• Strength of terminals : pull-out force 10 N max.
• Torque : 1 Nm max. applied between the 2 nuts
• Max. panel thickness : 1.5 mm (.059) with 2 nuts
GENERAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
- gold plated contacts : 0.4 VA 20 V max. AC or DC
- silver plated contacts : 0.5 A 48 V max. AC or DC
• Minimum load : 10 mA 50 mV - 10 µA 5 VDC
• Contact resistance : 20 mΩ max.
• Insulation resistance : 1,000 MΩ min. at 500 VDC
• Dielectric strength: 1,000 Vrms 50 Hz min. between terminals and
frame, 500 Vrms 50 Hz min. between terminals
• Electrical life at full load :
ELECTRICAL SPECIFICATIONS
Contacts Number of cycles
2 positions 3 positions
Gold plated 60,000 30,000
Silver plated 20,000 10,000
• Operating temperature : -30 °C to +85 °C (-22 °F to +185 °F)
• Moisture : 21 days 95 % (NFC 20-603 - IEC 8-2-3)
ENVIRONMENTAL SPECIFICATIONS
Ø 4.83 mm threaded bushing
Solder lug and straight PC terminals
DISTINCTIVE FEATURES
ZL series
Subminiature toggle switches • metal bushing
The company reserves the right to change specifications without notice.
PANEL SWITCHES
1
SW-ZL-1711
Subminiature toggle switches • metal bushing
ZL series
• Hand soldering : 280 °C (536 °F) max. for 5 seconds max.
• Wave soldering : 260 °C (500 °F) max. for 5 seconds max.
SOLDERING
• Case : thermoplastic UL94-V0
• Actuator : brass, nickel plated
• Bushing : zamac, tin plated
• Contacts and terminals :
0 : brass, gold plated (standard)
1 : brass, silver plated
3 : brass, gold plated (1.27 micron gold)
• Terminal seal : epoxy
MATERIALS
(.172)
4.39 4.50
(.177)
Ø4.90
(.193 DIA)(.193 DIA)
Ø4.90
Ø2.40
(.094 DIA)
6.10
(.240)
4.39
(.172) (.240)
6.10
(.094 DIA)
Ø
4.90
(.193 DIA)Ø2.40
4.50
(.177)
0.60
Ø
4.90
(.193 DIA)
0.76
(.030)
(.024)
PANEL CUT-OUT
WITH FLAT
WITH KEYWAY
ELECTRICAL FUNCTIONS
1 3
1 23
Function 1Other function
TERMINALS
(.027)
(.129)
3.30
0.70
Straight P0
(.029)
0.75
(.059)
1.50
(.059)
1.50
Solder lug S0
PANEL SWITCHES
2
BASIC PART NUMBER
SERIES
ZL
3Single pole
NUMBER OF POLES
S0 Solder lug
P0 Straight PC
TERMINALS
OPTIONS
0Brass, gold plated
1Brass, silver plated
3Brass, gold plated
(1.27 micron gold)
CONTACT AND TERMINAL MATERIALS
01 Threaded, with flat
02 Threaded, with keyway
BUSHINGS
00 Standard model
MODELS
BUILD YOUR PART NUMBER
ELECTRICAL FUNCTIONS
1ON - OFF
6ON - ON
9ON OFF ON
7MOM OFF MOM
8ON OFF MOM
2ON - MOM
Subminiature toggle switches • metal bushing
ZL series
ABOUT THIS SERIES
Mounting accessories : Standard hardware supplied with all models : 2 hex nuts 7 mm (.275) across flats P/N U5731, 1 locking ring
P/N U5821 (with keyway) or U5831 (with flat) and 1 lockwasher P/N U5841.
On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart.
PANEL SWITCHES
3
SOLDER LUG TERMINALS (.094 DIA)
(.059)
1.50
Ø6.00
(.236 DIA)
Ø2.40
(.172)
(.100)
2.54
4.00
(.157)
5.00
(.196)
(10-48UNS-2A)
Ø4.83-48UNS-2A
8.60
(.338)
5.505.60
(.220) (.216)
(.110)
2.80
(.019)
0.50
(.318)
4.39
8.10
2
1
3
0.50
(.019)
24
IIII II
EPOXY
FLAT
III II I
ZL31S0 ON -OFF
ZL36S0 ON -ON
ZL39S0 ON OFF ON
ZL37S0 MOM OFF MOM
ZL38S0 MOM OFF ON
ZL32S0 MOM -ON
Shown with threaded bushing code 01
Subminiature toggle switches • metal bushing
ZL series
STRAIGHT PC TERMINALS FLAT
III II I
ZL31P0 ON -OFF
ZL36P0 ON -ON
ZL39P0 ON OFF ON
ZL37P0 MOM OFF MOM
ZL38P0 MOM OFF ON
ZL32P0 MOM -ON
Ø1.10
(.043 DIA)
13 2
(.094 DIA)
Ø6.00
(.236 DIA)
Ø2.40
Ø4.83-48UNS-2A
(10-48UNS-2A)
EPOXY
8.10
(.318)
(.196)
5.00
(.019)
0.50
2.54
(.100)
(.216)
8.60
(.338)
5.60 5.50
(.220)
(.129)
3.30
0.50
(.019)
II IIII
(.100)
2.54
24
(.172)
4.39
0 Brass, gold plated (standard)
1 Brass, silver plated
3 Brass, gold plated (1.27 micron gold)
CONTACT & TERMINAL
MATERIALS
BASIC P/N
BUSHINGS
BASIC P/N
01 Threaded, with flat
02 Threaded, with keyway
00
00
PANEL SWITCHES
4
