60529: IP63 (See note 2.)
Vibration resistance Destruction: 10 to 150 Hz, 0.2-mm double amplitude, with 10 sweeps for 8 min each in 6 directions
Shock resistance Destruction: 150 m/s2, 3 times each in X, Y, and Z directions
Weight Approx. 110 g
(including connector and
cable)
Approx. 140 g
(including connector and
cable)
Approx. 170 g
(including connector and
cable)
Approx. 120 g
(including connector and
cable)
Cable length 0.8 m 1.9 m 2.5 m 0.8 m
Item Model V600-A22
Input voltage 100 to 120 VAC at 50/60 Hz
Input current 100 VAC: 200 mA ±20%, 120 VAC: 170 mA ±20%
Output voltage 5 VDC ±0.25 V
Ambient operating
temperature
0 to 40qC (with no icing)
Ambient storage
temperature
40 to 70qC (with no icing)
Ambient operating
humidity
25% to 85% (with no condensation)
Insulation resistance 100 M: min. (at 500 VDC) between input terminals and output terminals
Dielectric strength 1,500 V for 1 minute between input terminals and output terminals with a current leakage of 5 mA max.
Weight Approx. 85 g
Applicable standards UL/CSA
18 V680 Series RFID System
■Performance Specifications
ID Tag (1-kbyte Memory) Transmission
Note: When using the V680-D1KP53M embedded in metal, use the V680-HS51/-HS52 Antenna. Communications will not be possible with a V680-
HS63 Antenna.
Recommended combination Function Transmission distance
(unit: mm)
ID Tag and Read/Write Antenna mounting
conditions
ID Tag Read/Write Antenna
V680-D1KP52MT V680-HS52 Read
distance
0 to 9.0 mm
(axial deviation r2)
Write
distance
0 to 8.5 mm
(axial deviation r2)
V680-HS51 Read
distance
0.5 to 6.5 mm
(axial deviation r2)
Write
distance
0.5 to 6.0 mm
(axial deviation r2)
V680-D1KP52MT
(embedded in metallic
surface: steel)
V680-HS52 Read
distance
0 to 4.5 mm
(axial deviation r2)
Write
distance
0 to 4.0 mm
(axial deviation r2)
V680-HS51 Read
distance
0.5 to 3.5 mm
(axial deviation r2)
Write
distance
0.5 to 3.5 mm
(axial deviation r2)
V680-D1KP52MT V680-HS63 Read
distance
0 to 12.0 mm
(axial deviation r2)
Write
distance
0 to 9.5 mm
(axial deviation r2)
V680-D1KP53M V680-HS52 Read
distance
0 to 9.0 mm
(axial deviation r2)
Write
distance
0 to 8.5 mm
(axial deviation r2)
V680-HS51 Read
distance
0.5 to 6.5 mm
(axial deviation r2)
Write
distance
0.5 to 6.0 mm
(axial deviation r2)
V680-D1KP53M
(embedded in metallic
surface : steel)
V680-HS52 Read
distance
0 to 4.5 mm
(axial deviation r2)
(See note.)
Write
distance
0 to 4.0mm
(axial deviation r2)
(See note.)
V680-HS51 Read
distance
0.5 to 3.5 mm
(axial deviation r2)
(See note.)
Write
distance
0.5 to 3.0 mm
(axial deviation r2)
(See note.)
V680-D1KP52MT
V680-HS52
Non-metallic Non-metallic
(
Resin,
p
lastic, wood, etc.
)
V680-D1KP52MT
V680-
HS51
Metallic
Non-metallic
(Resin, plastic, wood, etc.)
Non-metallic V680-D1KP52MT
V680-HS52
Metalli
c
Metallic
V680-D1KP52MT
Metalli
c
V680-
HS51
Non-metallic
(Resin, plastic, wood, etc.)
V680-HS63
V680-
D1KP52MT
Non-metallic
V680-D1KP53M
V680-
HS52
Non-metalli
Non-metallic
(Resin, plastic, wood, etc.)
V680-D1KP53M
V680-
HS51
Metallic
Non-metallic
(Resin, plastic, wood, etc.)
Non-metallic V680-D1KP53M
Metallic
V680-
HS52
Metallic
V680-D1KP53M
Metallic
V680-
HS51
V680 Series RFID System 19
Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
2. The transmission distance may be reduced if the V680-D1KP66T is mounted onto a metallic surface. Refer to theUser's Manual (Cat. No.
Z262) for details.
Recommended combination Function Transmission distance
(unit: mm)
ID Tag and Read/Write Antenna mounting
conditions
ID Tag Read/Write Antenna
V680-D1KP54T V680-HS52 Read
distance
0 to 17.0 mm
(axial deviation r2)
Write
distance
0 to 15.0 mm
(axial deviation r2)
V680-HS63 Read
distance
0 to 24.0 mm
(axial deviation r10)
Write
distance
0 to 20.0 mm
(axial deviation r10)
V680-HS65 Read
distance
0 to 33.0 mm
(axial deviation r10)
Write
distance
0 to 28.0 mm
(axial deviation r10)
V680-D1KP66T V680-HS52 Read
distance
0 to 17.0 mm
(axial deviation r2)
(See note 2.)
Write
distance
0 to 17.0 mm
(axial deviation r2)
(See note 2.)
V680-HS63 Read
distance
0 to 30.0 mm
(axial deviation r10)
(See note 2.)
Write
distance
0 to 25.0 mm
(axial deviation r10)
(See note 2.)
V680-HS65 Read
distance
0 to 47.0 mm
(axial deviation r10)
(See note 2.)
Write
distance
0 to 42.0 mm
(axial deviation r10)
(See note 2.)
V680-H01-V2 Read
distance
0 to 100.0mm
(axial deviation r10)
Write
distance
0 to 100.0 mm
(axial deviation r10)
Non-metallic
V680-D1KP54T
V680-
HS52
Non-metallic
(Resin, plastic, wood, etc.)
Non-metallic
V680-D1KP54T
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
Metallic
V680-D1KP54T
V680-HS65
Non-metallic
(Resin, plastic, wood, etc.)
V680-HS52
Non-metallic Non-metallic
(Resin, plastic, wood, etc.)
V680-D1KP66T
V680-HS63
V680-
D1KP66T
Non-metallic
Non-metallic
(Resin, plastic, wood, etc.)
V680-HS65
V680-
D1KP66T
Non-metallic
(Resin, plastic, wood, etc.)
Metallic
V680-H01-V2
V680-D1KP66T
Non-metallic
Non-metallic
20 V680 Series RFID System
Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
2. The transmission distance may be reduced if the V680-D1KP58HT is mounted onto a metallic surface. Refer to theUser's Manual (Cat.
No. Z262) for details.
Recommended combination Function Transmission distance
(unit: mm)
ID Tag and Read/Write Antenna mounting
conditions
ID Tag Read/Write Antenna
V680-D1KP66MT
(flush-mounted on
metallic surface: steel)
V680-HS52 Read
distance
0 to 16.0 mm
(axial deviation r2)
Write
distance
0 to 14.0 mm
(axial deviation r2)
V680-HS63 Read
distance
0 to 25.0 mm
(axial deviation r10)
Write
distance
0 to 20.0 mm
(axial deviation r10)
V680-HS65 Read
distance
0 to 25.0 mm
(axial deviation r10)
Write
distance
0 to 20.0 mm
(axial deviation r10)
V680-D1KP66T-SP V680-HS52 Read
distance
0 to 17.0 mm
(axial deviation r2)
Write
distance
0 to 17.0 mm
(axial deviation r2)
V680-HS63 Read
distance
0 to 30.0 mm
(axial deviation r10)
Write
distance
0 to 25.0 mm
(axial deviation r10)
V680-HS65 Read
distance
0 to 47.0 mm
(axial deviation r10)
Write
distance
0 to 42.0 mm
(axial deviation r10)
V680-D1KP58HT V680-H01-V2 Read
distance
0 to 150 mm
(See note 2.)
Write
distance
V680-HS52
V680-D1KP66M
T
Non-metallic Metallic
V680-HS63
V680-
D1KP66MT
Non-metallic
Metalli
c
V680-HS65
V680-
D1KP66MT
Metallic
Metallic
V680-
HS52
V680-D1KP66T-SP
Non-metallic
(Resin, plastic, wood, etc.)
Non-metallic
V680-HS63
V680-
D1KP66T-SP
Non-metallic
(Resin, plastic, wood, etc.)
Non-metallic
V680-HS65
V680-
D1KP66T-SP
Non-metallic
(Resin, plastic, wood, etc.)
Metallic
Non-metallic
V680-D1KP58HT
Non-metallic
(Resin, plastic,
wood, etc.)
V680-H01-V2
V680 Series RFID System 21
ID Tag (2-kbyte Memory) Transmission
Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
2.
The transmission distance may be reduced if the V680-D2KF67 is mounted onto a metallic surface. Refer to theUser's Manual (Cat. No. Z248) for details.
Recommended combination Function Transmission distance
(unit: mm)
ID Tag and Read/Write Antenna mounting
conditions
ID Tag Read/Write Antenna
V680-D2KF52M V680-HS52 Read
distance
0 to 8.0 mm
(axial deviation r2)
Write
distance
0 to 8.0 mm
(axial deviation r2)
V680-HS51 Read
distance
0.5 to 5.5 mm
(axial deviation r2)
Write
distance
0.5 to 5.5 mm
(axial deviation r2)
V680-D2KF52M
(embedded in metallic
surface: steel)
V680-HS52 Read
distance
0 to 3.0 mm
(axial deviation r2)
Write
distance
0 to 3.0 mm
(axial deviation r2)
V680-HS51 Read
distance
0 to 3.5 mm
(axial deviation r2)
Write
distance
0 to 3.5 mm
(axial deviation r2)
V680-D2KF52M V680-HS63 Read
distance
0 to 9.5 mm
(axial deviation r2)
Write
distance
0 to 9.5 mm
(axial deviation r2)
V680-D2KF67 V680-HS52 Read
distance
0 to 17.0 mm
(axial deviation r2)
(See note.)
Write
distance
0 to 17.0 mm
(axial deviation r2)
(See note.)
V680-HS63 Read
distance
7 to 30.0 mm
(axial deviation r10)
(See note.)
Write
distance
7 to 30.0 mm
(axial deviation r10)
(See note.)
V680-HS65 Read
distance
0 to 42.0 mm
(axial deviation r10)
(See note.)
Write
distance
0 to 42.0 mm
(axial deviation r10)
(See note.)
V680-H01-V2 Read
distance
0 to 100.0 mm
(axial deviation r10)
Write
distance
0 to 100.0 mm
(axial deviation r10)
V680-D2KF52M
V680-HS52
Non-metallic Non-metallic
(
Resin
,p
lastic
,
wood
,
etc.
)
V680-D2KF52M
V680-
HS51
Non-metallic
(Resin, plastic, wood, etc.
)
Metallic
Non-metallic V680-D2KF52M
V680-HS52
Metallic
V680-D2KF52M
V680-
HS51
Metalli
c
Metallic
Non-metallic
(Resin, plastic, wood, etc.)
V680-HS63
V680-
D2KF52M
Non-metallic
V680-HS52
Non-metallic Non-metallic
(Resin, plastic, wood, etc.)
V680-D2KF67
V680-HS63
V680-
D2KF67
Non-metallic
Non-metallic
(Resin, plastic, wood, etc.)
V680-HS65
V680-
D2KF67
Metallic
Non-metallic
(Resin, plastic, wood, etc.)
V680-H01-V2
V680-D2KF67
Non-metallic
Non-metallic
22 V680 Series RFID System
Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
ID Tag (8-/32-kbyte Memory) Transmission
Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
Recommended combination Function Transmission distance
(unit: mm)
ID Tag and Read/Write Antenna mounting
conditions
ID Tag Read/Write Antenna
V680-D2KF67M (flush-
mounted on metallic
surface: steel)
V680-HS52 Read
distance
0 to 16.0 mm
(axial deviation r2)
Write
distance
0 to 16.0 mm
(axial deviation r2)
V680-HS63 Read
distance
6 to 25.0 mm
(axial deviation r10)
Write
distance
6 to 25.0 mm
(axial deviation r10)
V680-HS65 Read
distance
0 to 25.0 mm
(axial deviation r10)
Write
distance
0 to 25.0 mm
(axial deviation r10)
Recommended combination Function Transmission distance
(unit: mm)
ID Tag and Read/Write Antenna mounting
conditions
ID Tag Read/Write Antenna
V680-D8KF67 V680-HS52 Read
distance
0 to 17.0 mm
(axial deviation r2)
Write
distance
0 to 17.0 mm
(axial deviation r2)
V680-HS63 Read
distance
0 to 30.0 mm
(axial deviation r10)
Write
distance
0 to 30.0 mm
(axial deviation r10)
V680-HS65 Read
distance
0 to 42.0 mm
(axial deviation r10)
Write
distance
0 to 42.0 mm
(axial deviation r10)
V680-H01-V2 Read
distance
0 to 100.0 mm
(axial deviation r10)
Write
distance
0 to 100.0 mm
(axial deviation r10)
V680-HS52
V680-D2KF67M
Iron
Non-metallic
Metallic
V680-HS63
V680-
D2KF67M
Non-metallic
Metalli
c
V680-HS65
V680-
D2KF67M
Metallic
Metallic
V680-D8KF67
V680-
HS52
Non-metallic
(Resin, plastic, wood, etc.)
Non-metallic
V680-HS63
V680-
D8KF67
Non-metallic
(Resin, plastic, wood, etc.)
Non-metallic
V680-
D8KF67
V680-HS65
Metallic
Non-metallic
(Resin, plastic, wood, etc.)
V680-H01-V2
V680-D8KF67
Non-metallic
Non-metallic
V680 Series RFID System 23
Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
2. The transmission distance may be reduced if the V680-D@KF68 is mounted onto a metallic surface. Refer to the User's Manual (Cat. No.
Z248) for details.
Recommended combination Function Transmission distance
(unit: mm)
ID Tag and Read/Write Antenna mounting
conditions
ID Tag Read/Write Antenna
V680-D8KF67M (flush-
mounted on metallic
surface: steel)
V680-HS52 Read
distance
0 to 16.0 mm
(axial deviation r2)
Write
distance
0 to 16.0 mm
(axial deviation r2)
V680-HS63 Read
distance
0 to 25.0 mm
(axial deviation r10)
Write
distance
0 to 25.0 mm
(axial deviation r10)
V680-HS65 Read
distance
0 to 25.0 mm
(axial deviation r10)
Write
distance
0 to 25.0 mm
(axial deviation r10)
V680-D8KF68/
-D32KF68
V680-HS63 Read
distance
0 to 45.0 mm
(axial deviation r10)
(See note 2.)
Write
distance
0 to 45.0 mm
(axial deviation r10)
(See note 2.)
V680-HS65 Read
distance
0 to 75.0 mm
(axial deviation r10)
(See note 2.)
Write
distance
0 to 75.0 mm
(axial deviation r10)
(See note 2.)
V680-H01-V2 Read
distance
0 to 150.0 mm
(axial deviation r10)
Write
distance
0 to 150.0 mm
(axial deviation r10)
V680-
HS52
V680-D8KF67M
Metallic
Non-metallic
V680-HS63
V680-
D8KF67M
Metallic
Non-metallic
V680-HS65
V680-
D8KF67M
Metallic
Metallic
V680-HS63
V680-
D@KF68
Metallic
Non-metallic
(Resin, plastic, wood, etc.)
V680-HS65
V680-
D@KF68
Metallic
Non-metallic
(Resin, plastic, wood, etc.)
V680-H01-V2
V680-D8KF68/-D32KF68
Non-metallic
Non-metallic
24 V680 Series RFID System
Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
2. The transmission distance may be reduced if the V680-D@KF68 is mounted onto a metallic surface. Use V680-A81 special attachment.
Refer to the User's Manual (Cat. No. Z248) for details.
Characteristic Data (Typical)
Transmission Range (unit: mm)
1-kbyte Memory ID Tag
The values given for communications ranges are reference values. Refer to pages 18 to 20 for communications distance specifications.
The communications distance will depend on the ID Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation
completely when installing a system.
Recommended combination Function Transmission distance
(unit: mm)
ID Tag and Read/Write Antenna mounting
conditions
ID Tag Read/Write Antenna
V680-D8KF68/
-D32KF68
(Special attachment
provided; flush-mounted
on metallic surface:
steel)
V680-HS63 Read
distance
0 to 35.0 mm
(axial deviation r10)
Write
distance
0 to 35.0 mm
(axial deviation r10)
V680-HS65 Read
distance
0 to 55.0 mm
(axial deviation r10)
Write
distance
0 to 55.0 mm
(axial deviation r10)
V680-A81
(ID Tag Attachment)
V680-
D@KF68
Metallic
Metallic
V680-HS63
V680-A81
(ID Tag Attachment)
V680-
D@KF68
Metallic
Metallic
V680-HS65
V680-HS52 (embedded in non-metallic material) &
V680-D1KP52MT (embedded in non-metallic material)
V680-HS52 (embedded in non-metallic material) &
V680-D1KP52MT (embedded in metallic surface: steel)
V680-HS51 (embedded in metallic material) &
V680-D1KP52MT (embedded in non-metallic material)
V680-HS51 (embedded in metallic material) &
V680-D1KP52MT (embedded in metallic surface: steel)
0 10203040X−50 −40 −30 −20 −10
Read Write
X
Y
10
30
20
40
50
Y
010203040X−50 −40 −30 −20 −10
Read Write
X
Y
10
30
20
40
50
Y
10
30
20
40
50
Y
X
Y
0 10203040X−50 −40 −30 −20 −10
Read Write
10
30
20
40
50
Y
X
Y
0 10203040X−50 −40 −30 −20 −10
Read Write
V680 Series RFID System 25
V680-HS63 (mounted on non-metallic material) &
V680-D1KP52MT (embedded in non-metallic material)
V680-HS51 (embedded in metallic material) &
V680-D1KP53M (embedded in non-metallic material)
V680-HS51 (embedded in metallic material) &
V680-D1KP53M (embedded in metallic surface: steel)
V680-HS52 (embedded in non-metallic material) &
V680-D1KP53M (embedded in non-metallic material)
V680-HS52 (embedded in non-metallic material) &
V680-D1KP53M (embedded in metallic surface: steel)
V680-HS52 (embedded in non-metallic material) &
V680-D1KP54T (mounted on non-metallic material)
V680-HS63 (mounted on non-metallic material) &
V680-D1KP54T (mounted on non-metallic material)
V680-HS65 (mounted on metallic material) &
V680-D1KP54T (mounted on non-metallic material)
010203040X−50 −40 −30 −20 −10
Read Write
X
Y
10
30
20
40
50
Y
10
30
20
40
50
Y
010203040X−50 −40 −30 −20 −10
Read Write
10
30
20
40
50
Y
10 20 30 40 X
0−50 −40 −30 −20 −10
Read Write
10
30
20
40
50
Y
010203040X−50 −40 −30 −20 −10
Read Write
10
30
20
40
50
Y
010203040X−50 −40 −30 −20 −10
Read Write
Read Write
0 5 10 15 20 25 X−30 −25 −20 −15 −5−10
5
15
10
20
25
Y
Read Write
03010 20 X−30−40 −20 −10
10
20
30
Y
Read Write
0 3040506010 20 X−30−40−50−60−70 −20 −10
10
40
50
60
20
30
Y
26 V680 Series RFID System
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66T (mounted on non-metallic material)
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66T (mounted on non-metallic material)
V680-HS65 (mounted on metallic material) &
V680-D1KP66T (mounted on non-metallic material)
V680-H01-V2 (mounted on non-metallic material) &
V680-D1KP66T (mounted on non-metallic material)
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66T-SP (embedded in non-metallic material)
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66T-SP (mounted on non-metallic material)
V680-HS65 (mounted on metallic material) &
V680-D1KP66T-SP (mounted on non-metallic material)
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66MT (mounted on metallic surface: steel)
0 10203040X−50 −40 −30 −20 −10
Read Write
X
Y
10
30
20
40
50
Y
010203040−50 −40 −30 −20 −10 X
Read Write
10
30
20
40
50
Y
X
Y
0
−80−100 −20
−40
−60 4020 X
80
60
Read Write
Y
20
40
60
80
100
50
150
100
200
Y
0X
−250 −200 −150 −100 −50 50 100 150 200
Read Write
Y
X
10
30
20
40
50
Y
X
Y
0 10203040X−50 −40 −30 −20 −10
Read Write
10
30
20
40
50
Y
X
Y
0 10203040X−50 −40 −30 −20 −10
Read Write
Read Write
Y
0
−80−100 −20
−40
−60 4020 X
80
60
20
40
60
80
100
010203040
X
−50 −40 −30 −20 −10
Read Write
10
30
20
40
50
Y
X
Y
V680 Series RFID System 27
2-kbyte Memory ID Tag
The values given for communications ranges are reference values. Refer to pages 21 to 22 for communications distance specifications. The
communications distance will depend on the ID Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation
completely when installing a system.
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66MT (mounted on metallic surface: steel)
V680-HS65 (mounted on metallic material) &
V680-D1K66MT (mounted on metallic surface: steel)
V680-H01-V2 (mounted on non-metallic material) &
V680-D1KP58HT (mounted on non-metallic material)
V680-HS52 (embedded in non-metallic material) &
V680-D2KF52M (embedded in non-metallic material)
V680-HS52 (embedded in non-metallic material) &
V680-D2KF52M (embedded in metallic surface: steel)
V680-HS51 (embedded in metallic material) &
V680-D2KF52M (embedded in non-metallic material)
V680-HS51 (embedded in metallic material) &
V680-D2KF52M (embedded in metallic surface: steel)
0 10203040
X
−50 −40 −30 −20 −10
Read Write
10
30
20
40
50
Y
X
Y
0
−80−100 −20
−40
−60 4020 X
80
60
Read Write
Y
20
40
60
80
100
0X
−250 −200 −150 −100 −50 50 100 150 200
Read Write
50
150
100
200
Y
X
Y
Ta g
V680-H01
0 102030405060X−70 −60 −50 −40 −30 −20 −10
Read Write
X
Y
10
30
20
40
50
60
Y
Read Write
0102030405060
X
−70 −60 −50 −40 −30 −20 −10
X
Y
10
30
20
40
50
60
Y
X
Y
0 10203040X−50 −40 −30 −20 −10
Read Write
10
30
20
40
50
Y
10
30
20
40
50
Y
X
Y
0 10203040X−50 −40 −30 −20 −10
Read Write
10
30
20
40
50
Y
28 V680 Series RFID System
V680-HS63 (mounted on non-metallic material) &
V680-D2KF52M (embedded in non-metallic material)
V680-HS52 (embedded in metallic material) &
V680-D2KF67 (mounted on non-metallic material)
V680-HS63 (mounted on non-metallic material) &
V680-D2KF67 (mounted on non-metallic material)
V680-HS65 (mounted on metallic material) &
V680-D2KF67 (mounted on non-metallic material)
V680-H01-V2 (mounted on non-metallic material) &
V680-D2KF67 (mounted on non-metallic material)
V680-HS52 (embedded in non-metallic material) &
V680-D2KF67M (mounted on metallic surface: steel)
V680-HS63 (mounted on non-metallic material) &
V680-D2KF67M (mounted on metallic surface: steel)
V680-HS65 (mounted on metallic material) &
V680-D2KF67M (mounted on metallic surface: steel)
Read Write
010 2030405060X−70 −60 −50 −40 −30 −20 −10
X
Y
10
30
20
40
50
60
Y
0 1020 3040 50 60X−70 −60 −50 −40 −30 −20 −10
Read Write
X
Y
10
30
20
40
50
60
Y
X
Y
10
30
20
40
50
60
Y
0102030405060 X−70 −60 −50 −40 −30 −20 −10
Read Write
0
−80−100 −20
−40
−60 4020 X
80
60
Read Write
10
30
20
40
50
60
80
70
90
Y
0 50 100 150 200 X−250 −200 −150 −100 −50
50
100
150
200
Y
Read Write
0102030405060X−70 −60 −50 −40 −30 −20 −10
X
Y
10
30
20
40
50
60
Y
X
Y
10
30
20
40
50
60
Y
0102030405060X−70 −60 −50 −40 −30 −20 −10
Read Write
10
30
20
40
50
60
80
70
90
Y
0
−80−100 −20
−40
−60 4020 X
80
60
Read Write
V680 Series RFID System 29
8-/32-kbyte Memory ID Tag
The values given for communications ranges are reference values. Refer to page 22 to 24 for communications distance specifications. The
communications distance will depend on the ID Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation
completely when installing a system.
V680-HS52 (embedded in non-metallic material) &
V680-D8KF67 (mounted on non-metallic material)
V680-HS63 (mounted on non-metallic material) &
V680-D8KF67 (mounted on non-metallic material)
V680-HS65 (mounted on metallic material) &
V680-D8KF67 (mounted on non-metallic material)
V680-H01-V2 (mounted on non-metallic material) &
V680-D8KF67 (mounted on non-metallic material)
V680-HS52 (embedded in non-metallic material) &
V680-D8KF67M (mounted on metallic surface: steel)
V680-HS63 (mounted on non-metallic material) &
V680-D8KF67M (mounted on metallic surface: steel)
V680-HS65 (mounted on metallic material) &
V680-D8KF67M (mounted on metallic surface: steel)
Read Write
0 1020 3040 5060X−70 −60 −50 −40 −30 −20 −10
10
30
20
40
50
60
Y
Read Write
0 1020 3040 5060X−70 −60 −50 −40 −30 −20 −10
10
30
20
40
50
60
Y
10
30
20
40
50
60
80
70
90
Y
0
−80−100 −20
−40
−60 4020 X
80
60
Read Write
0 50 100 150 200 X−250 −200 −150 −100 −50
50
100
150
200
Y
Read Write
0 1020 3040 5060X−70 −60 −50 −40 −30 −20 −10
10
30
20
40
50
60
Y
Read Write
0 1020 3040 5060X−70 −60 −50 −40 −30 −20 −10
10
30
20
40
50
60
Y
10
30
20
40
50
60
80
70
90
Y
0
−80−100 −20
−40
−60 4020 X
80
60
Read Write
30 V680 Series RFID System
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (mounted on non-metallic
material) (Horizontal-facing ID Tag)
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (mounted on non-metallic
material) (Vertical-facing ID Tag)
V680-HS63 (mounted on metallic material) & V680-D8KF68/
-D32KF68
Mounted on metallic surface: steel (Horizontal-facing ID
Tag) When the V680-A81 ID Tag Attachment is mounted.
V680-HS63 (mounted on metallic material) & V680-D8KF68/
-D32KF68
Mounted on metallic surface: steel (Vertical-facing ID Tag)
When the V680-A81 ID Tag Attachment is mounted.
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Horizontal-facing ID Tag)
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Vertical-facing ID Tag)
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 Flush-mounted on metallic
surface: steel (Horizontal-facing ID Tag) When the V680-
A81 ID Tag Attachment is mounted.
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 Flush-mounted on metallic
surface: steel (Vertical-facing ID Tag) When the V680-A81
ID Tag Attachment is mounted.
Read Write
X
10
20
30
40
50
60
70
Y
X
Y
0−80 −60 −50 −40 −30 −20 −10 10 20 30 40 50 60 70−70
Read Write
0−80 −60 −50 −40 −30 −20 −10 10 20 30 40 50 60 70−70 X
X
Y
10
20
30
40
50
60
70
Y
X0
−80 −60 −50 −40 −30 −20 −10 10 20 30 40 50 60 70−70
Read Write
10
20
30
40
50
60
70
Y
X
Y
10
20
30
40
50
60
70
Y
X
Y
X0−80 −60 −50 −40 −30 −20 −10 10 20 30 40 50 60 70−70
Read Write
0−120 −100 −80 −60 −40 −20 20 40 60 80 100 120 X
10
20
30
40
50
60
80
90
100
110
70
Y
X
Y
Read Write
10
20
30
40
50
60
80
90
100
110
70
Y
Y
X
Read Write
0−120 −100 −80 −60 −40 −20 20 40 60 80 100 120 X
10
20
30
40
50
60
80
90
100
110
70
Y
X
Y
Read Write
0−120 −100 −80 −60 −40 −20 20 40 60 80 100 120 X
Read Write
10
20
30
40
50
60
80
90
100
110
70
Y
Y
X
0−120 −100 −80 −60 −40 −20 20 40 60 80 100 120 X
V680 Series RFID System 31
V680-H01-V2 (mounted on non-metallic material) &
V680-D8KF68/-D32KF68 (Horizontal-facing ID Tag)
V680-H01-V2 (mounted on non-metallic material) &
V680-D8KF68/-32KF68 (Vertical-facing ID Tag)
0 50 100 150 200 X−250 −200 −150 −100 −50
50
100
150
200
Y
0 50 100 150 200 X−250 −200 −150 −100 −50
50
100
150
200
Y
32 V680 Series RFID System
Communications Time
Communications Time between Antennas and Tags
1-kbyte Memory ID Tag
V680-D1KP@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63A Amplifier Unit)
V680-D1KP58HT (used in combination with the V680-H01 Read/Write Antenna)
2-kbyte Memory ID Tag
V680-D2KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit)
8-/32-kbyte Memory ID Tag
V680-D8KF@@, V680-D32KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit)
2,500
2,000
1,500
1,000
500
0 200 400 600 800 1,000 1,200
B
y
tes
Read
Write (verify enabled)
Write
(verify
disabled)
● Transmission speed: Normal mode
2,000
1,600
1,200
800
400
1,800
1,400
1,000
600
200
0 200 400 600 800 1,000 1,200
B
y
tes
Read
Write (verify enabled)
Write
(verify
disabled)
● Transmission speed: High-speed mode
Transmission time (ms)
Transmission time (ms)
Note 1. The V680-H01 Read/Write Antenna cannot be
used in high-speed mode.
2. When multi-access or FIFO is selected as the
transmission option, the transmission time will
be the same as in normal mode even when the
transmission speed is set to high-speed mode.
Controller or
ID Sensor Unit
transmission
speed setting
Command Write
verification
setting
Transmission
time (ms)
N = Number of
processing
bytes
Normal mode Read --- T = 1.3N + 31
Write Enabled T = 2.1N + 58
Disabled T = 1.8N + 56
High-speed
mode
(See notes 1
and 2.)
Read --- T = 1.0N + 29
Write Enabled T = 1.8N + 51
Disabled T = 1.5N + 47
5,000
4,000
3,000
2,000
1,000
4,500
3,500
2,500
1,500
500
4,000
3,000
2,000
1,000
3,500
2,500
1,500
500
0 500 1,000 1,500 2,000 2,500
Read Read
500 1,000 1,500 2,000 2,5000
B
y
tes
Write (verify enabled)
Write (verify disabled)
● Transmission speed: Normal mode
B
y
tes
Write (verify enabled)
Write (verify disabled)
● Transmission speed: High-speed mode
Transmission time (ms)
Transmission time (ms)
Note: When multi-access or FIFO is selected as the
transmission option, the transmission time will be
the same as in normal mode even when the
transmission s
p
eed is set to hi
g
h-s
p
eed mode.
Controller or
ID Sensor Unit
transmission
speed setting
Command Write
verification
setting
Transmission
time (ms)
N = Number of
processing bytes
Normal mode Read --- T = 1.2N + 30
Write Enabled T = 2.4N + 49
Disabled T = 1.2N + 49
High-speed
mode (See
note.)
Read --- T = 0.9N + 27
Write Enabled T = 1.7N + 49
Disabled T = 0.9N + 41
3,000
2,000
1,000
3,500
2,500
1,500
500
2,000
1,000
2,500
1,500
500
0 500 1,000 1,500 2,000 2,500 500 1,000 1,500 2,000 2,5000
Read
Read
B
y
tes
Write (verify enabled)
Write
(verify
disabled)
● Transmission speed: Normal mode
B
y
tes
Write (verify enabled)
Write
(verify
disabled)
● Transmission speed: High-speed mode
Transmission time (ms)
Transmission time (ms)
Note: When multi-access or FIFO is selected as the
transmission option, the transmission time will be
the same as in normal mode even when the
transmission speed is set to high-speed mode.
Controller or
ID Sensor Unit
transmission
speed setting
Command Write
verification
setting
Transmission
time (ms)
N = Number of
processing bytes
Normal mode Read --- T = 1.3N + 30
Write Enabled T = 1.6N + 59
Disabled T = 1.3N + 50
High-speed
mode (See
note.)
Read --- T = 0.8N + 25
Write Enabled T = 1.1N + 41
Disabled T = 0.9N + 40
V680 Series RFID System 33
TAT When Using an ID Controller (Reference Values)
TAT (Turn Around Time)
TAT refers to the total time required from the point at which a host device (such as a personal computer) starts sending a command until a
response is received.
1-kbyte Memory ID Tag
V680-D1KP@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63A Amplifier Unit)
V680-D1KP58HT (used in combination with the V680-H01 Read/Write Antenna)
Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the
User's Manual.
2. The V680-H01 Read/Write Antenna cannot be used in high-speed mode.
3. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when
the transmission speed is set to high-speed mode.
4. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows:
Data length: 8 bits, Stop bits: 1, Parity: Odd.
In this example, communications are continuous, with no gaps between characters.
5. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code.
Controller or ID Sensor
Unit transmission
speed setting
Command Write verification
setting
Number of bytes to
processed (byte)
TAT (ms) (See note 1.)
Normal mode Read --- 100 173
256 389
512 747
1,000 1,431
Write Enabled 100 280
256 621
512 1,184
1,000 2,258
Disabled 100 248
256 542
512 1,028
1,000 1,956
High-speed mode
(See notes 2 and 3.)
Read --- 100 141
256 310
512 591
1,000 1,129
Write Enabled 100 243
256 537
512 1,023
1,000 1,951
Disabled 100 209
256 456
512 865
1,000 1,647
TAT = Command send time + ID Tag transmission time + response receipt time
Command send time: This is the time required for sending a command from the host
device to the Controller.
It varies depending on the communications speed and format.
ID Tag transmission time: This is the time required for transmission between the Read/Write
Antenna and the ID Tag.
Response receipt time: This is the time required for returning a response from the
Controller to the host device.
It varies depending on the communications speed and format.
RDA1 · · · · *CR
Response
TAT
RD001234 · · · *CR
ID Tag
transmission time
(Command)
For an ordinary command
34 V680 Series RFID System
2-kbyte Memory ID Tag
V680-D2KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit)
Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the
User's Manual.
2. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when
the transmission speed is set to high-speed mode.
3. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows:
Data length: 8 bits, Stop bits: 1, Parity: Odd.
In this example, communications are continuous, with no gaps between characters.
4. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code.
Controller or ID Sensor
Unit transmission
speed setting
Command Write verification
setting
Number of bytes to
processed (byte)
TAT (ms) (See note 1.)
Normal mode Read --- 100 162
256 363
512 695
1,000 1,330
2,000 2,620
Write Enabled 100 301
256 689
512 1,328
1,000 2,549
2,000 5,039
Disabled 100 181
256 382
512 714
1,000 1,349
2,000 2,639
High-speed mode
(See note 2.)
Read --- 100 132
256 286
512 541
1,000 1,030
2,000 2,020
Write Enabled 100 231
256 510
512 970
1,000 1,849
2,000 3,639
Disabled 100 143
256 297
512 552
1,000 1,041
2,000 2,031
V680 Series RFID System 35
8-/32-kbyte Memory ID Tag
V680-D8KF@@, V680-D32KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit)
Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the
User's Manual.
2. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when
the transmission speed is set to high-speed mode.
3. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows:
Data length: 8 bits, Stop bits: 1, Parity: Odd.
In this example, communications are continuous, with no gaps between characters.
4. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code.
Controller or ID Sensor
Unit transmission
speed setting
Command Write verification
setting
Number of bytes to
processed (byte)
TAT (ms) (See note 1.)
Normal mode Read --- 100 172
256 388
512 746
1,000 1,430
2,000 2,820
Write Yes 100 231
256 494
512 929
1,000 1,759
2,000 3,449
No 100 192
256 408
512 766
1,000 1,450
2,000 2,840
High-speed mode
(See note 2.)
Read --- 100 117
256 255
512 485
1,000 925
2,000 1,815
Write Yes 100 163
256 348
512 655
1,000 1,241
2,000 2,431
No 100 142
256 296
512 551
1,000 1,040
2,000 2,030
36 V680 Series RFID System
Safety Precautions
Note: This catalog is intended only to help select the appropriate
product. Be sure to read the User's Manual for usage
precautions prior to using the product.
To ensure safety, be sure to follow the following precautions:
1. Do not operate this product in any flammable, explosive, or corro-
sive gas environment.
2. Do not disassemble, repair, or remodel this product.
3. Tighten the base lock screws and terminal block screws com-
pletely.
4. Be sure to use wiring crimp terminals of the specified size.
5. If any cable has a locking mechanism, be sure to check that it has
been locked before using it.
6. The DC power supply must be within the specified rating (24 VDC
+10%/15%).
7. Do not reverse the power supply connection.
8. Do not insert water, wire, etc., into any of the gaps in the case.
Doing so may cause fire or electric shock.
9. Turn OFF the Controller or ID Sensor Unit power before attaching
or removing the Read/Write Antenna.
10.In the event that the product exhibits any abnormal condition,
immediately stop using the system, turn OFF the power, and con-
tact your OMRON sales representative.
11.Dispose of this product as industrial waste.
12.Be sure to follow any other warnings, cautions, and notices given
in this document.
Please observe the following precautions to prevent failure to
operate, malfunctions, or undesirable effects on product
performance.
Installation Site
Install the product at a location where:
•It is not exposed to corrosive gases, dust, metal chips, or salt.
•The ambient operating temperature is within the range stipulated in
the specifications.
•There are no sudden variations in temperature (no condensation).
•The ambient operating humidity is within the range stipulated in the
specifications.
•No vibration or shock exceeding the values stipulated in the
specifications is transmitted directly to the body of the product.
•It is not subject to splashing water, oil, or chemical substances.
Installation
•The product uses the 13.56-MHz frequency band to communicate
with ID Tags. Some devices, such as some motors, inverters, and
switching power supplies, generate electromagnetic waves (i.e.,
noise) that can affect communications with ID Tags. If any of these
devices are nearby, communications with ID Tags may be affected
or ID Tags may be destroyed. If the product is to be used near such
devices, check the effects on communications before using the
product.
•To minimize the general influence of noise, observe the following
precautions:
1. Ground any metallic material located around this device to
100 : or less.
2. Keep the product away from high voltage and heavy current.
•Do not use products that are not waterproof in misty environments.
•Do not subject the products to chemicals that adversely affect
product materials.
•When installing the product, tighten screws to the following torque:
Controller: 1.2 N·m max.
ID Sensor Unit: 0.4 N·m
V680-HS51 Read/Write Antenna: 6 N·m
V680-HS52 Read/Write Antenna: 40 N·m
V680-HS63 Read/Write Antenna: 1.2 N·m
V680-HS65 Read/Write Antenna: 1.2 N·m
(Attach the enclosed Mounting Brackets)
V680-D1KP66T/-D1KP66MT: 0.5 N·m
V680-D1KP66T-SP: 1.2 N·m
V680-D1KP54T: 0.3 to 0.5 N·m
V680-D2KF67/-D2KF67M: 0.6 N·m
V680-D8KF67/-D8KF67M: 0.6 N·m
V680-D8KF68/-D32KF68: 1.2 N·m
•When Read/Write Antennas are mounted side-by-side, mutual
interference may reduce the transmission performance. Refer to
the RFID System Amplifier and Antennas/ID Tags User's Manual to
mount them in a way that will prevent mutual interference.
Storage
Store the product at a location where:
•It is not exposed to corrosive gases, dust, metal chips, or salt.
•The ambient storage temperature is within the range stipulated in
the specifications.
•There are no sudden variations in temperature (no condensation).
•The ambient storage humidity is within the range stipulated in the
specifications.
•No vibration or shock exceeding the values stipulated in the
specifications is transmitted directly to the body of the product.
•It is not subject to splashing water, oil, or chemical substances.
Cleaning
Do not use thinner, benzene, acetone, or kerosene for cleaning.
Using these substances may dissolve the resin material and the
case.
Do not use this product as a detection device to protect
people.
Precautions for Safe Use
Precautions for Correct Use
WARNING
V680 Series RFID System 37
Dimensions
Note: All units are in millimeters unless otherwise indicated.
ID Tag
R0.2
8
5 0
−0.1
0
−0.1 dia.
V680-D1KP52MT/-D2KF52M
Case material PPS resin
Filling Epoxy resin
V680-D1KP53M
Case material PPS resin
Filling Epoxy resin
C0.5
10 dia.
6-R0.8
4.5
2.7±0.1
1.1
16 dia.
20dia.
V680-D1KP54T
Case material PPS resin
4-R4
32
34
4-R3
32
34
Two, M3
25±0.2
25±0.2
Tw o,
6 dia. 3.5±0.1
25±0.2
25±0.2
Mounting Hole Dimensions
Tw o,
3.5 dia.
V680-D1KP66T/-D1KP66MT
Case material PPS resin
4-R6
1.3
6.5 2.5 max.
Two, M5
80±0.2
80±0.2
34
95
34
36.5
Two, 5.5 dia.
(mounting holes)
Mounting Hole Dimensions
V680-D1KP66T-SP
Case material PFA resin
V680-D2KF67/-D2KF67M
8
8
5.2
13.2
16
16
40+0.1
−0.5
16 16
Two, 3.5-dia.
mounting holes
2
4.5
5.2 8
8
13.2
Mounting reference
surface
32±0.2
32±0.2
Two, M3
0.2
Mounting Hole Dimensions
40+0.1
−0.5
Case material PBT resin
Filling Epoxy resin
8
8
5.2
13.2
16
16
40+0.1
−0.5
16 16
Two, 3.5-dia.
mounting holes
2
4.5
5.2 8
8
13.2
Mounting reference
surface
32±0.2
32±0.2
Two, M3
0.2
Mounting Hole Dimensions
40+0.1
−0.5
V680-D8KF67/-D8KF67M
Case material PBT resin
Filling Epoxy resin
76
44
Two, M4
Mounting Hole Dimensions
44±0.2
54
10 10
Two, 4.5 dia.
mounting holes
76±0.2
86
10
5
V680-D8KF68/-D32KF68
Case material PBT resin
Filling Epoxy resin
10±0.2
5°
14 dia.
2-R2
80 dia.
60 dia.
5°
Coating PPS resin
V680-D1KP58HT
38 V680 Series RFID System
Read/Write Antenna with Detachable Amplifier Unit
30 50 37
Insulated cover
5.5-dia. coaxial cable
Ferrite core
Connector
16.5 dia.
16.5 dia.
65
47.6
57
50
7
35 dia.
22.5 dia.
Two toothed washers
Two mounting nuts
Operation
indicator
M22 × 1
30
14.5 dia.
19.8 dia.
Mounting Hole Dimensions
V680-HS52-W
Case material Brass
Transmission surface PBT resin
Filling Epoxy resin
Cable PVC
30 50
16.5 dia.
16.5 dia.
65
47.6
57
50
7
19.8 dia.
20
14.5 dia.
10
35 dia.
22.5 dia.
30
Insulated cover
5.3-dia. coaxial cable
Ferrite core
Connector
Two toothed washers
Two mounting nuts
Operation
indicator
M22 × 1
Mounting Hole Dimensions
V680-HS52-R
Case material Brass
Transmission surface PBT resin
Filling Epoxy resin
Cable PVC
12.5 dia.
21 dia.
17
Toothed washer
Two mounting
nuts
7
15
24
33
25 50
Ferrite core
26.2
Coaxial cable, 2.9 dia., Standard length: 2 m
35
9.6 dia.
12
(14.5 dia.) (16.8 dia.)
Insulated cover
Ferrite core
Connector
M12 × 1
Mounting Hole Dimensions
V680-HS51
Case material Brass
Transmission surface ABS resin
Filling Epoxy resin
Cable PVC
Center of coil
Two, M4 or 4.5 dia.
Operation indicator
5.5-dia. coaxial cable
Ferrite core
Connector
Mounting Hole Dimensions
30 50 37
Insulated cover
23
5
11
5
40
28
±0.1
53 27 6
14.5 dia.
16.5 dia. 16.5 dia.
V680-HS63-W
Case material ABS resin
Filling Epoxy resin
Cable PVC
5
5
40
28
±0.1
53
27 6
23
30 50 20
16.5 dia.
14.5 dia.
11
10
16.5 dia.
Center of coil
Two, M4 or 4.5 dia.
Operation indicator
5.3-dia. coaxial cable
Ferrite core
Connector
Mounting Hole Dimensions
Insulated cover
V680-HS63-R
Case material ABS resin
Filling Epoxy resin
Cable PVC
Operation
indicator
14
90±0.2
100
50
20
30
100
90±0.2
50
5
5
50
30
5.5-dia. coaxial cable
16.5 dia.
Ferrite core
37
Bushing
25
Four, 4.5-dia.
(Mounting holes)
10
11
10
Insulated cover
Connector
16.8 dia.
14.5 dia.
V680-HS65-W
Case material ABS resin
Filling Epoxy resin
Cable PVC (gray)
V680 Series RFID System 39
Read/Write Antenna with Built-in Amplifier Unit
Amplifier Unit
Operation
indicator
100
90±0.2
50
5
5
90±0.2
100
50
Bushing
25
10
10
30
14
Four, 4.5-dia.
(Mounting holes)
11
20
5030
5.3-dia. coaxial cable Insulated cover
16.5 dia.
Ferrite core
(39.5) Connector
14.5 dia. 16.8 dia.
V680-HS65-R
Case material ABS resin
Filling Epoxy resin
Cable PVC (black)
Connector
Ferrite core
5.8-dia. vinyl-insulated round cable
(2 conductors: 41/0.16 dia.,
8 conductors: 17/0.08 dia.)
Standard length: 0.5 m
Coil core
Mounting Hole Dimensions
Four, M4 or 4.5 dia.
185
±0.2
7.5
(45)
(17)
14
20 dia.
12 operation indicators (LEDs)
Transmission surface
Transmission surface
6
30 38
(25 dia.)
Setting switch cover
13.5
(1)
40
142.5
65
50
250
142.5
235
500 0
+50
64.8
200
185
Four, 5-dia. (Mounting holes)
235
±0.2
4 mounting brackets
(enclosed)
V680-H01-V2
Case material PC/ASA resin
Filling Aluminum
Cable PVC
13.7 65 18 51
36
15 dia.
40
25
9.5 dia.
25
3.5
12.8 dia.
15 35.6
25 5.8-dia. vinyl-insulated round cable
(2 conductors: 41/0.16 dia., 8 conductors: 17/0.08 dia.)
Connector
Connector
Operation indicator
V680-HA63A/-HA63B
Case material PC resin
Filling Epoxy resin
Cable PVC
40 V680 Series RFID System
ID Controller
ID Sensor Units
Handheld Reader Writer
Two, M4
80
±0.2
18
17.5
95
±0.2
7.5
90
(80)
65
80
5
5
Two, 4.5-dia.
(Mounting holes) 105
95
Mounting Hole Dimensions
V680-CA5D01-V2/-CA5D02-V2
CJ1W-V680C11
65
31
4.5
(140)
4.7
Six operation indicators
Switches
Connector
90
2.7
2.7
18.1
17.3
01
Connector
Switches
Six operation indicators
123
(193)
101
130
35
CS1W-V680C11
4.5
4.7
Eight operation indicators
Switches
Connectors
(140)
90
2.7
24.5
18.1
17.3
2.7 31
65
CJ1W-V680C12 CS1W-V680C12
01
35
Connectors
Terminals
Switches
Eight operation indicators
123
(193)
101
15
With cover
mounted: 16.5
130
51
25
3.6 8
Dimension L
1900
800 60
60
11
23
45 Operation indicator
Activate switch
65
25.5
3.8-dia. vinyl-insulated round cable
Standard length: 0.8 or 1.9 m
L
160.5
10.5
23
Antenna
33
Ferrite core
V680-CHUD
Case material ABS resin
Nameplate material PET resin
V680 Series RFID System 41
AC Adapter
Handheld Terminal (Recommended)
Activate switch
Reset button
25.5
23
48
65
45
10.5
Antenna
33
Ferrite core
3.8-dia. vinyl-insulated round cable
Standard length: 2.5 m
Connector
Connector
1.8-dia. × 2 vinyl-insulated flat cable
Standard length: 0.19 m
13 dia.
2500±60
24.99 32.2
190±20
160.5
45
23
44.9
Operation indicator
11
V680-CH1D
Case material ABS resin
Nameplate material PET resin
Operation indicator
Activate switch
Antenna
Reset button
11
48
65
45
23 25.5
10.5
23
Ferrite core
3.8-dia. vinyl-insulated round cable
Standard length: 2.5 m
Connector
33
160.5 44.9
800
+50
−110
32.224.99
V680-CH1D-PSI
Case material ABS resin
Nameplate material PET resin
V600-A22
unifibe.comunifibe.com
33
45.5
1800
4.1 dia.
9.5 ± 0.3
23.5
210
100 42
Recommended Handheld Terminal
Psion Teklogix model 7527S-G2-@@-S
(V680-A-7527S-G2-@@-S)
42 V680 Series RFID System
Accessories
25±0.2
25±0.2
25±0.2 25±0.2
15
34
37
15
3437 16
4
10
3.5
Two, 4-dia.
4-R5.5
Two, M3
Mounting Hole Dimension
s
V680-D1KP66T Attachments
V600-A86 Holder
Case material PPS resin
76
44
Two, M4
Mounting Hole Dimensions
44±0.2
54
Two, 4.5-dia.
mounting holes
76±0.2
86
10
V680-D8KF68/-D32KF68 Attachments
V600-A81 Holder
Case material PBT resin
Filling Epoxy resin
Mounting Hole Dimension
s
M12
M12
40
17
50
110
20 dia.
11.5
15
3.2 dia.
12 dia.
V680-D1KP58HT Attachments
V680-A80
40
22
58
Two, 6-dia
20-dia + 0.05
Two, 3.5-dia
1
31
± 0.1
22
1.5
3.5
V680-D1KP54T Attachments
V700-A80
51 L1±100 (See note.) 49
Connector to ID Controller
Connection label
Connector to Amplifier Unit
6 dia
15 dia 15.5 dia
Amplifier Unit Special Extension Cable
V700-A40 2M.
V700-A41 3M.
V700-A42 5M.
V700-A43 10M.
V700-A44 20M.
V700-A45 30M.
Note: The model numbers for each
length (L1) are as follows:
Model Length L1
V700-A40 2M. 2,000
V700-A41 3M. 3,000
V700-A42 5M. 5,000
V700-A43 10M. 10,000
V700-A44 20M. 20,000
V700-A45 30M. 30,000
Material PVC
20 dia. 15.5 dia.
41.8 L1 ±100 (See note.) 49
6-dia. vinyl-insulated
round cable
Connector to R/W Head
Connector to ID Controller
Connection label
V680-H01 Special Cables
V700-A40-W 2M
V700-A40-W 5M
V700-A40-W 10M
V700-A40-W 20M
V700-A40-W 30M
Note: The model numbers for each
length (L1) are as follows:
Model Length L1
V700-A40-W 2M 2,000
V700-A40-W 5M 5,000
V700-A40-W 10M 10,000
V700-A40-W 20M 20,000
V700-A40-W 30M 30,000
Material PVC
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change with-
out notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importa-
tion, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liabil-
ity and in addition to other remedies) cancel any unshipped portion of Prod-
ucts sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall
constitute delivery to Buyer;
c. All sales and shipments of Products shall be FOB shipping point (unless oth-
erwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security inter-
est in the Products until the full purchase price is paid;
d. Delivery and shipping dates are estimates only; and
e. Omron will package Products as it deems proper for protection against nor-
mal handling and extra charges apply to special conditions.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-
gation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsi-
ble for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were prop-
erly handled, stored, installed and maintained and not subject to contamina-
tion, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Compa-
nies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://www.omron247.com or contact your Omron representative for pub-
lished information.
14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or set-
tle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
16. Property; Confidentiality. Any intellectual property in the Products is the exclu-
sive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
17. Export Controls. Buyer shall comply with all applicable laws, regulations and
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law princi-
ples). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability
. If any provi-
sion hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Compa-
nies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
Omron will provide applicable third party certification documents identifying
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Prod-
uct in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equip-
ment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or prop-
erty. Please know and observe all prohibitions of use applicable to this Prod-
uct.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-
ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Omron Companies shall not be responsible for the
user’s programming of a programmable Product, or any consequence thereof.
3. Performance Data. Data presented in Omron Company websites, catalogs
and other materials is provided as a guide for the user in determining suitabil-
ity and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application require-
ments. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
5. Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
Q151-E1-06 04/10 Note: Specications are subject to change. © 2010 Omron Electronics LLC
OMRON CANADA, INC. • HEAD OFFICE
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
OMRON ELECTRONICS MEXICO SA DE CV • HEAD OFFICE
OMRON ARGENTINA • SALES OFFICE
OMRON CHILE • SALES OFFICE
OTHER OMRON LATIN AMERICA SALES
OMRON ELECTRONICS LLC • THE AMERICAS HEADQUARTERS
OMRON EUROpE B.V.
