CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead PSC Low profile Lower ESR Super low ESR, high temperature resistance and high ripple current capability Rated voltage range : 2.5 to 16Vdc Endurance : 2,000 hours at 105 Suitable for DC-DC converters, voltage regulators and decoupling applications for computer motherboards RoHS Compliant PSA Lower ESR PS SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105 Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current *Note 2.5 to 16Vdc 20% (M) Rated voltagex1.15 I=0.2CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (Vdc) Dissipation Factor (tan) 0.08 max. (FA5 size : 0.12max.) Low Temperature Characteristics (Max. Impedance Ratio) Z(-25)/Z(+20)1.15 Z(-55)/Z(+20)1.25 Endurance Bias Humidity Test Surge Voltage Test Failure Rate (at 20, 120Hz) (at 105) (at 20 after 2 minutes) (at 20, 120Hz) (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours at 105. Appearance No significant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specified value 150% of the initial specified value ESR The initial specified value Leakage current The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to DC voltage at 60, 90 to 95% RH for 1,000 hours. Appearance No significant damage 20% of the initial value Capacitance change 150% of the initial specified value D.F. (tan) ESR 150% of the initial specified value The initial specified value Leakage current The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resistor (R=1k) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change 20% of the initial value 150% of the initial specified value D.F. (tan) ESR 150% of the initial specified value The initial specified value Leakage current 0.5% per 1,000 hours maximum (Confidence level 60% at 105) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS [mm] MARKING Code : E EX) 4V560F A 292 560 4V D' d F 0.5 Coated Case F 0.5 Terminal (FA5) L' 15min. 4min. Size code D d F D' L' (HB5, JB5) FA5 6.3 0.5 2.5 HB5 8.0 JB5 10.0 0.8 3.5 5.0 D+0.5max L+0.3max L+1.5max Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (1/2) CAT. No. E1001L CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PSA AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 270F:271, 1 000F:102) Lead forming*Taping code Terminal code Voltage code (ex. 4V:4R0, 6.3V:6R3, 10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" STANDARD RATINGS WV(Vdc) 2.5 4 6.3 10 16 Cap(F) Case size DxL(mm) ESR (m max/20, 100k to 300kHz) 390 680 820 1,000 1,500 270 390 560 820 220 330 390 470 680 47 68 100 150 270 470 100 6.3x10.5 8x11.5 8x11.5 10x11.5 10x11.5 6.3x10.5 6.3x10.5 8x11.5 10x11.5 6.3x10.5 6.3x10.5 8x11.5 8x11.5 10x11.5 6.3x10.5 6.3x10.5 6.3x10.5 6.3x10.5 8x11.5 10x11.5 6.3x10.5 20 7 7 6 7 20 24 7 6 20 28 8 7 7 25 25 25 25 9 8 25 Rated ripple current (mArms/105, 100kHz) 3,160 5,580 5,580 5,860 5,860 3,160 3,300 5,580 5,860 3,160 3,190 5,080 5,700 5,860 2,820 2,820 2,820 2,820 4,710 5,650 2,820 Part No. APSA2R5E391MFA5S APSA2R5E681MHB5S APSA2R5E821MHB5S APSA2R5E102MJB5S APSA2R5E152MJB5S APSA4R0E271MFA5S APSA4R0E391MFA5S APSA4R0E561MHB5S APSA4R0E821MJB5S APSA6R3E221MFA5S APSA6R3E331MFA5S APSA6R3E391MHB5S APSA6R3E471MHB5S APSA6R3E681MJB5S APSA100E470MFA5S APSA100E680MFA5S APSA100E101MFA5S APSA100E151MFA5S APSA100E271MHB5S APSA100E471MJB5S APSA160E101MFA5S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (2/2) CAT. No. E1001L