Description
The 1.6/5.6 series is a European design with
two coupling versions: Threaded provides
positive mating, Push-pull allows quick
installation. Amphenol 1.6/5.6 coaxial
connectors are miniatur e 75 ohm units operating
from 0-1GHz.
The compact design of the 1.6/5.6 permits
dense connector packing making these
connectors ideally suited to applications where
space limitation is a factor.
This series complies with DIN 47295, DIN
41626, DIN 47297, NFC 93-569, NFC 93-570,
IEC 169-13, and the CECC 22230 standards.
Features/Benefits
• Meets IEC 169-13, DIN 47295 and
NFC 93-570 international specifications designed
for SMT.
• Plugs and bulkhead jacks are available in crimp-
crimp termination versions to ensure high
reliability in connector assembly and a lower
cost installation method.
• Threaded coupling designed for quick
connect/disconnect allows safe coupling.
Application
• Base Stations
• Cable Assemblies
• Computer / LAN
• Routers
• Switching Equipment
• Telecom
• Wireless
1.6/5.6 Amphenol®
1.6/5.6
Specifications 102
Plugs & Receptacles 103
101
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
1.6/5.6
1.6/5.6 Amphenol®
Specifications
102
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
ELECTRICAL
Impedance 75 ohms
Frequency range 0-1GHz
Voltage rating 330 volts peak
Other Contact resistance:
Center contact
4 milliohm
Outer contact
2 milliohm
Insulation resistance:
10000 megohms
MECHANICAL
Mating M9 x 0.5 threaded
coupling
Cable affixment Hex crimp
(braid or jacket)
Cable affixment Crimp or solder
(center conductor)
Captivated contacts All crimps
MATERIAL
Contacts Male: Brass
Female: (center and
outer) Beryllium copper.
Gold plated
Other metal parts Brass, nickel plated
Insulators Teflon
Crimp ferrule Copper
ENVIRONMENTAL
Temperature range - 40°C to +155°C
Connector Durability 500 matings
NOTE: These characteristics are typical and may
not apply to all connectors.
PLUG JACK
1.6/5.6 1.6/5.6
Fig. 3 Fig. 4
Fig. 1 Fig. 2
Straight Plugs
156-929-02, 156-929-34, 156-112-RG59
Receptacle
156-343-03 Printed Circuit Receptacle
156-335-01
c•
b
bb
1.6/5.6 Amphenol®
103
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
Connector. Cable
Cable Attachment
Dimensions, inches (millimeters) Amphenol Fig.
Description Outer Inner a b c ●de Number
L910/34 Crimp Crimp 1.18■.425 .161 —— 156-929-34 1
Plug BT3002 (30.0) (10.8) (4.1)
L910/16 Crimp Crimp 1.18■.425 .205 —— 156-929-02 1
(30.0) (10.8) (5.2)
.984 .433 .220
RG59 Crimp Crimp (25.0) (11.0) (5.6) — — 156-112-RG59 1
L910/34 Crimp Crimp 1.26■.425 .161 .543 .047 156-931-34 2
Bulkhead Jack BT3002 (32.0) (10.8) (4.1) (13.8) (1.2)
L910/16 Crimp Crimp 1.26■.425 .205 .543 .047 156-931-02 2
(32.0) (10.8) (5.2) (13.8) (1.2)
1.00 .425 .220
RG59 Crimp Crimp (25.5) (10.8) (5.6) —— 156-642-RG59 2
Receptacle Front Mount or Solder Cup .906 .425 —.630 .138 156-343-03 3
Rear Mount (23.0) (10.8) (16.0) (3.5)
Printed Circuit Receptacle .827 .433 .433
4 legs & terminal Blunt Post (21.0) (11.0) —(11.0) —156-335-01 4
.118 (3.0) long x .039 (1.0) diameter /
.039 (1.0) stand off pads
1.6/5.6 PLUGS, BULKHEAD JACKS, RECEPTACLES
• accommodates cable diameter ■includes outer ferrule
c•
e
d
e
a
b
a
a
a
Bulkhead Jacks
156-931-02, 156-931-34, 156-642-RG59
