UNISONIC TECHNOLOGIES CO., LTD
MPSA13 NPN EPITAXIAL SILICON TRANSISTOR
12www.unisoniC.Com.tw 1 of 2
Copyright © 2011 UnisoniC TeChnologies Co., LTD QW-R208-001.Ca
DARLINGTON TRANSISTOR
DESCRIPTION
The UTC MPSA13 is a Darlington transistor.
FEATURES
* Collector-Emitter Voltage: VCES = 30V
ORDERING INFORMATION
Order Number Pin Assignment
Normal Lead Free Halogen Free Package 1 2 3 Packing
MPSA13-AB3-R MPSA13L-AB3-R MPSA13G-AB3-R SOT-89 E C B Tape Reel
MPSA13-T92-B MPSA13L-T92-B MPSA13G-T92-B TO-92 E B C Tape Box
MPSA13-T92-K MPSA13L-T92-K MPSA13G-T92-K TO-92 E B C Bulk
Note: Pin assignment: E: EMITTER, C: COLLECTOR, B: BASE
MPSA13 NPN EPITAXIAL SILICON TRANSISTOR
UNISONIC TECHNOLOGIES CO., LTD 2 of 2
www.unisoniC.Com.tw QW-R208-001.Ca
ABSOLUTE MAXIMUM RATING (Ta=25℃, unless otherwise specified)
PARAMETER SYMBOL RATINGS UNIT
Collector-Base Voltage VCBO 30 V
Collector-Emitter Voltage VCES 30 V
Emitter-Base Voltage VEBO 10 V
Collector Current IC 500 mA
Collector Dissipation PC 625 mW
Junction Temperature TJ 125 ℃
Storage Temperature TSTG -40 ~ +150 ℃
Note: 1. Absolute maximum ratings are those values beyond which the device Could b e perman ently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
ELECTRICAL CHARACTERISTICS (Ta=25℃, unless otherwise specified)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
Collector-Emitter Breakdown Voltage BVCES IC=100μA, IB=0 30 V
Collector Cut-Off Current ICBO V
CB=30V, IE=0 100 nA
Emitter Cut-Off Current IEBO V
EB=10V, IC=0 100 nA
DC Current Gain hFE V
CE=5V, IC=100mA 10000
Collector-Emitter Saturation Voltage VCE(SAT) IC=100mA, IB=0.1mA 1.5 V
Base-Emitter on Voltage VBE(ON) VCE=5V, IC=100mA 2.0 V
Current Gain Bandwidth Product fT V
CE=5V, IC=10mA, f=100MHz 125 MHz
Note: Pulse test: Pulse Width<300μs, Duty Cycle=2%
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
m alfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believ ed to be accurate
and reliable and m ay be changed without notice.
