Model B100NA30X4 Chip Attenuator 100 Watts, 30 dB Description The B100NA30X4 is high performance Aluminum Nitride (AlN) chip attenuator intended as a cost competitive alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators, and for use in power monitoring. The termination is also RoHS compliant! General Specifications Features: * RoHS Compliant * 100 Watts * DC - 2.7 GHz * AlN Ceramic * Non-Nichrome Resistive Element * Low VSWR * 100% Tested * Small Size Resistive Element Substrate Terminal Finish Operating Temperature Thick film AlN Ceramic Matte Tin over Nickel Barrier -55 to +150C (see de rating chart) Tolerance is 0.010", unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications 30 dB 2.0 dB, DC - 1.5 GHz 30 dB 2.5 dB, 1.5GHz - 2.5GHz 100 Watts Power: DC - 2.7 GHz Frequency Range: >24 dB to 2.2 GHz Return Loss: >20 dB to 2.7GHz Value (A-B) Value (A-C) Value (B-C) Tolerance 93.5 49.9 49.9 4% Attenuation Value: Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing B100NA30X4 (097) Rev. D pg.1 of 2 Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model B100NA30X4 ROHS Compliant Typical Performance: Return Loss: Attenuation: Power De-rating: Tape & Reel: Mounting Footprint and Procedure: Correct lead orientation ( Alternate lead orientation. (May require external matching) B100NA30X4 (097) Rev. D pg.2 of 2 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.