LED Driver BCR402U Datasheet Revision 2.0, 2012-04-13 Power Management & Multimarket Edition 2012-04-13 Published by Infineon Technologies AG 81726 Munich, Germany (c) 2012 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. BCR402U Revision History Page or Item Subjects (major changes since previous revision) Revision 2.0, 2012-04-13 All Datasheet layout updated Table 2-1 Vout limit increased Table 2-3 Rint limits tightened Figure 3-7 Temperature labels updated Figure 3-8 Temperature labels updated Trademarks of Infineon Technologies AG AURIXTM, C166TM, CanPAKTM, CIPOSTM, CIPURSETM, EconoPACKTM, CoolMOSTM, CoolSETTM, CORECONTROLTM, CROSSAVETM, DAVETM, DI-POLTM, EasyPIMTM, EconoBRIDGETM, EconoDUALTM, EconoPIMTM, EconoPACKTM, EiceDRIVERTM, eupecTM, FCOSTM, HITFETTM, HybridPACKTM, IRFTM, ISOFACETM, IsoPACKTM, MIPAQTM, ModSTACKTM, my-dTM, NovalithICTM, OptiMOSTM, ORIGATM, POWERCODETM; PRIMARIONTM, PrimePACKTM, PrimeSTACKTM, PRO-SILTM, PROFETTM, RASICTM, ReverSaveTM, SatRICTM, SIEGETTM, SINDRIONTM, SIPMOSTM, SmartLEWISTM, SOLID FLASHTM, TEMPFETTM, thinQ!TM, TRENCHSTOPTM, TriCoreTM. Other Trademarks Advance Design SystemTM (ADS) of Agilent Technologies, AMBATM, ARMTM, MULTI-ICETM, KEILTM, PRIMECELLTM, REALVIEWTM, THUMBTM, VisionTM of ARM Limited, UK. AUTOSARTM is licensed by AUTOSAR development partnership. BluetoothTM of Bluetooth SIG Inc. CAT-iqTM of DECT Forum. COLOSSUSTM, FirstGPSTM of Trimble Navigation Ltd. EMVTM of EMVCo, LLC (Visa Holdings Inc.). EPCOSTM of Epcos AG. FLEXGOTM of Microsoft Corporation. FlexRayTM is licensed by FlexRay Consortium. HYPERTERMINALTM of Hilgraeve Incorporated. IECTM of Commission Electrotechnique Internationale. IrDATM of Infrared Data Association Corporation. ISOTM of INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MATLABTM of MathWorks, Inc. MAXIMTM of Maxim Integrated Products, Inc. MICROTECTM, NUCLEUSTM of Mentor Graphics Corporation. MIPITM of MIPI Alliance, Inc. MIPSTM of MIPS Technologies, Inc., USA. muRataTM of MURATA MANUFACTURING CO., MICROWAVE OFFICETM (MWO) of Applied Wave Research Inc., OmniVisionTM of OmniVision Technologies, Inc. OpenwaveTM Openwave Systems Inc. RED HATTM Red Hat, Inc. RFMDTM RF Micro Devices, Inc. SIRIUSTM of Sirius Satellite Radio Inc. SOLARISTM of Sun Microsystems, Inc. SPANSIONTM of Spansion LLC Ltd. SymbianTM of Symbian Software Limited. TAIYO YUDENTM of Taiyo Yuden Co. TEAKLITETM of CEVA, Inc. TEKTRONIXTM of Tektronix Inc. TOKOTM of TOKO KABUSHIKI KAISHA TA. UNIXTM of X/Open Company Limited. VERILOGTM, PALLADIUMTM of Cadence Design Systems, Inc. VLYNQTM of Texas Instruments Incorporated. VXWORKSTM, WIND RIVERTM of WIND RIVER SYSTEMS, INC. ZETEXTM of Diodes Zetex Limited. Last Trademarks Update 2011-11-11 Datasheet 3 Revision 2.0, 2012-04-13 BCR402U Table of Contents Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 List of Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1 1.1 1.2 1.3 LED Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7 7 7 2 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3 Typical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4 Application hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5 Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Datasheet 4 Revision 2.0, 2012-04-13 BCR402U List of Figures List of Figures Figure 1-1 Figure 3-1 Figure 3-2 Figure 3-3 Figure 3-4 Figure 3-5 Figure 3-6 Figure 3-7 Figure 3-8 Figure 3-9 Figure 3-10 Figure 3-11 Figure 4-1 Figure 4-2 Figure 5-1 Figure 5-2 Figure 5-3 Datasheet Pin configuration and typical application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Total Power Dissipation Ptot = f(TS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Permissible Pulse Load RthJS = f(tp) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Permissible Pulse Load Ptotmax / PtotDC= f(tp) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Output Current versus VS Iout = f(VS), VS - Vout = 1.4 V, Rext = Parameter. . . . . . . . . . . . . . . . . . . . 12 Supply Current versus VS IS = f(VS), TA = Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Output Current versus VS Iout = f(VS), VS - Vout = Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Output Current versus VS Iout = f(VS), VS - Vout = 1.4 V, TA = Parameter. . . . . . . . . . . . . . . . . . . . . 13 Output Current versus Rext Iout = f(Rext), VS = 10 V, VS - Vout = 1.4 V, TA = Parameter . . . . . . . . . . 14 Output Current versus TS Iout = f(TS), VS = 10 V, VS - Vout = 1.4 V, Rext = Parameter . . . . . . . . . . . 14 Reference Voltage Vdrop vs Iout Vdrop = f(Iout), Iout = 10 A to 10 mA . . . . . . . . . . . . . . . . . . . . . . . . 15 Reference Voltage Vdrop vs Iout Vdrop = f(Iout), Iout = 10 mA to 65 mA . . . . . . . . . . . . . . . . . . . . . . . . 15 Application Circuit: Stand alone current source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Application Circuit: Boost mode current source with external power transistor . . . . . . . . . . . . . . . 16 Package Outline for SC74 (dimensions in mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Package Footprint for SC74 (dimensions in mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Tape and Reel Information for SC74 (dimensions in mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5 Revision 2.0, 2012-04-13 BCR402U List of Tables List of Tables Table 2-1 Table 2-2 Table 2-3 Table 2-4 Datasheet Maximum Ratings at TA = 25 C, unless otherwise specified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thermal Resistance at TA = 25 C, unless otherwise specified. . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical Characteristics at TA = 25 C, unless otherwise specified . . . . . . . . . . . . . . . . . . . . . . . . DC Characteristics with stabilized LED load at TA = 25 C, unless otherwise specified . . . . . . . . . 6 9 9 9 9 Revision 2.0, 2012-04-13 BCR402U LED Driver 1 LED Driver 1.1 Features * * * * * * * * * * LED drive current preset to 20 mA Output current adjustable up to 65 mA with an external resistor Easy paralleling of drivers to increase current Supply voltage up to 40 V High current accuracy at supply voltage variation Low voltage overhead of 1.4 V Up to 750 mW power dissipation in a small SC74 package Negative thermal coefficient of -0.2 %/K reduces output current at higher temperatures RoHS compliant (Pb-free) package Automotive qualified according AEC Q101 1.2 * * * * * SC74-3D Applications Channel letters for advertising, LED strips for decorative lighting Aircraft, train, ship illumination Retrofits for general lighting, white goods like refrigerator lighting Medical lighting Automotive applications like CHMSL and rear combination lights 1.3 General Description The BCR402U is a cost efficient LED driver to drive low power LEDs. The advantages towards resistor biasing are: * * * * homogenous light output despite varying forward voltages in different LED strings homogenous light output of LEDs despite voltage drop across long supply lines homogenous light output independent from supply voltage variations longer lifetime of the LEDs due to reduced output current at higher temperatures (negative thermal coefficient) The advantages towards discrete solutions are: * * * * lower assembly cost smaller form factor higher reliability due to less soldering joints higher output current accuracy due to pretested LED drivers Dimming is possible by using an external digital transistor at the ground pin. The BCR402U can be operated at higher supply voltages by putting LEDs between the supply voltage VS and the power supply pin of the LED driver. You can find further details in our application notes. The BCR402U is a perfect fit for numerous low power LED applications by combining small form factor with low cost. These LED drivers offer several advantages to resistors like significantly higher current control at very low voltage drop ensuring high lifetime of LEDs. Datasheet 7 Revision 2.0, 2012-04-13 BCR402U LED Driver Pin Configuration Typical Application +VS 4 VS Rex t (optional ) 6 GND 1 6 Rex t OUT 2 5 OUT Rex t GND OUT 3 4 Vdrop 1 OUT 2,3,5 IS Iout VS Figure 1-1 Pin configuration and typical application Type Marking BCR402U L2s Datasheet Pin Configuration 1 = GND 2; 3; 5 = OUT 4 = VS 8 Package 6 = Rext SC74 Revision 2.0, 2012-04-13 BCR402U Electrical Characteristics 2 Electrical Characteristics Table 2-1 Maximum Ratings at TA = 25 C, unless otherwise specified Parameter Symbol Values Unit Min. Typ. Max. Supply voltage VS - - 40 V Output current Iout - - 65 mA Output voltage Vout - - 40 V Reverse voltage between all terminals VR - - 0.5 V Total power dissipation Ptot - - 750 mW Junction temperature TJ - - 150 C Storage temperature range TSTG -65 - 150 C Note / Test Condition TS 112.5 C Attention: Stresses above the max. values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit. Table 2-2 Thermal Resistance at TA = 25 C, unless otherwise specified Parameter Symbol Values Min. Typ. Unit Note / Test Condition Max. 1) Junction - soldering point RthJS 50 K/W 1) For calculation of RthJA please refer to Application Note AN077 (Thermal Resistance Calculation) Table 2-3 Electrical Characteristics at TA = 25 C, unless otherwise specified Parameter Symbol Values Min. Unit Note / Test Condition Typ. Max. - - V IC = 1 mA, IB = 0 Collector-emitter breakdown voltage VBR(CEO) 40 Supply current IS 340 420 500 A VS = 10 V DC current gain hFE 100 220 470 - IC = 50 mA, VCE = 1 V Internal resistor Rint 38 44 52 IRint = 10 mA Output current Iout 18 20 22 mA VS = 10 V Vout = 8.6 V Voltage drop (VRext) Vdrop 0.8 0.85 0.9 V Iout = 20 mA Table 2-4 DC Characteristics with stabilized LED load at TA = 25 C, unless otherwise specified Parameter Symbol Lowest sufficient supply voltage overhead VSmin Values Unit Note / Test Condition Min. Typ. Max. - 1.4 - V Iout > 18 mA Output current change versusTA Iout/Iout - -0.2 - %/K VS = 10 V Output current change versus VS Iout/Iout - 1 - %/V VS = 10 V Datasheet 9 Revision 2.0, 2012-04-13 BCR402U Typical characteristics 3 Typical characteristics 1000 Ptot [mW] 800 600 400 200 0 0 20 40 60 80 TS [C] 100 120 140 Figure 3-1 Total Power Dissipation Ptot = f(TS) RthJS [K/W] 100 10 D=0 D = 0.005 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 1 0.1 -6 10 10 -5 10 -4 -3 10 tp [s] 10 -2 10 -1 0 10 Figure 3-2 Permissible Pulse Load RthJS = f(tp) Datasheet 10 Revision 2.0, 2012-04-13 BCR402U Typical characteristics Ptotmax / PtotDC 1000 D=0 D = 0.005 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 100 10 1 10-6 10-5 10-4 10-3 tp [s] 10-2 10-1 100 Figure 3-3 Permissible Pulse Load Ptotmax / PtotDC= f(tp) Datasheet 11 Revision 2.0, 2012-04-13 BCR402U Typical characteristics Iout [mA] 100 10 1 Rext = open Rext = 75 Rext = 24 0 5 10 15 20 25 VS [V] Figure 3-4 Output Current versus VS Iout = f(VS), VS - Vout = 1.4 V, Rext = Parameter 2 1.8 1.6 IS [mA] 1.4 1.2 1 0.8 0.6 0.4 80 C 20 C -40 C 0.2 0 0 5 10 15 20 VS [V] 25 30 35 40 Figure 3-5 Supply Current versus VS IS = f(VS), TA = Parameter Datasheet 12 Revision 2.0, 2012-04-13 BCR402U Typical characteristics 25 Iout [mA] 20 15 10 1V 1.4 - 2 V 0 5 10 15 20 VS [V] 25 30 35 40 35 40 Figure 3-6 Output Current versus VS Iout = f(VS), VS - Vout = Parameter 25 Iout [mA] 20 15 10 5 0 -40 C 20 C 80 C 0 5 10 15 20 VS [V] 25 30 Figure 3-7 Output Current versus VS Iout = f(VS), VS - Vout = 1.4 V, TA = Parameter Datasheet 13 Revision 2.0, 2012-04-13 BCR402U Typical characteristics 100 Iout [mA] -40 C 20 C 80 C 10 10 100 Rext [] Figure 3-8 Output Current versus Rext Iout = f(Rext), VS = 10 V, VS - Vout = 1.4 V, TA = Parameter 70 Rext = 18 60 Rext = 27 Iout [mA] 50 Rext = 33 40 Rext = 56 30 Rext = 120 20 Rext = open 10 0 -50 -25 0 25 50 TS [C] 75 100 125 150 Figure 3-9 Output Current versus TS Iout = f(TS), VS = 10 V, VS - Vout = 1.4 V, Rext = Parameter Datasheet 14 Revision 2.0, 2012-04-13 BCR402U Typical characteristics 1.1 1.05 Vdrop [V] 1 0.95 0.9 0.85 typ. min., max. 0.8 10-5 10-4 10-3 10-2 IOUT [A] Figure 3-10 Reference Voltage Vdrop vs Iout Vdrop = f(Iout), Iout = 10 A to 10 mA 1 0.95 Vdrop [V] 0.9 0.85 0.8 0.75 0.7 0.65 0.6 typ. min., max. 10 20 30 40 IOUT [mA] 50 60 70 Figure 3-11 Reference Voltage Vdrop vs Iout Vdrop = f(Iout), Iout = 10 mA to 65 mA Datasheet 15 Revision 2.0, 2012-04-13 BCR402U Application hints 4 Application hints +V S 4 VS 6 Rex t (optional ) Vdrop Rex t GND 1 OUT IS 2,3,5 I out Figure 4-1 Application Circuit: Stand alone current source +V S 4 VS 6 Rex t (optional ) Rex t GND 1 OUT Vdrop I LED 2,3,5 I out R1 R2 IS Figure 4-2 Application Circuit: Boost mode current source with external power transistor Application hints BCR402U serves as an easy to use constant current source for LEDs. In stand alone application an external resistor Rext can be connected to adjust the current between 20 mA and 65 mA. Rext can be determined by using Figure 3-8. Connecting a low tolerance resistor Rext will improve the overall accuracy of the current sense resistance formed by the parallel connection of Rint and Rext leading to an improved current accuracy. Please take into account that the resulting output currents will be slightly lower due to the self heating of the component and the negative thermal coefficient. In boost mode configuration the LED current can be extended to drive high power LEDs. Please visit our web site www.infineon.com/lowcostleddriver for detailed application notes. Datasheet 16 Revision 2.0, 2012-04-13 BCR402U Package Package 2.9 0.2 (2.25) B 1.1 MAX. 0.15 +0.1 -0.06 5 4 1 2 3 0.35 +0.1 -0.05 Pin 1 marking 0.2 1.6 0.1 6 2.5 0.1 (0.35) 0.25 0.1 5 A B 6x M 0.1 MAX. 0.95 0.2 1.9 M A SC74-PO V04 Figure 5-1 Package Outline for SC74 (dimensions in mm) 2.9 1.9 0.5 0.95 SC74-FPR V04 Figure 5-2 Package Footprint for SC74 (dimensions in mm) 0.2 2.7 8 4 Pin 1 marking 3.15 1.15 SC74-TP Figure 5-3 Tape and Reel Information for SC74 (dimensions in mm) Datasheet 17 Revision 2.0, 2012-04-13 BCR402U Terminology Terminology Iout/Iout Output current change hFE DC current gain IEN Enable current ILED LED current Iout Output current IR Reverse current LED Light Emitting Diode PCB Printed Circuit Board Ptot Total power dissipation PWM Pulse Width Modulation RB Bias resistor Rext External resistor Rint Internal resistor RoHs Restriction of Hazardous Substance directive RthJS Thermal resistance junction to soldering point TA Ambient temperature TJ Junction temperature TS Soldering point temperature Tstg Storage temperature VBR(CEO) Collector-emitter breakdown voltage VBR Breakdown voltage Vdrop Voltage drop VEN Enable voltage Vout Output voltage VR Reverse voltage VS Supply voltage VSmin Lowest sufficient supply voltage overhead Datasheet 18 Revision 2.0, 2012-04-13 w w w . i n f i n e o n . c o m Published by Infineon Technologies AG