SRM-Series ALUMINUM ELECTROLYTIC CAPACITORS MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 85C SMQ @Downsized from current standard SMG series @Endurance : 85C 2000 hours @Non Solvent-proof type downsized SMG ?SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tane) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -40 to +85C(6.3 to 400Vdc) -25 to +85C(450Vdc) 6.3 to 450Vdc P20% (M) 6.3 to 100Vdc [F18 I=0.03CV or 4MA, whichever is greater. (at 20C, 120Hz) 160 to 450Vdc Time After 1minute CV CV[1000 I=0.1CV+40 max. CV>1000 I=0.04CV+100 max. (at 20C) (at 20C after 1 minute) (at 20C after 3 minutes) ]F20 I=0.03CV Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 315 to 400V 450V tanE (Max.) 0.28 0.24 0.20 0.16 0.14 0.12 0.09 0.08 0.20 0.24 0.24 (at 20C, 120Hz) When nominal capacitance exceeds 1000MF, add 0.02 to the value above for each 1000MF increase. Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 200V 250V 350V 400V 450V Z(-25C)/Z(+20C) [F8 6 2 2 2 2 2 4 3 3 4 3 5 4 ]F10 6 2 2 2 2 2 4 3 3 4 3 5 4 Z(-40C)/Z(+20C) [F8 3 3 3 4 5 8 8 10 10 8 12 8 ]F10 12 3 3 3 4 5 6 8 4 10 4 6 - (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C. Capacitance change [P20% of the initial value D.F. (tanE) [200% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 85C without voltage applied. Rated voltage 6.3 to 100Vdc 160 to 450Vdc Capacitance change [P15% of the initial value [P20% of the initial value D.F. (tanE) [200% of the initial specified value [200% of the initial specified value Leakage current [The initial specified value [500% of the initial specified value FP0.5 Fd Sleeve FD' f5 to f18 FP0.5 ?DIMENSIONS (Radial Lead Type=VB) [mm] L' Vent (except F5) 4min. (F5 to F10) (F12.5 to F18) Fd Sleeve FP0.5 Gas escape end seal fD fd F fD' L' FD' ]f20 15min. L' Vent 15min. 4min. 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 FD+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 22 20 1.0 1.0 10.0 10.0 FD+0.5max. L+2.0max. ?PART NUMBERING SYSTEM SMQ 6.3 VB 1000 M Cap tolerance (P20%) Nominal cap code Radial lead type Rated voltage in volts Series name Capacitance 0.1MF 0.47MF 1.0MF 4.7MF 10MF 100MF (1/2) Code R1 R47 1 4R7 10 100 CAT. No. E1001D SRM-Series ALUMINUM ELECTROLYTIC CAPACITORS MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 85C ?STANDARD RATINGS mF Vdc 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 68 100 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 15,000 22,000 33,000 47,000 mF Vdc 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 68 100 220 330 470 1,000 2,200 6.3 8B11.5 10B16 10B20 12.5B20 12.5B25 16B25 16B31.5 18B35.5 20B40 22B50 10 540 890 1,190 1,550 1,920 2,350 2,550 3,200 3,500 3,900 100 2.1 5B11 4.7 5B11 7.0 5B11 10 5B11 21 5B11 30 5B11 40 5B11 45 5B11 70 5B11 130 6.3B11 180 8B11.5 200 8B11.5 270 10B12.5 340 10B16 550 12.5B20 760 12.5B25 1,000 16B25 18B35.5 1,350 2,400 22B50 5B11 6.3B11 6.3B11 10B12.5 10B16 12.5B20 12.5B25 16B25 16B31.5 16B35.5 18B40 22B50 16 240 290 350 650 990 1,450 1,800 2,250 2,550 2,880 3,400 4,500 6.3B11 6.3B11 8B11.5 10B12.5 10B20 12.5B25 16B25 16B25 16B35.5 18B40 22B40 260 320 440 700 1,000 1,700 2,100 2,250 2,710 3,100 3,800 5B11 6.3B11 8B11.5 10B12.5 10B16 12.5B25 16B25 16B25 16B35.5 18B40 22B50 180 280 440 550 860 1,550 1,980 2,200 2,600 2,800 3,800 5B11 6.3B11 6.3B11 8B11.5 10B12.5 10B16 12.5B20 16B25 16B31.5 16B35.5 18B40 22B50 130 160 210 385 490 650 1,150 1,800 2,100 2,500 2,800 3,700 50 5B11 5B11 5B11 5B11 5B11 5B11 5B11 5B11 5B11 5B11 5B11 6.3B11 6.3B11 8B11.5 10B12.5 10B16 10B20 12.5B25 16B31.5 18B35.5 20B40 22B50 63 1.3 2.9 4.3 6.2 17 28 35 41 60 95 125 155 210 260 430 590 760 1,350 1,980 2,500 2,900 3,500 5B11 6.3B11 6.3B11 8B11.5 8B11.5 10B16 10B20 12.5B20 16B25 18B35.5 20B40 22B50 100 140 170 220 280 490 710 900 1,300 2,300 2,700 3,400 Rated ripple current (mArms) at 85C, 120Hz 200 80 130 180 210 350 430 760 995 1,200 35 Case size FDBL (mm) 160 8B11.5 10B12.5 10B16 10B20 12.5B20 12.5B25 16B31.5 18B35.5 18B40 25 6.3B11 6.3B11 6.3B11 6.3B11 8B11.5 10B16 10B20 12.5B20 12.5B25 16B25 16B35.5 18B40 250 22 33 40 50 80 150 205 270 350 475 700 950 6.3B11 6.3B11 10B12.5 10B20 10B20 12.5B20 16B25 16B25 18B35.5 40 50 100 170 200 270 380 440 680 350 400 6.3B11 8B11.5 8B11.5 10B12.5 12.5B20 12.5B25 16B25 16B25 18B31.5 6.3B11 6.3B11 8B11.5 8B11.5 10B12.5 10B16 12.5B25 16B25 16B25 16B31.5 18B35.5 30 46 55 90 185 240 325 400 530 450 12 22 38 48 60 90 205 275 280 340 440 8B11.5 10B12.5 10B12.5 10B20 12.5B25 16B25 16B31.5 18B35.5 18B40 28 40 46 80 140 180 220 260 280 Rated ripple current (mArms) at 85C, 120Hz Case size FDBL (mm) ?RATED RIPPLE CURRENT MULTIPLIERS @Frequency Multipliers (F5 to F18) Capacitance (mF) Frequency (Hz) 0.1 to 4.7 10 to 68 100 to 1,000 2,200 to (F20 to F22) 50 0.65 0.75 0.80 0.85 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 Frequency (Hz) Rated Voltage (Vde) 100k 2.50 1.80 1.50 1.08 6.3 to 50 63 to 100 (2/2) 50 0.95 0.92 120 1.00 1.00 300 1.03 1.07 1k 1.05 1.13 10k 1.08 1.19 100k 1.08 1.20 CAT. No. E1001D