MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C - FEBRUARY 1979 - REVISED FEBRUARY 2002 D D D D D D D MC3303 . . . D, N, OR PW PACKAGE MC3403 . . . D, DB, N, NS, OR PW PACKAGE (TOP VIEW) Wide Range of Supply Voltages, Single Supply . . . 3 V to 36 V or Dual Supplies Class AB Output Stage True Differential Input Stage Low Input Bias Current Internal Frequency Compensation Short-Circuit Protection Designed to Be Interchangeable With Motorola MC3303, MC3403 1OUT 1IN- 1IN+ VCC+ 2IN+ 2IN- 2OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN- 4IN+ VCC- 3IN+ 3IN- 3OUT description The MC3303 and the MC3403 are quadruple operational amplifiers similar in performance to the A741, but with several distinct advantages. They are designed to operate from a single supply over a range of voltages from 3 V to 36 V. Operation from split supplies also is possible, provided the difference between the two supplies is 3 V to 36 V. The common-mode input range includes the negative supply. Output range is from the negative supply to VCC - 1.5 V. Quiescent supply currents are less than one-half those of the A741. The MC3303 is characterized for operation from -40C to 85C, and the MC3403 is characterized for operation from 0C to 70C. AVAILABLE OPTIONS PACKAGE TA VIOMAX AT 25C PLASTIC SMALL OUTLINE (D, NS) 0C to 70C 10 mV MC3403D MC3403NS -40C to 85C 8 mV MC3303D PLASTIC SHRINK SMALL OUTLINE (DB) PLASTIC DIP (N) PLASTIC THIN SHRINK SMALL OUTLINE (PW) MC3403DB MC3403N MC3403PW -- MC3303N MC3303PW The D package is available taped and reeled. Add R suffix to the device type (e.g., MC3403DR). The DB, NS, and PW packages are only available taped and reeled. logic diagram (each amplifier) IN+ + IN- - OUT Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2002, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C - FEBRUARY 1979 - REVISED FEBRUARY 2002 schematic (each amplifier) Common Bias Circuitry VCC+ 5 pF IN+ To Three Other Amplifiers Output IN- 2.4 k VCC- Component values shown are nominal. absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage (see Note 1): VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V VCC- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -18 V Supply voltage, VCC+ with respect to VCC- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Differential input voltage (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Input voltage (see Notes 1 and 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V Package thermal impedance, JA (see Note 4): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86C/W DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113C/W Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. These voltage values are with respect to the midpoint between VCC+ and VCC-. 2. Differential voltages are at IN+ with respect to IN-. 3. Neither input must ever be more positive than VCC+ or more negative than VCC-. 4. The package thermal impedance is calculated in accordance with JESD 51-7. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C - FEBRUARY 1979 - REVISED FEBRUARY 2002 recommended operating conditions VCC Supply voltage Dual supply voltage Dual-supply TA Operating free-air free air temperature MIN MAX 5 30 UNIT V VCC+ VCC- 2.5 15 V -2.5 -15 V MC3303 -40 85 MC3403 0 70 C electrical characteristics at specified free-air temperature, VCC+ = 14 V, VCC- = 0 V for MC3303, VCC = 15 V for MC3403 (unless otherwise noted) PARAMETER VIO Input offset voltage See Note 5 aV Temperature coefficient of input offset voltage See Note 5 IIO Input offset current See Note 5 aI Temperature coefficient of input offset current See Note 5 IIB Input bias current See Note 5 VICR Common-mode input voltage range VOM Peak P k output t t voltage swing IO IO MC3303 TEST CONDITIONS MIN MC3403 TYP MAX 2 8 25C Full range MIN TYP MAX 2 10 10 Full range 10 25C 30 Full range 12 75 30 Full range 25C -0.2 Full range 50 -0.5 -0.2 -1 VCC- to 12 VCC- to 12.5 VCC- to 13 VCC- to 13.5 25C 12 12.5 12 13.5 RL = 2 k 25C 10 12 10 13 RL = 2 k Full range 10 25C 20 Full range 15 AVD Large-signal differential g g voltage amplification V RL = 2 k VO = 10 V, BOM Maximum-output-swing bandwidth VOPP = 20 V, AVD = 1, THD 5%, RL = 2 k B1 m Unity-gain bandwidth ri nA pA/C -0.5 -0.8 25C RL = 10 k 50 200 50 mV V/C 10 250 UNIT A V V 10 200 20 200 V/mV 15 25C 9 9 kHz 25C 1 1 MHz Phase margin VO = 50 mV, RL = 10 k CL = 200 pF, RL = 2 k Input resistance f = 20 Hz 25C ro Output resistance f = 20 Hz 25C CMRR Common-mode rejection ratio VIC = VICRmin 25C kSVS Supply voltage sensitivity (VIO/VCC) VCC = 2.5 to 15 V 25C IOS Short-circuit output current 25C 25C 60 0.3 60 1 0.3 75 70 10 90 70 30 150 30 45 10 1 M 75 90 dB 30 150 V/V 30 45 mA ICC Total supply current No load, See Note 5 25C 2.8 7 2.8 7 mA All characteristics are measured under open-loop conditions with zero common-mode voltage unless otherwise specified. Full range for TA is -40C to 85C for MC3303, and 0C to 70C for MC3403. The VICR limits are linked directly, volt-for-volt, to supply voltage; the positive limit is 2 V less than VCC+. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. NOTE 5: VIO, IIO, IIB, and ICC are defined at VO = 0 for MC3403 and VO = 7 V for MC3303. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C - FEBRUARY 1979 - REVISED FEBRUARY 2002 electrical characteristics, VCC+ = 5 V, VCC- = 0 V, TA = 25C (unless otherwise noted) TEST CONDITIONS PARAMETER VIO IIO Input offset voltage IIB MC3303 MIN TYP MC3403 MAX MIN TYP MAX UNIT VO = 2.5 V VO = 2.5 V 10 2 10 75 30 50 nA Input bias current VO = 2.5 V RL = 10 k -0.5 -0.2 -0.5 A VOM Peak output voltage swing RL = 10 k, VCC+ = 5 V to 30 V AVD Large-signal g g differential voltage amplification VO = 1 1.7 7 V to 3 3.3 3V V, RL = 2 k kSVS Supply-voltage y g sensitivity y (VIO/VCC) 5 V to 15 V VCC = 2 2.5 Supply current VO = 2.5 V, No load f = 1 kHZ to 20 kHZ Input offset current ICC VO1/VO2 Crosstalk attenuation 3.3 3.5 3.3 VCC+ - 1.7 3.5 V VCC+ - 1.7 20 200 20 200 150 2.5 7 120 mV V/mV 150 2.5 7 120 V/V mA dB All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. Output will swing essentially to ground. operating characteristics, VCC+ = 14 V, VCC- = 0 V for MC3303, VCC = 15 V for MC3403, TA = 25C, AVD = 1 (unless otherwise noted) PARAMETER TYP UNIT VI = 10 V, VO = 50 mV, CL = 100 pF, RL = 2 k, See Figure 1 0.6 V/s CL = 100 pF, RL = 10 k, See Figure 1 0.35 s CL = 100 pF, RL = 10 k, See Figure 1 0.35 s Overshoot factor VO = 50 mV, VO = 50 mV, CL = 100 pF, RL = 10 k, See Figure 1 20 % Crossover distortion VI(PP) = 30 mV, VOPP = 2 V, f = 10 kHZ 1 % SR Slew rate at unity gain tr tf Rise time Fall time TEST CONDITIONS PARAMETER MEASUREMENT INFORMATION - OUT + VI CL = 100 pF RL Figure 1. Unity-Gain Amplifier 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C - FEBRUARY 1979 - REVISED FEBRUARY 2002 TYPICAL CHARACTERISTICS 30 IIII IIII IIII RL = 10 k TA = 25C 25 20 15 10 5 0 0 2 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY VOPP - Maximum Peak-to-Peak Output Voltage - V VOPP - Maximum Peak-to-Peak Output Voltage - V MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs SUPPLY VOLTAGE 4 6 8 10 12 14 16 30 25 20 15 IIIII IIIII IIIII IIIII 10 5 VCC = 15 V CL = 0 RL = 10 k TA = 25C See Figure 1 0 1k 10 k 100 k f - Frequency - Hz |VCC| - Supply Voltage - V Figure 3 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREQUENCY VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE IIIII IIIII IIIII IIIII VCC = 15 V RL = 2 k TA = 25C See Figure 1 10 105 Output Input Output Voltages - V A VD - Large-Signal Differential Voltage Amplification - dB Figure 2 106 104 103 102 IIIII IIIII VCC = 15 V RL = 2 k TA = 25C 10 1 1 10 100 1M 5 0 -5 Input -10 1k 10 k 100 k 1M 0 f - Frequency - Hz 10 20 30 40 50 60 70 80 90 t - Time -s Figure 4 Figure 5 Operation of the device at these or any other conditions beyond those indicated under ``recommended operating conditions" is not implied. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C - FEBRUARY 1979 - REVISED FEBRUARY 2002 TYPICAL CHARACTERISTICS INPUT BIAS CURRENT vs SUPPLY VOLTAGE INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE IIIII IIIII 250 VCC = 15 V 200 150 100 200 150 100 50 50 0 -75 IIII IIII TA = 25C I IB - Input Bias Current - mA I IB - Input Bias Current - mA 250 0 -50 -25 0 25 50 75 100 125 0 2 TA - Free-Air Temperature - C 4 6 8 10 12 14 16 |VCC| - Supply Voltage - V Figure 6 Figure 7 Operation of the device at these or any other conditions beyond those indicated under ``recommended operating conditions" is not implied. 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 24-Aug-2018 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) MC3303D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MC3303 MC3303DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MC3303 MC3303DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MC3303 MC3303N ACTIVE PDIP N 14 25 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type -40 to 85 MC3303N MC3303PW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 M3303 MC3303PWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 M3303 MC3403D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 MC3403 MC3403DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 MC3403 MC3403N ACTIVE PDIP N 14 25 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type 0 to 70 MC3403N MC3403NE4 ACTIVE PDIP N 14 25 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type 0 to 70 MC3403N MC3403NSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 MC3403 MC3403PWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 M3403 MC3403PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 M3403 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 24-Aug-2018 (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 12-Mar-2016 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant MC3303DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 MC3303PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 MC3403DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 MC3403DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 MC3403NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 MC3403PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 12-Mar-2016 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) MC3303DR SOIC D 14 2500 367.0 367.0 38.0 MC3303PWR TSSOP PW 14 2000 367.0 367.0 35.0 MC3403DR SOIC D 14 2500 367.0 367.0 38.0 MC3403DR SOIC D 14 2500 333.2 345.9 28.6 MC3403NSR SO NS 14 2000 367.0 367.0 38.0 MC3403PWR TSSOP PW 14 2000 367.0 367.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. TI's published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and services. Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyers and others who are developing systems that incorporate TI products (collectively, "Designers") understand and agree that Designers remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products used in or for Designers' applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will thoroughly test such applications and the functionality of such TI products as used in such applications. TI's provision of technical, application or other design advice, quality characterization, reliability data or other services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, "TI Resources") are intended to assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any way, Designer (individually or, if Designer is acting on behalf of a company, Designer's company) agrees to use any particular TI Resource solely for this purpose and subject to the terms of this Notice. TI's provision of TI Resources does not expand or otherwise alter TI's applicable published warranties or warranty disclaimers for TI products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections, enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically described in the published documentation for a particular TI Resource. Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. TI RESOURCES ARE PROVIDED "AS IS" AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM, INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949 and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements. Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use. Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S. TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product). Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications and that proper product selection is at Designers' own risk. Designers are solely responsible for compliance with all legal and regulatory requirements in connection with such selection. Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer's noncompliance with the terms and provisions of this Notice. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2018, Texas Instruments Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: MC3303N MC3303D MC3303PWR MC3303DR MC3303NE4 MC3303PW MC3303PWRE4 MC3303DG4