PANEL SWITCHES - SW 11 17 ZL ZL series Subminiature toggle switches * metal bushing DISTINCTIVE FEATURES O 4.83 mm threaded bushing Solder lug and straight PC terminals ENVIRONMENTAL SPECIFICATIONS * Operating temperature : -30 C to +85 C (-22 F to +185 F) * Moisture : 21 days 95 % (NFC 20-603 - IEC 8-2-3) ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : - gold plated contacts : 0.4 VA 20 V max. AC or DC - silver plated contacts : 0.5 A 48 V max. AC or DC * Minimum load : 10 mA 50 mV - 10 A 5 VDC * Contact resistance : 20 m max. * Insulation resistance : 1,000 M min. at 500 VDC * Dielectric strength: 1,000 Vrms 50 Hz min. between terminals and frame, 500 Vrms 50 Hz min. between terminals * Electrical life at full load : Contacts Number of cycles 2 positions 3 positions Gold plated 60,000 30,000 Silver plated 20,000 10,000 GENERAL SPECIFICATIONS * Strength of terminals : pull-out force 10 N max. * Torque : 1 Nm max. applied between the 2 nuts * Max. panel thickness : 1.5 mm (.059) with 2 nuts The company reserves the right to change specifications without notice. 1 Subminiature toggle switches * metal bushing PANEL CUT-OUT MATERIALS * Case : thermoplastic UL94-V0 WITH FLAT * Actuator : brass, nickel plated O4.90 (.193 DIA) * Bushing : zamac, tin plated * Contacts and terminals : 0 : brass, gold plated (standard) 1 : brass, silver plated 3 : brass, gold plated (1.27 micron gold) * Terminal seal : epoxy TERMINALS 0.75 (.029) 3.30 (.129) 0.70 (.027) Straight P0 ELECTRICAL FUNCTIONS 1 3 Function 1 2 O2.40 (.094 DIA) 6.10 (.240) 1 2 3 Other function 4.39 (.172) O4.90 (.193 DIA) 4.50 (.177) 0.60 (.024) * Wave soldering : 260 C (500 F) max. for 5 seconds max. 0.76 (.030) O4.90 (.193 DIA) * Hand soldering : 280 C (536 F) max. for 5 seconds max. Solder lug S0 4.50 (.177) 4.39 (.172) SOLDERING 1.50 (.059) O4.90 (.193 DIA) WITH KEYWAY 1.50 (.059) PANEL SWITCHES ZL series O2.40 (.094 DIA) 6.10 (.240) Subminiature toggle switches * metal bushing BUILD YOUR PART NUMBER BASIC PART NUMBER ZL NUMBER OF POLES SERIES 3 ELECTRICAL FUNCTIONS Single pole TERMINALS 1 ON - OFF S0 Solder lug 6 ON - ON P0 Straight PC 9 ON OFF ON 7 MOM OFF MOM 8 ON OFF MOM 2 ON - MOM OPTIONS CONTACT AND TERMINAL MATERIALS MODELS BUSHINGS 0 Brass, gold plated 01 Threaded, with flat 1 Brass, silver plated 02 Threaded, with keyway 3 Brass, gold plated (1.27 micron gold) 00 Standard model ABOUT THIS SERIES On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart. Mounting accessories : Standard hardware supplied with all models : 2 hex nuts 7 mm (.275) across flats P/N U5731, 1 locking ring P/N U5821 (with keyway) or U5831 (with flat) and 1 lockwasher P/N U5841. 3 PANEL SWITCHES ZL series Subminiature toggle switches * metal bushing III O2.40 (.094 DIA) ZL31S0 ON - OFF ZL36S0 ON - ON ZL39S0 ON OFF ON ZL37S0 MOM OFF MOM ZL38S0 MOM OFF ON ZL32S0 MOM - ON O6.00 (.236 DIA) 0.50 (.019) I 4.00 8.60 (.157) (.338) II EPOXY 3 1.50 (.059) 2.54 (.100) 2 1 0.50 (.019) 8.10 (.318) 5.00 (.196) III I 2.80 (.110) O4.83-48UNS-2A (10-48UNS-2A) II 24 5.60 5.50 (.220) (.216) FLAT SOLDER LUG TERMINALS 4.39 (.172) III O2.40 (.094 DIA) II I ZL31P0 ON - OFF ZL36P0 ON - ON ZL39P0 ON OFF ON ZL37P0 MOM OFF MOM ZL38P0 MOM OFF ON ZL32P0 MOM - ON O6.00 (.236 DIA) EPOXY 3 2 1 2.54 (.100) 0.50 (.019) 8.10 (.318) O1.10 (.043 DIA) 5.00 (.196) III 0.50 (.019) (10-48UNS-2A) I 3.30 (.129) O4.83-48UNS-2A II 24 8.60 5.60 5.50 (.338) (.220) (.216) FLAT STRAIGHT PC TERMINALS 2.54 (.100) PANEL SWITCHES ZL series 4.39 (.172) Shown with threaded bushing code 01 CONTACT & TERMINAL MATERIALS BASIC P/N 0 1 3 00 Brass, gold plated (standard) Brass, silver plated Brass, gold plated (1.27 micron gold) BUSHINGS BASIC P/N 01 02 4 Threaded, with flat Threaded, with keyway 00