105
SUMICON 1600 SERIES RECTANGULAR CONNECTORS
The SUMICON 1600 series are multi-contact connec-
tors designed by Hirose. 8, 12, 16, 20, 24, 28, 34, 45
and 60-contact models available (same as the 1300
series). The connector units are available in three
types: soldering, wrapping, and crimping. Accessories
are C case, CA case, CBA case, ST stopper, STA stop-
per, and STB stopper, By combining the many options
noted above, the SUMICON 1600 series connectors
meet a wide variety applications.
In the SUMICON 1600 series, the connector unit is
completely separated from the accessories such as the
cases and stoppers to diversify the specificaions and
facilitate wiring connection. The SUMICON 1600
series are specified in the NTT specifications No.1931.
Standard Type
General
(1) Shape of terminal opening
P: Male terminal
S: Female terminal
(2) Terminal connection method
No sign: Soldering
W: Wrapping C: Crimp
(3) Series No.
16: 1600 series
(4) Number of contacts 34: 34 contacts
(5) Serial sign for connctor units
Provided with a sequence of upper-case alphabetic charac-
ters.
No sign or sign other than W: Soldering
Sequence: No sign, B, C, D, E ...
(6) Plating
A: Silver-plated
G: Gold-plated
(7) Signs for accessories
C: Plug case
ST: Stopper bracket with horizontal cable inlet opening
J: Jack Case
H: Handle
DB: Deep bracket
(8) Serial signs for accessories
Each accessory (C, ST, J, H, DB) is provided with sequence of
upper-case. alphabetic characters.
Sequence: No sign, A, B, C...
Accessories, C, ST, or J followed by no sign: Side lock
types
Accessories, C and ST followed By A: Top touch lock type
Note: The space for no sign is filled sequentially.
(9) Special specification, ( ) is filled with a serial number,
except for the case and bracket, for which the following ap-
ply.
(51): Bracket only
(50): Case only
Ordering Information
PW1634□ AC□ ()
(1) (2) (3) (4) (5) (6) (7) (8) (9)
Electrical Characteristics
Item Standard
Contact
Resistance
7mΩ max.
atDC1A
Insulation
Resistance
1000MΩ min.
atDC500V
Withstand
Voltage AC1000Vfor1minute
CurrentRating 3A
VoltageRating 300VAC
Part
Insulator
MaleTerminal
FemaleTerminal
PlugCase
StopperBracket
Material
Glassfilled
diallylphthalateresin
Brass
Phosphorbronze
ABSresin(black)
Steel
Finish
Blue
TypeA:Silver-plated
TypeG:Gold-plated
NTTspec:ABSresin,
2.5PB6.0/2.0(color)
Nickelplating
Applicable
wire
AWG
Applicable
wire(mm)
Max.coating
O.D.(mm)
26
0.41
0.95
Ordinary
wrapping
about8
2wrap
28
0.32
0.75
Coating
onewrap
about8
30
0.26
0.6
Coating
onewrap
about9
Wrappingmethod
Effectivenumberofwrappings
Numberofwrappings
perterminal
Material and Finish
Wire Wrapping Specifications
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
106
Cross Reference to NTT No.
Type NTTNo. ShortForm HRSNo. PartNo.
Plug
Type NTTNo. ShortForm HRSNo. PartNo.
Receptacle
CN-5445GJMSA
CN-6760GJMSA
CN-3320G2JMSA
CN-3724G2JMSA
CN-4028G2JMSA
CN-4534G2JMSA
CN-6760G2JMSA
CN-3320GJFSA
CN-3724GJFSA
CN-4028GJFSA
CN-4028G2JFSA
CN-4534G2JFSA
CN-5445G2JFSA
CN-6760G2JFSA
45GJMSA
60GJMSA
20G2JMSA
24G2JMSA
28G2JMSA
34G2JMSA
60G2JMSA
20GJFSA
24GJFSA
28GJFSA
28G2JFSA
34G2JFSA
45G2JFSA
60G2JFSA
CL216-0257-9-51
CL216-0258-1-51
CL216-0292-0-51
CL216-0293-2-51
CL216-0294-5-51
CL216-0296-0-51
CL216-0298-6-51
CL216-0151-8-51
CL216-0148-3-51
CL216-0152-0-51
CL216-0313-8-51
CL216-0299-9-51
CL216-0300-6-51
CL216-0301-9-51
P-1645BA-STA(51)
P-1660BA-STA(51)
PW-1620BA-STA(51)
PW-1624BA-STA(51)
PW-1628BA-STA(51)
PW-1634BA-STA(51)
PW-1660BA-STA(51)
S-1620A-STA(51)
S-1624A-STA(51)
S-1628A-STA(51)
SW-1628A-STA(51)
SW-1634A-STA(51)
SW-1645A-STA(51)
SW-1660A-STA(51)
CN-3320GLWPMSA
CN-4028GLWPMSA
CN-4534GLWPMSA
CN-5445GLWPMSA
CN-6760GLWPMSA
CN-3320GLWPFSA
CN-3724GLWPFSA
CN-4028GLWPFSA
CN-4534GLWPFSA
CN-5445GLWPFSA
CN-6760GLWPFSA
20GLWPMSA
28GLWPMSA
34GLWPMSA
45GLWPMSA
60GLWPMSA
20GLWPFSA
24GLWPFSA
28GLWPFSA
34GLWPFSA
45GLWPFSA
60GLWPFSA
CL216-0247-5-51
CL216-0249-0-51
CL216-0250-0-51
CL216-0251-2-51
CL216-0252-5-51
CL216-0153-3-51
CL216-0154-6-51
CL216-0155-9-51
CL216-0126-0-51
CL216-0127-3-51
CL216-0128-6-51
P-1620BA-CA(51)
P-1628BA-CA(51)
P-1634BA-CA(51)
P-1645BA-CA(51)
P-1660BA-CA(51)
P-1620A-CA(51)
P-1624A-CA(51)
P-1628A-CA(51)
P-1634A-CA(51)
P-1645A-CA(51)
P-1660A-CA(51)
Receptacle
CN-3724GJMSA
CN-4028GJMSA
CN-4534GJMSA
24GJMSA
28GJMSA
34GJMSA
CL216-0254-0-51
CL216-0255-3-51
CL216-0256-6-51
P-1624BA-STA(51)
P-1628BA-STA(51)
P-1634BA-STA(51)
Note:NTTTypesareallassembledwithconnectorinsertsandplugshellsorstopperbrackets.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
107
Soldering Eyelet Pin Connector
P-1634BA(09)
S-1634A(09)
No.of
Pin
PartNo.
AType
HRSNo. ARoHS
8
12
16
20
24
28
34
45
60
CL216-0171-5-09
CL216-0172-8-09
CL216-0173-0-09
CL216-0174-3-09
CL216-0175-6-09
CL216-0176-9-09
CL216-0177-1-09
CL216-0178-4-09
CL216-0179-7-09
P-1608BA(09)
P-1612BA(09)
P-1616BA(09)
P-1620BA(09)
P-1624BA(09)
P-1628BA(09)
P-1634BA(09)
P-1645BA(09)
P-1660BA(09)
25
30
35
33
37
40
45
54
67
YES
Unit:mm
Male Connector
Female Connector
SolderHole
SolderHole
PartNo.
GType
HRSNo.
CL216-0180-6-09
CL216-0181-9-09
CL216-0182-1-09
CL216-0183-4-09
CL216-0184-7-09
CL216-0185-0-09
CL216-0186-2-09
CL216-0187-5-09
CL216-0188-8-09
P-1608BG(09)
P-1612BG(09)
P-1616BG(09)
P-1620BG(09)
P-1624BG(09)
P-1628BG(09)
P-1634BG(09)
P-1645BG(09)
P-1660BG(09)
B
19
24
29
27
31
34
39
48
61
C
10
10
10
13
13
13
13
13
13
D
13
18
23
21
25
28
33
42
55
E
8
8
8
11
11
11
11
11
11
No.of
Pin
PartNo.
AType
HRSNo. ARoHS
8
12
16
20
24
28
34
45
60
CL216-0001-5-09
CL216-0002-8-09
CL216-0003-0-09
CL216-0004-3-09
CL216-0005-6-09
CL216-0006-9-09
CL216-0007-1-09
CL216-0008-4-09
CL216-0009-7-09
S-1608A(09)
S-1612A(09)
S-1616A(09)
S-1620A(09)
S-1624A(09)
S-1628A(09)
S-1634A(09)
S-1645A(09)
S-1660A(09)
25
30
35
33
37
40
45
54
67
YES
Unit:mm
PartNo.
GType
HRSNo.
CL216-0055-4-09
CL216-0056-7-09
CL216-0057-0-09
CL216-0058-2-09
CL216-0059-5-09
CL216-0060-4-09
CL216-0061-7-09
CL216-0062-0-09
CL216-0063-2-09
S-1608G(09)
S-1612G(09)
S-1616G(09)
S-1620G(09)
S-1624G(09)
S-1628G(09)
S-1634G(09)
S-1645G(09)
S-1660G(09)
B
19
24
29
27
31
34
39
48
61
C
10
10
10
13
13
13
13
13
13
D
13
18
23
21
25
28
33
42
55
E
8
8
8
11
11
11
11
11
11
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
108
Wire Wrapping Pin Connector
PW-1634BA(09)
SW-1634A(09)
No.of
Pin
PartNo.
AType
HRSNo. ARoHS
8
12
16
20
24
28
34
45
60
CL216-0198-1-09
CL216-0199-4-09
CL216-0200-1-09
CL216-0201-4-09
CL216-0202-7-09
CL216-0203-0-09
CL216-0204-2-09
CL216-0205-5-09
CL216-0206-8-09
PW-1608BA(09)
PW-1612BA(09)
PW-1616BA(09)
PW-1620BA(09)
PW-1624BA(09)
PW-1628BA(09)
PW-1634BA(09)
PW-1645BA(09)
PW-1660BA(09)
25
30
35
33
37
40
45
54
67
YES
Unit:mm
Male Connector
Female Connector
WrapPost0.5×0.7
WrapPost0.5×0.7
PartNo.
GType
HRSNo.
CL216-0216-1-09
CL216-0217-4-09
CL216-0218-7-09
CL216-0219-0-09
CL216-0220-9-09
CL216-0221-1-09
CL216-0222-4-09
CL216-0223-7-09
CL216-0224-0-09
PW-1608BG(09)
PW-1612BG(09)
PW-1616BG(09)
PW-1620BG(09)
PW-1624BG(09)
PW-1628BG(09)
PW-1634BG(09)
PW-1645BG(09)
PW-1660BG(09)
B
19
24
29
27
31
34
39
48
61
C
10
10
10
13
13
13
13
13
13
D
13
18
23
21
25
28
33
42
55
E
8
8
8
11
11
11
11
11
11
No.of
Pin
PartNo.
AType
HRSNo. ARoHS
8
12
16
20
24
28
34
45
60
CL216-0189-0-09
CL216-0190-0-09
CL216-0191-2-09
CL216-0192-5-09
CL216-0193-8-09
CL216-0194-0-09
CL216-0195-3-09
CL216-0196-6-09
CL216-0197-9-09
SW-1608A(09)
SW-1612A(09)
SW-1616A(09)
SW-1620A(09)
SW-1624A(09)
SW-1628A(09)
SW-1634A(09)
SW-1645A(09)
SW-1660A(09)
25
30
35
33
37
40
45
54
67
YES
Unit:mm
PartNo.
GType
HRSNo.
CL216-0207-0-09
CL216-0208-3-09
CL216-0209-6-09
CL216-0210-5-09
CL216-0211-8-09
CL216-0212-0-09
CL216-0213-3-09
CL216-0214-6-09
CL216-0215-9-09
SW-1608G(09)
SW-1612G(09)
SW-1616G(09)
SW-1620G(09)
SW-1624G(09)
SW-1628G(09)
SW-1634G(09)
SW-1645G(09)
SW-1660G(09)
B
19
24
29
27
31
34
39
48
61
C
10
10
10
13
13
13
13
13
13
D
13
18
23
21
25
28
33
42
55
E
8
8
8
11
11
11
11
11
11
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
109
Side Touch Lock Type Plug Shell
P-1634A-C(50)
Side Touch Lock Type Receptacle Bracket
P-1634A-ST(51)
No.ofPin
PartNo.HRSNo. A RoHS
8
12
16
20
24
28
34
45
60
CL216-0028-1-50
CL216-0029-4-50
CL216-0030-3-50
CL216-0031-6-50
CL216-0032-9-50
CL216-0033-1-50
CL216-0034-4-50
CL216-0035-7-50
CL216-0036-0-50
P-1608A-C(50)
P-1612A-C(50)
P-1616A-C(50)
P-1620A-C(50)
P-1624A-C(50)
P-1628A-C(50)
P-1634A-C(50)
P-1645A-C(50)
P-1660A-C(50)
29
34
39
37
41
44
49
58
71
YES
Unit:mm
Note:All these products are plug cases only. Order connector units separately.
Thecasescanbeusedforbothmaleandfemaleconnectorunits.Thecases
markedwithanasteriskareofstandardspecifications.
B
20
20
20
23
23
23
23
23
23
C
14.5
14.5
14.5
17.5
17.5
17.5
17.5
17.5
17.5
D
42
43.5
46
45.5
46.5
47.5
50.5
54.5
59.5
E
7.5
7.5
7.5
11
11
11
11
11
11
F
7.5
9
11.5
11
12
13
16
19
24
G
12.5
13.5
14.5
14.5
15
15.5
17
18.5
21
H
12.5
13.5
14.5
14.5
15
15.5
17
19.5
22
No.ofPin
PartNo.HRSNo. A RoHS
8
12
16
20
24
28
34
45
60
CL216-0046-3-51
CL216-0047-6-51
CL216-0048-9-51
CL216-0049-1-51
CL216-0050-0-51
CL216-0051-3-51
CL216-0052-6-51
CL216-0053-9-51
CL216-0054-1-51
P-1608A-ST(51)
P-1612A-ST(51)
P-1616A-ST(51)
P-1620A-ST(51)
P-1624A-ST(51)
P-1628A-ST(51)
P-1634A-ST(51)
P-1645A-ST(51)
P-1660A-ST(51)
27
32
37
35
39
42
47
56
69
YES
Unit:mm
Note:Alltheseproductsarestopper brackets only. Order connector
units separately. The cases can be used for both male and
femaleconnector units. The brackets marked with an asterisk
areofstandardspecifications.
B
19
24
29
27
31
34
39
48
61
C
13.6
13.6
13.6
16.6
16.6
16.6
16.6
16.6
16.6
D
9.2
9.2
11
11
11
11
11
15
15
E
15.5
15.5
15.5
18.5
18.5
18.5
18.5
18.5
18.5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
110
Top Touch Lock Type Plug Shell
P-1634A-CA(50)
Side Touch Lock Type Receptacle Bracket
P-1634A-STA(51)
No.ofPin
PartNo.HRSNo. A RoHS
20
24
28
34
45
60
CL216-0149-6-50
CL216-0147-0-50
CL216-0150-5-50
CL216-0111-3-50
CL216-0112-6-50
CL216-0113-9-50
P-1620A-CA(50)
P-1624A-CA(50)
P-1628A-CA(50)
P-1634A-CA(50)
P-1645A-CA(50)
P-1660A-CA(50)
37
41
44
49
58
71
YES
Unit:mm
Note:Alltheseproductsare plugcasesonly.Orderconnectorunits
separately.Thecasescan be usedforbothmaleandfemaleconnector
units.Thecasesmarkedwithanasteriskareofstandardspecifications.
B
20
20
20
20
20
20
C
51
51
53
56
60
65
D
11
11
11
11
11
11
E
11
12
13
16
19
24
E
18
18.5
20
21.5
24
26.5
E
14.5
15
15.5
17
18.5
21
No.ofPin
PartNo.HRSNo. A RoHS
20
24
28
34
45
60
CL216-0156-1-51
CL216-0157-4-51
CL216-0158-7-51
CL216-0123-2-51
CL216-0124-5-51
CL216-0125-3-51
P-1620A-STA(51)
P-1624A-STA(51)
P-1628A-STA(51)
P-1634A-STA(51)
P-1645A-STA(51)
P-1660A-STA(51)
33
37
40
45
54
67
YES
Unit:mm
Note:Alltheseproductsarestopperbracketsonly.Order
connectorunits separately. Thecases can beused
for both male and female connector units. The
brackets marked with an asterisk are of standard
specifications.
B
27
31
34
39
48
61
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
111
Side Touch Lock Type Jack Shell (For Extension Cable)
S-1634A-J(50)
Top Touch Lock Type Stopper Bracket
1645STA-DC
No.ofPin
PartNo.HRSNo. A RoHS
20
24
28
34
45
60
CL216-0139-2-50
CL216-0140-1-50
CL216-0141-4-50
CL216-0142-7-50
CL216-0225-2-50
CL216-0226-5-50
S-1620A-J(50)
S-1624A-J(50)
S-1628A-J(50)
S-1634A-J(50)
S-1645A-J(50)
S-1660A-J(50)
37
41
44
49
58
71
YES
Unit:mm
Note:All these products are jack cases only. Order connector units separately.
Thecasescanbeusedforfemaleconnectorunitsonly.
B
23
23
23
23
23
23
C
17.5
17.5
17.5
17.5
18.5
18.5
D
45.5
46.5
47.5
50.5
54.5
59.5
E
11
11
11
11
11
11
F
11
12
13
16
19
24
G
14.5
15
15.5
17
18.5
21
H
14.5
15
15.5
17
19.5
22
No.ofPin
PartNo.HRSNo. A RoHS
20
24
28
34
45
60
CL216-0321-6
CL216-0322-9
CL216-0323-1
CL216-0324-4
CL216-0325-7
CL216-0326-0
1620STA-DC
1624STA-DC
1628STA-DC
1634STA-DC
1645STA-DC
1660STA-DC
38.3
42.3
45.3
50.3
59.3
72.3
YES
Unit:mm
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
112
SHOULDER-TOUCH LOCK TYPE
The shoulder-touch lock type plug cases are highly re-
liable, lightweight, sturdy, and operable. 8, 12, and
16-contact models are available. Hirose high-density
packging plug cases, including the top-touch lock
type, are available in 8 to 60-contact models.
General
Material and Finish
Description Material Finish
Plugcase Polypropyleneresin Black
Stopper Steel Nickelplating
Plug Case
1616-CBA(50)
Stopper
1600-STB(05)
No.ofPin
PartNo.HRSNo. A RoHS
8
12
16
CL216-0416-0-50
CL216-0417-3-51
CL216-0418-6-50
1608-CBA(50)
1612-CBA(51)
1616-CBA(50)
14
14
14
YES
Unit:mm
Note:Order connector units separately. The cases can be used for both
maleandfemaleconnectorunits.Thecasesmarkedwithanasterisk
areofstandardspecifications.
B
35
40
45
C
40
41
42
D
45
46
47
E
9
11.5
7.5φ
F
7.5
7.5
PartNo.HRSNo. Remark RoHS
Note:Orderconnectorunitsseparately.Thecasesmakedwithan
asteriskareofstandardspecifications.
CL216-0302-1-05 1600-STB(05) Commonforanysize YES
Note: Mounted on a connector unit
(Each package contains two stoppers)
How to Mount
ConnectorUnit
Stopper
M2.6Screw
Panel
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
113
Item Standard
ContactResistance 7mΩ orlessatDC1A(contactonly)
Insulation
Resistance 5,000MΩ ormoreatDC500V
WithstandVoltage AC1,000Vfor1minute
RatingCurrent 3A
ApplicableCable AWG#24-28(CoatingO.D.1.6φ-0.9φ)
Cable
Crimpingstrength
(Unit:kgormore) Crimping
force
AWG#24
3.6
AWG#26
2.4
AWG#28
1.6
Part
Insulator
Material
Glass-containing
polycarbonateresinUL94V-0
Finish
Blue
Male
Terminal Brass Gold-plated
Silver-Plated
Female
Terminal Phosphorbronze Gold-plated
Silver-Plated
1600 SUMICON CRIMP TYPE CONNECTORS
The SUMICON 1600 series are
high-performance compact crimp
type connectors developed for
labor saving in connection work.
8, 12, 16, 20, 24, 34, 45 and 60-
contact models are available. All
models are compatible with our
previous top-lock type plig
cases. For using the connectors
separately, easy-to-mount plastic
locks are available to expand
their functions.
General
1. Since this is a press-fit type connector, anyone can
performe wiring securely with high reliability.
2. For contact, a two-point contact system is em-
ployed for outstanding reliability, It asiso offers su-
perior mechanical strength.
3. The Sumicon 1600 Series Press-Fit Type Connec-
tors are interchangeable with the conventional sol-
der, DIP and lapping type connectors. They are
applicable, therfore, to a wider range of applica-
tions.
4 To use connector unit separately, jointly em-
ploying an easily installable plastic lock will pre-
vent vibrations and/or cable dead weight from un-
plugging the connector. The plastic lock, moreov-
er, can be used with either center-suspension or
panel-mount system.
5 All wiring spliced with the connector is hidden
completely inside the housing, allowing for perfect
insulation.
Features
Orderig Information
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
114
Housing
Contact
No.ofPin
PartNo.HRSNo. L RoHS
8
12
16
20
24
28
34
45
60
CL216-0335-0
CL216-0336-3
CL216-0337-6
CL216-0338-9
CL216-0339-1
CL216-0340-0
CL216-0341-3
CL216-0342-6
CL216-0343-9
PC-1608
PC-1612
PC-1616
PC-1620
PC-1624
PC-1628
PC-1634
PC-1645
PC-1660
25
30
35
33
37
40
45
54
67
YES
Unit:mm
P
19
24
29
27
31
34
39
48
61
W
10
10
10
13
13
13
13
13
13
No.ofPin
PartNo.HRSNo. L RoHS
8
12
16
20
24
28
34
45
60
CL216-0344-1
CL216-0345-4
CL216-0346-7
CL216-0347-0
CL216-0348-2
CL216-0349-5
CL216-0350-4
CL216-0351-7
CL216-0352-0
SC-1608
SC-1612
SC-1616
SC-1620
SC-1624
SC-1628
SC-1634
SC-1645
SC-1660
25
30
35
33
37
40
45
54
67
YES
Unit:mm
P
19
24
29
27
31
34
39
48
61
W
10
10
10
13
13
13
13
13
13
Male Contact Female Contact
Note:Loose-pieceterminalsareavailableinpacks.Eachpackcontains100
terminals. Strip terminals are available in reels. Each reel contains
10,000terminals.
Type PartNo.HRSNo. Plating RoHS
Loose
Chain
CL216-0331-0
CL216-0332-2
CL216-0363-6
CL216-0364-9
PC-1600-111
PC-1600-112
PC-1600-211
PC-1600-212
Gold
Silver
Gold
Silver
YES
Type PartNo.HRSNo. Plating RoHS
Loose
Chain
CL216-0331-0
CL216-0332-2
CL216-0363-6
CL216-0364-9
PC-1600-111
PC-1600-112
PC-1600-211
PC-1600-212
Gold
Silver
Gold
Silver
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
115
Tools
Hand Crimp Tool TC-1600-111 Contact Extractor TC-1600-21
Type PartNo.HRSNo.
Manualcrimpingtool
Contactextractor
CL250-0003-1
CL250-0004-4
TC-1600-111
TC-1600-21
Ordering Informations
Housing
※  C16 ※※
No. of contact
Series No.
Crimp type
P: Male, S: Female
Contact
※  C1600 ※ ※ ※
1: Gold-plated
2: Silver-plated
Series No.
Crimp type
P: Male contact
S: Female contact
Applicable cable
1: AWG24-28
1: Loose piece contact
2: Strip contact
(1) Take care when removing the connectors to pull
out by the housing and not tug on the wires.
(2) The male terminals of the connectors will be bent
if the connectors are twisted when being removed.
Take care to pull the characters out straight.
(3) The plastic locks are sufficiently strong to ensure
that the connector engagement will not be
loosened by vibration or the weight of the wires.
Their strength is not sufficient for other loads.
When strngth for some other load is required, use
the top-touch lock type plug case (common for
both solder and wrapping types).
(4) Both gold-plated and silver-plated terminals are
available. Use the gold-plated type in adverse en-
vironments. In other environments. we recommend
the economical silver-plated type.
(5) For crimping, use a manual crimping device for
low-volume crimping and maintenance. For high-
volume crimping. we recommend the automatic
crimping machine shown on page 124.
(6) For plug-in uses, we recommend Sumicon 1600
series solder or wrapping types for improved func-
tionality.
Using the Connectors
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
116
Assembling Procedure
Procedure for Contact Extraction
Malecontact
Wire
about3.5mm
Femalecontact Crimpedstate
Pincontacthousing
Low-numberedside
Low-numberedside
Socketcontacthousing
Afterassembling,pull
the wire slightly and
makesureifthecon-
tactismountedas
shownabove.
Extraction
Shell
Fig. 1 Fig. 2
In case of extracting a contact from the housing due to
insertion error or circuit change, follow the steps as shown below.
1 Hold the Contact Extractor as shown in Fig. 1, plac-
ing the tip of the Extractor on the tip of a contact,
then insert it between the contact and the housing.
2. When the tip of the Extractor comes into contact
with a stepped part in the housing, the spring will
come off from the stepped part with a snap which
can be felt. Then, extract the contact by pulling the
wire.
0. (Caution: Pushing the tip of the extractor forcibly
before the spring has come off from the stepped
part may damage the contact).
3. Above Fig. 1 and Fig. 2 show how to extract a con-
tact from socket housing. The same procedure
can be employed to extract a contact from pin
housing.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
117
Polarization of SUMICON 1600 series can be achieved
by contact arrangement. The crimp type contacts are
designed to float a little, so that the use of a Polarizing
Key is recommended in order to ensure positive polar-
izatiom.
1. When crimp types are used in both the male and
female, do not fill all cavities with contacts. Use
Polarizing Key at minimum 2 cavities of Socket
housing as shown below and do not fill pin con-
tacts at the corresponding cavities of male hous-
ing.
2. When male crimp type is used in combination with
solder or wire wrap female type, the connector
coupling shall be done corefully not to couple in
reverse position. Couplimg shall be made by
matching of traiangle marks on connector inserts.
Use of Connectors with Respect to Polarity
(to prevent mis-insertion of connectors)
In Case of 8, 12 and 16 contact
1. SUMICON 1600 series are naturally polarized in all
cavities filled with contacts. When all cavities are
not filled, Polarizing Keys shall be inserted in
vacant cavities to the minimum for preventing
reverse coupling. But when Top Touch Lock Plug
Shell is used, Polarizing Keys are not necessary
because Plug Shell has polarized mechanism.
2. When male crimp type is used with some vacant
cavities in combination with solder or wire wrap
female type, Top Touch Lock Plug Shell is recom-
mended.
In case of Multi Pin Type more than 20 contact
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
118
Handle
1634-H(50)
HRSNo.
No.ofPin
PartNo. A B
RoHS
CL216-0135-1-50
CL216-0136-4-50
CL216-0137-7-50
16
34
60
1616-H(50)
1634-H(50)
1660-H(50)
36
46
68
25
30
30
YES
C
6
6
8
D
29
39
61
Unit:mm
Deep Bracket
Crimp or any Connector Unit
Polarizing Key
1634-DB
HRSNo.
No.ofPin
PartNo.
RoHS
CL216-0138-0
34
1634-DB
YES
Unit:mm
1600-LC
How to Mount
Molding
Commonforsolder,wirewrap,
crimporanyconnectorunit
PartNo.HRSNo. RoHS
CL216-0354-5 1600-LC YES
PartNo.HRSNo. RoHS
CL216-0487-9 PolarizingKey YES
How to Mount
Polarizing Key
Molding
The polarizing key (material: SC-16 ) can be used for
any type of female housing. For handling, seeNotes on
connector polarity (prevention of misinsertionon 124page
ofthismanual.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
119
Terminal Arrangment and Numbers
Connector Mounting Hole Dimensions
The figure shows a male connector as viewed from the termination side
8 pin 12 pin 16 pin 20 pin 24 pin 28 pin 34 pin 45 pin 60 pin
No.ofContact
screwA
8
12
16
20
24
28
34
45
60
M2.6
19
24
29
27
31
34
39
48
61
B
13.5
18.5
23.5
21.5
25.5
28.5
33.5
42.5
55.5
C
8.5
8.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
Unit:mm
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
121
SUMICON 1600 SERIES DIP SOLDERING CONNECTORS
The SUMICON 1600 series are original Hirose rec-
tangular dip soldering connectors 8, 12, 16, 20, 24, 34, 45
and 60-contact models are available. All models are
compatible with the previous 1600 series in mounting
and accessories.
General
1. Allows straight dip soldering onto a PCB, and is
effective in PCB-to-PCB and PCB-to-cable con-
nection.
2. Suitable for use in interface, being compact and
lightweight and meeting high-density packaging
requirements.
3. Further cuts interconnection costs when simple
locks are used.
4. A wide variety of combinations of connection
methods available, e.g., dip soldering, wrapping,
and crimping, to meet your requirements.
Features
Computers, peripherals and terminals, data com-
munications equipment, measuring instruments,
signal equipment, mobile radio equipment, copier, and
FAX machine.
Main Applications
Electrical and Environmental
Orderig Information
Performance
Contact
Resistance 7mΩ orlessatDC1A
Insulation
Resistance
1,000MΩ orhigher
atDC500V
Withstand
Voltage AC1,000Vfor1minute
Currentcapacity 3A
Materialandfinish
Insulator
MaleTerminal
FemaleTerminal
Glass-Filleddiallylphtalateresin
Bress
Phosphorbronze
TypeA:Silver-plated
TypeB:Gold-plated
(1) Shape of terminal opening
P: Male terminal
S: Female terminal
(2) Terminal connection method
D: Dip soldering
(3) Series No.
16: 1600 series
(4) Number of contacts
(5) Serial sign for connctor units
Provided with a sequence of upper-case alphabetic
characters.
Sequence: No sign, B, C, D, E ...
(6) Plating
A: Silver plated
B: Gold plated
(7) Signs for accessories
SP: Spacer for dip soldering
(8) Serial signs for accessories
Each accessory is provided with a sequence A of
upper-case alphabetic characters. Sequence: No
sign, A, B ...
(9) Specification
(09) : Standard
PD1634□ ASP□
09
(1) (2) (3) (4) (5) (6) (7) (8) (9)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
122
Dip Soldering Type Connector
PD-1634BA(09)
Male Connector
DipPost0.5×0.5
No.of
Pin
PartNo.
AType
HRSNo. ARoHS
8
12
16
20
24
28
34
45
60
CL216-0388-7-09
CL216-0389-0-09
CL216-0390-9-09
CL216-0391-1-09
CL216-0392-4-09
CL216-0393-7-09
CL216-0394-0-09
CL216-0395-2-09
CL216-0396-5-09
PD-1608BA(09)
PD-1612BA(09)
PD-1616BA(09)
PD-1620BA(09)
PD-1624BA(09)
PD-1628BA(09)
PD-1634BA(09)
PD-1645BA(09)
PD-1660BA(09)
25
30
35
33
37
40
45
54
67
YES
Unit:mm
PartNo.
GType
HRSNo.
CL216-0406-7-09
CL216-0407-0-09
CL216-0408-2-09
CL216-0409-5-09
CL216-0410-4-09
CL216-0411-7-09
CL216-0412-0-09
CL216-0413-2-09
CL216-0414-5-09
PD-1608BG(09)
PD-1612BG(09)
PD-1616BG(09)
PD-1620BG(09)
PD-1624BG(09)
PD-1628BG(09)
PD-1634BG(09)
PD-1645BG(09)
PD-1660BG(09)
B
19
24
29
27
31
34
39
48
61
C
10
10
10
13
13
13
13
13
13
D
13
18
23
21
25
28
33
42
55
E
8
8
8
11
11
11
11
11
11
SD-1634A(09)
Female Connector
DipPost0.5×0.5
No.of
Pin
PartNo.
AType
HRSNo. ARoHS
8
12
16
20
24
28
34
45
60
CL216-0379-6-09
CL216-0380-5-09
CL216-0381-8-09
CL216-0382-0-09
CL216-0383-3-09
CL216-0384-6-09
CL216-0385-9-09
CL216-0386-1-09
CL216-0387-4-09
SD-1608BA(09)
SD-1612BA(09)
SD-1616BA(09)
SD-1620BA(09)
SD-1624BA(09)
SD-1628BA(09)
SD-1634BA(09)
SD-1645BA(09)
SD-1660BA(09)
25
30
35
33
37
40
45
54
67
YES
Unit:mm
PartNo.
GType
HRSNo.
CL216-0397-8-09
CL216-0398-0-09
CL216-0399-3-09
CL216-0400-0-09
CL216-0401-3-09
CL216-0402-6-09
CL216-0403-9-09
CL216-0404-1-09
CL216-0405-4-09
SD-1608BG(09)
SD-1612BG(09)
SD-1616BG(09)
SD-1620BG(09)
SD-1624BG(09)
SD-1628BG(09)
SD-1634BG(09)
SD-1645BG(09)
SD-1660BG(09)
B
19
24
29
27
31
34
39
48
61
C
10
10
10
13
13
13
13
13
13
D
13
18
23
21
25
28
33
42
55
E
8
8
8
11
11
11
11
11
11
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
123
Dip Spacer
HRSNo. PartNo. Application
CL216-0419-9 D-1600-SPA Connectorunitpacking
(applicableformodelswithanynumberofcontacts)
CL216-0420-8 D-1600-SPB ForpackingwithConnectorunitstopper
(applicableformodelswithanynumberofcontacts)
Mountingscrewsmustbesuppliedbythecustomer
Pinconnectors Socketconnector
Pinconnectors
withoutBrackets
D-1600-SPA
Screw(M2.6×0.45×12)
Nut(M2.6×0.45)
P.C.B
Socketconnector
withoutBrackets
D-1600-SPA
Screw(M2.6×0.45×12)
Nut(M2.6×0.45)
P.C.B
D-1600-SPA
Maleconnectorwithside-locktypestopperbracket Femaleconnectorwithside-locktypestopper
bracket
Maleconnector
withST
D-1600-SPB
Screw(M2.6×0.45×12)
Nut(M2.6×0.45)
P.C.B
Femaleconnector
withST
D-1600-SPB
Screw(M2.6×0.45×12)
Nut(M2.6×0.45)
P.C.B
Maleconnectorwithtop-touch-locktypestopper
bracket
Femaleconnectorwithtop-touch-locktypestopper
bracket
Maleconnector
withST
D-1600-SPB
Screw(M2.6×0.45×12)
Nut(M2.6×0.45)
P.C.B
Femaleconnector
withST
D-1600-SPB
Screw(M2.6×0.45×12)
Nut(M2.6×0.45)
P.C.B
D-1600-SPB
Note1:Theconnectorunitpackagingspacer(SPA)cannotbeusedforpackingwiththeconnectorunitstopperbracket.
Note1:Thepackagingspacerwithconnectorunitstopperbracket(SPB)cannotbeusedforpackagingtheconnectorunit.
Note2:Providetwospacers(SPAandSPB)foreachconnectorunit.
Thedimensionsmarkedwithanasterisk(*)areforPCBsof1.6mminthickness.
1. When disconnecting, pull it as straight as possible, because the male pins might be damaged if it is
twisted.
2. Connctors are available with gold to be used in adverse environmental conditions and silver-
plated pins be used in ordinary conditions.
How to use connectors
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009