Surface Mount Multilayer Ceramic Chip Capacitors
DSCC Qualified Type 03028
Document Number 45043 For technical questions, contact: mlcc.specials@vishay.com www.vishay.com
Revision: 09-Aug-07 57
DSCC 03028
Vishay Vitramon
FEATURES
•US defense supply center approved
•Federal stock control number, CAGE CODE 95275
•Small case size (0603)
•Stable BP, BR and BX dielectrics
•Excellent aging characteristics
•Lead (Pb)-free applied for “M” termination code
•Tin/Lead “Z” termination code is available
•Surface-mount, precious metal technology, wet build
process
•Made with a combination of design, materials and tight
process control to achieve very high field reliability
ELECTRICAL SPECIFICATIONS
Note: Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: BP, BR, BX: - 55 °C to + 125 °C
Capacitance Range:
BP = 0.5 pF to 1000 pF
BR = 100 pF to 0.1 µF
BX = 100 pF to 0.1 µF
Voltage Rating: 10 Vdc to 100 Vdc
Temperature Coefficient of Capacitance (TCC):
BP = 0 ± 30 ppm/°C from - 55 °C to + 125 °C with zero (0) V(DC)
applied
BP = 0 ± 30 ppm/°C from - 55 °C to + 125 °C with
100 % rated Vdc applied
BR =
±
15 % from - 55 °C to + 125 °C with zero (0)
V(DC)
applied
BR = + 15 %, - 40 % from - 55 °C to + 125 °C with
100 % rated Vdc applied
BX =
±
15 % from - 55 °C to + 125 °C with zero (0)
V(DC)
applied
BX = + 15 %, - 25 % from - 55 °C to + 125 °C with
100 % rated Vdc applied
Dissipation Factor (DF):
BP: 0.15 % max. at 1.0 Vrms and 1 MHz for values ≤ 1000 pF
0.15 % max. at 1.0 Vrms and 1 kHz for values > 1000 pFBR
and BX: ≤ 25 V ± 3.5 % max. at 1.0 Vrms and 1 kHz
≥ 50 V ± 2.5 % max. at 1.0 Vrms and 1 kHz
Aging Rate:
BP = 0 % maximum per decade
BR, BX = 1 % maximum per decade
Insulation Resistance (IR):
At + 25 °C and rated voltage 100 000 MΩ minimum or
1000 ΩF, whichever is less
At + 125 °C and rated voltage 10 000 MΩ minimum or
100 ΩF, whichever is less
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for a
1 to 5 second period and the charge/discharge current does
not exceed 50 mA
≤ 200 Vdc: DWV at 250 % of rated voltage
Note:
1. DC voltage rating should not be exceeded in application
* Pb containing terminations are not RoHS compliant, exemptions may apply
DIMENSIONS
PART ORDERING
NUMBER LENGTH WIDTH MAXIMUM
THICKNESS (T)
TERMINATION PAD
MINIMUM MAXIMUM
VJ03028- 0.063 ± 0.005
[1.60 ± 0.12]
0.031 ± 0.005
[0.80 ± 0.12]
0.035
[0.89]
0.012
[0.30]
0.018
[0.46]
ORDERING INFORMATION
VJ03028- BX 102 B J Z - T
DSCC
NUMBER
DIELECTRIC CAPACITANCE
NOMINAL CODE
DC VOLTAGE
RATING 1) CAPACITANCE
TOLERANCE
TERMINATION GROUP C TESTING
OPTION
PA CK A GI N G
CASE
SIZE
0603
BP
BR
BX
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An “R”
indicates a
decimal point.
Examples:
101 = 100 pF
1R8 = 1.8 pF
Y = 16 V
Z = 25 V
A = 50 V
B = 100 V
C = ± 0.25 pF
D = ± 0.5 pF
F = ± 1 %
G = ± 2 %
H = ± 3 %
J = ± 5 %
K = ± 10 %
NOTE:
C, D < 10 pF (BP)
F, G , H
≥
10 pF (BP)
J, K
≥
10 pF
(BP, BR, BX)
M = Palladium
silver
Z = Ni barrier
with tin/lead
plate min. 4 %
lead
C = Full Group C
L = 2000 hours life test
only
M = 1000 hours life test
only
H = Low voltage humidity
T = 7" Reel Plastic tape
C = 7" Reel Paper tape
J = 7" Reel (low quantity)
R = 11 1/4" Reel Plastic tape
P = 11 1/4" Reel Paper tape
B = Bulk
RoHS
COMPLIANT
Available