PTR060V0017-TR - EATON - Datasheet.Directory

60 Volt DC Radial Leaded, PolyTron™ PTC Devices

PolyTron™PTR060V Series

0111 BU-SB11020 Page 1 of 4 Data Sheet 4401

Radial Leaded Device

Description

• PolyTron™ radial leaded thru-hole PTC device

• Maximum 60 volts

• Current ratings from 0.10 to 3.75 amps

• Fast time-to-trip

• Low resistance

• Halogen free

• Lead free

• RoHS compliant

Notes: Ihold – Hold current: Maximum current device will pass without interruption in 23°C still air.

Itrip – Trip current: Minimum current that will switch the device from low resistance to high resistance in 23°C still air.

Vmax: Maximum continuous voltage device can withstand without damage at rated current.

Imax: Maximum fault current device can withstand without damage at rated voltage.

Pd: Power dissipated from device when in the tripped state in 23°C still air.

Ri(min.): Minimum resistance of device as supplied at 23°C unless otherwise specified.

Ri(max.): Maximum resistance of device as supplied at 23°C unless otherwise specified.

R1(max.): Maximum resistance of device when measured one hour post reflow (SMD) or one hour post trip (radial-leaded device) at 23°C unless otherwise specified.

Specifications

Ihold Itrip PdTime to Resistance (Ω) Agency

Catalog Vmax Imax @23°C @23°C Typ. Trip (Max.) Initial (Ri) Post Trip (R1) Information

Number (Vdc) (Amps) (Amps) (Amps) (W) (Amps) (Sec) Min. Max. Max. cURus TUV

PTR060V0010 60 40 0.10 0.20 0.38 0.50 4.0 2.500 4.500 7.50 X X

PTR060V0017 60 40 0.17 0.34 0.48 0.85 3.0 3.300 5.210 8.00 X X

PTR060V0020 60 40 0.20 0.40 0.41 1.00 2.2 1.830 2.750 4.40 X X

PTR060V0025 60 40 0.25 0.50 0.45 1.25 2.5 1.250 1.950 3.00 X X

PTR060V0030 60 40 0.30 0.60 0.49 1.50 3.0 0.880 1.330 2.10 X X

PTR060V0040 60 40 0.40 0.80 0.56 2.00 3.8 0.550 0.860 1.29 X X

PTR060V0050 60 40 0.50 1.00 0.77 2.50 4.0 0.500 0.770 1.17 X X

PTR060V0065 60 40 0.65 1.30 0.88 3.25 5.3 0.310 0.480 0.72 X X

PTR060V0075 60 40 0.75 1.50 0.92 3.75 6.3 0.250 0.400 0.60 X X

PTR060V0090 60 40 0.90 1.80 0.99 4.50 7.2 0.200 0.310 0.47 X X

PTR060V0110 60 40 1.10 2.20 1.50 5.50 8.2 0.150 0.250 0.38 X X

PTR060V0135 60 40 1.35 2.70 1.70 6.75 9.6 0.120 0.190 0.30 X X

PTR060V0160 60 40 1.60 3.20 1.90 8.00 11.4 0.090 0.140 0.22 X X

PTR060V0185 60 40 1.85 3.70 2.10 9.25 12.6 0.080 0.120 0.19 X X

PTR060V0250 60 40 2.50 5.00 2.50 12.50 15.6 0.050 0.080 0.13 X X

PTR060V0300 60 40 3.00 6.00 2.80 15.00 19.8 0.040 0.060 0.10 X X

PTR060V0375 60 40 3.75 7.50 3.20 18.75 24.0 0.030 0.050 0.08 X X

Agency Information

• cURus: Recognized Card: File E343021 (Ihold 0.1-3.75A)

• TUV File: J 50194729

Part Number System/Ordering

PT R 060V 0160 -TR

PolyTron™ PTC Device Series

Radial Leaded

Maximum Voltage

Current Holding (Ihold)

Tape and Reel Packaging and Lead Type Code

Lead Codes: TR & BK - Straight Leads, TR1 & BK1 - Kinked Leads

TR & TR1 On Reels BK & BK1 In Poly Bags

• 0.10, 0.20-0.40A - 3000 devices • 0.10-0.25A - 1000 devices

• 0.17 - 2,500A devices • 0.30-1.85A - 500 devices

• 0.50-0090A - 2000 devices • 2.50-3.75A - 250 devices

• 1.10-1.85A - 1500 devices

• 2.50-3.75A - 1000 devices

Applications

• Medical equipment • White goods

• Industrial power transmission • Telecommunications

• Computers and peripherals • Consumer and automotive electronics

• Rechargeable battery packs

HALOGEN

FREE

0111 BU-SB11020 Page 2 of 4 Data Sheet 4401

Style 1

Style 2

Dimensions - mm

B Max Figure/

Lead Type Lead Style

Part A Straight Kink D E Straight Kink

Number Max. (-TR) (-TR1) C Min. Max. F TR TR1

PTR060V0010 7.4 12.7 12.7 5.0±0.8 7.6 3.0 0.5±0.02 2 1

PTR060V0017 7.4 12.7 12.7 5.0±0.8 7.6 3.0 0.5±0.02 2 1

PTR060V0020 7.4 12.2 12.2 5.0±0.8 7.6 3.0 0.5±0.02 2 1

PTR060V0025 7.4 12.7 12.7 5.0±0.8 7.6 3.0 0.5±0.02 2 1

PTR060V0030 7.4 13.0 13.0 5.0±0.8 7.6 3.0 0.5±0.02 2 1

PTR060V0040 7.6 13.5 13.5 5.0±0.8 7.6 3.0 0.5±0.02 2 1

PTR060V0050 7.6 13.7 13.7 5.0±0.8 7.6 3.0 0.5±0.02 2 1

PTR060V0065 9.7 14.5 14.5 5.0±0.8 7.6 3.0 0.5±0.02 2 1

PTR060V0075 10.4 15.2 15.2 5.0±0.8 7.6 3.0 0.5±0.02 2 1

PTR060V0090 11.7 15.7 15.7 5.0±0.8 7.6 3.0 0.5±0.02 2 1

PTR060V0110 13.0 18.0 18.0 5.0±0.8 7.6 3.0 0.8±0.02 2 1

PTR060V0135 14.5 19.6 19.6 5.0±0.8 7.6 3.0 0.8±0.02 2 1

PTR060V0160 16.3 21.3 21.3 5.0±0.8 7.6 3.0 0.8±0.02 2 1

PTR060V0185 17.8 22.9 22.9 5.0±0.8 7.6 3.0 0.8±0.02 2 1

PTR060V0250 21.3 26.4 26.4 10.0±0.8 7.6 3.0 0.8±0.02 2 1

PTR060V0300 24.9 30.0 30.0 10.0±0.8 7.6 3.0 0.8±0.02 2 1

PTR060V0375 28.4 33.5 33.5 10.0±0.8 7.6 3.0 0.8±0.02 2 1

Time-to-Trip Curves at 23°C

0.001

0.01

0.1

100

1000

0.1 1 10 100

TIME IN SECONDS

Fault Current (A)

A:PTR060V0010

B:PTR060V0017

C :PTR060V0020

D :PTR060V0025

E:PTR060V0030

F :PTR060V0040

G :PTR060V0050

H :PTR060V0065

I:PTR060V0075

J :PTR060V0090

K:PTR060V0110

L:PTR060V0135

M :PTR060V0160

N :PTR060V0185

O :PTR060V0250

P:PTR060V0300

Q :PTR060V0375

A B C D E F G H I J K L M N O P Q

0111 BU-SB11020 Page 3 of 4 Data Sheet 4401

Recommended Wave Solder Profile.

Material Composition

• Lead material:

- PTR060V0010-PTR060V0040 Tin-plated copper clad steel

- PTR060V0050-PTR060V0375 Tin-plated copper

• Insulating material: Cured epoxy resin meeting UL 94V0 requirements

Note 1

Note 3

Note 2

CoolingSoldering

130 ± 200°C

Tamb

Time

Temperature

Preheating

30~90sec <1sec <10sec

260°C max

0.0

20.0

40.0

60.0

80.0

100.0

120.0

140.0

160.0

180.0

-40-20 0 20406080

Percentage of Derated Current

Tem perature (°C)

Thermal Derating Curve

Recommended Reworking Conditions with Soldering Iron

• Soldering Iron Tip Temperature: 360°C max.

• Solder Time: 3 seconds max.

• Distance from Thermistor: 2mm min.

Notes:

1. (1-3)°C/sec

2. Approximately 200°C/sec

3. 5°C/sec Maximum

Environmental Specifications

Characteristic Value

Operating Temperature Range -40°C to +85°C

Surface Temperature Trip State 125°C max.

Thermal Shock +85°C to -40°C , 10 cycles,

5% typical resistance change

Solvent Resistance MIL-STD-202 Method 215, no change

Humidity Age Test +85°C, 85% R.H., 1000 hours

±5% typical resistance change.

Specified temperature (23°C ± 3°C)

Storage Temperature Range -10°C to +40°C

Storage Duration One year

Storage Relative Humidity <_75%

Storage Conditions Keep away from corrosive atmosphere and sunlight

www.cooperbussmann.com

0111 BU-SB11020 Page 4 of 4 Data Sheet 4401

The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is

intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change

design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information con-

tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

Life Support Policy: Cooper Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life sup-

port systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result

in significant injury to the user.

Packaging/Taping Specifications

IEC Dimension Tolerance

Description Mark (mm) (mm)

Sprocket hole pitch P0 12.7 0.3

Ordinate to adjacent component lead

PTR060V0010~PTR060V0090 P13.6 ±1.0

Ordinate to adjacent component lead

PTR060V0110~PTR060V0185 P13.45 ±1.0

Ordinate to adjacent component lead

PTR060V0250~PTR060V0300 P17.3 ±1.0

Device pitch PTR060V0010~PTR060V0090 P 12.7 ±1.0

Device pitch PTR060V0110~PTR060V0300 P 25.4 ±1.0

Device pitch PTR060V0375 P 38.1 ±1.0

Lead spacing C * --

Carrier tape width W 18 ±1.0

Top distance between tape edges W03.0 Max.

Hold-down tape width W112 ±1.0

Sprocket hole position W29.0 +0.75/-0.5

Abscissa to top PTR060V0010~PTR060V0090 H132.2 Max.

Abscissa to top PTR060V0110~PTR060V0300 H147.5 Max.

Abscissa to plane (straight lead) H 18.0 +2/-0

Abscissa to plane (kinked lead) H016.0 ±0.5

Sprocket hole diameter D04 ±0.2

Lead protrusion L11 Max.

Tape thickness t 0.9 Max.

Body lateral deviation Δh 0 ±1.0

Body tape plane deviation Δp 0 ±1.3

Reel width W356 Max.

Reel diameter 340 ±10

Arbor hole diameter n031 ±1

Core diameter n 80 Min.

* See Dimensions table.

Figure 2 - PTR060V0250-PTR060V0375

Figure 1 - PTR060V0010-PTR060V0185

Reel Specifications