INTEGRATED CIRCUITS DIVISION
www.ixysic.com
DS-LCB710-R02 1
LCB710
Single-Pole, Normally Closed
OptoMOS® Relay
e3
Pb
Part # Description
LCB710 6-Lead DIP (50/Tube)
LCB710S 6-Lead Surface Mount (50/Tube)
LCB710STR 6-Lead Surface Mount (1000/Reel)
Parameter Rating Units
Load Voltage 60 VP
Load Current 1 Arms / ADC
On-Resistance (max) 0.6
LED Current to Operate 2 mA
Applications
Features
Description
Approvals
Ordering Information
Pin Configuration
Switching Characteristics
of Normally Closed Devices
LCB710 is a single-pole normally closed
(1-Form-B) solid state relay that uses optically
coupled technology to provide an enhanced 3750Vrms
isolation barrier between the input and the output of
the relay. The efficient MOSFET switches use IXYS
Integrated Circuits Division's patented OptoMOS
architecture. The optically coupled output is controlled
by a highly efficient GaAlAs infrared LED.
Sensor Circuitry
Instrumentation
Multiplexers
Data Acquisition
Electronic Switching
I/O Subsystems
Meters (gas, oil, electric and water)
Medical Equipment-Patient/Equipment Isolation
Security
Aerospace
Industrial Controls
1A Load Current
0.6 Max On-Resistance
2mA Control Current
3750Vrms Input/Output Isolation
Low Drive Power Requirements (TTL/CMOS
Compatible)
No Moving Parts
High Reliability
Arc-Free With No Snubbing Circuits
No EMI/RFI Generation
Machine Insertable, Wave Solderable
Small 6-Pin Package
Tape & Reel, Surface Mount Version Available
Form-B
IF
10%
90%
ILOAD
ton
toff
1
3
2
4
5
6
+ Control
– Control
Do Not Use
Load
Do Not Use
Load
AC/DC Configuration
1
3
2
4
5
6
+ Control
– Control
Do Not Use
+ Load
– Load
DC Only Configuration
UL Recognized Component: File E76270
CSA Certified Component: Certificate 1175739
EN/IEC 60950-1 Certified Component:
TUV Certificate B 09 07 49410 004
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
2R02
LCB710
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current
AC/DC Configuration, Continuous IF=0mA IL
--1
Arms / ADC
DC Configuration, Continuous - - 2 ADC
Peak IF=0mA , t < 10ms ILPK --±5 A
P
On-Resistance 1
IF=0mA, IL=1A - 0.39 0.6 AC/DC Configuration RON
DC Configuration IF=0mA, IL=2A - 0.1 0.2
Switching Speeds
Turn-On ton - 0.63 3
IF=5mA, VL=10V ms
Turn-Off toff - 1.5 3
Off-State Leakage Current IF=2mA, VL=60V ILEAK --1 A
Output Capacitance IF=2mA, VL=50V, f=1MHz COUT - 125 - pF
Input Characteristics
Input Control Current to Activate IL=1A IF- 0.22 2 mA
Input Control Current to Deactivate - IF0.1 0.21 - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Current VR=5V IR--10 A
Common Characteristics
Capacitance, Input to Output - CI/O -3- pF
1 Measurement taken within 1 second of on-time.
Parameter Ratings Units
Blocking Voltage 60 VP
Reverse Input Voltage 5 V
Input Control Current
Peak (10ms)
50 mA
1A
Input Power Dissipation 1100 mW
Total Power Dissipation 2800 mW
Isolation Voltage, Input to Output 3750 Vrms
ESD Rating, Human Body Model 8 kV
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 1.33 mW / ºC
2 Derate linearly 6.67 mW / ºC
Absolute Maximum Ratings @ 25ºC
Electrical Characteristics @ 25ºC
INTEGRATED CIRCUITS DIVISION
LCB710
www.ixysic.com 3
R02
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
PERFORMANCE DATA* (@25ºC Unless Otherwise Noted)
LED Forward Voltage (V)
1.220 1.225 1.230 1.235 1.240 1.245 1.250
Device Count (N)
0
5
10
15
20
25
30
Typical LED Forward Voltage Drop
(N=50)
Turn-On Time (ms)
0.54 0.57 0.60 0.63 0.66 0.69 0.72
Device Count (N)
0
5
10
15
20
25
Typical Turn-On Time
(N=50, IF=5mA)
Turn-Off Time (ms)
1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9
Device Count (N)
0
5
10
15
20
Typical Turn-Off Time
(N=50, IF=5mA)
LED Current (mA)
0.20 0.21 0.22 0.23 0.24 0.25 0.26
Device Count (N)
0
5
10
15
20
25
Typical IF for Switch Operation
(N=50, IL=1A)
On -Resistance (:)
0.381 0.384 0.387 0.390 0.393 0.396 0.399
Device Count (N)
0
5
10
15
20
Typical On-Resistance Distribution
(IL=1A)
Blocking Voltage (VP)
69 71 73 75 77 79 81
Device Count (N)
0
5
10
15
20
25
Typical Blocking Voltage Distribution
(N=50, IF=2mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
LED Forward Voltage (V)
1.0
1.1
1.2
1.3
1.4
1.5
1.6
LED Forward Voltage
vs. Temperature
IF=50mA
IF=20mA
IF=10mA
IF=5mA
IF=2mA
LED Forward Current (mA)
0 1020304050
Turn-On Time (ms)
0.620
0.622
0.624
0.626
0.628
0.630
0.632
0.634
0.636
0.638
0.640
Typical Turn-On Time
vs. LED Forward Current
(IL=100mA)
LED Forward Current (mA)
0 1020304050
Turn-Off Time (ms)
0
1
2
3
4
5
6
7
8
Typical Turn-Off Time
vs. LED Forward Current
(IL=100mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
LED Current (mA)
0.12
0.16
0.20
0.24
0.28
0.32
Typical IF for Switch Operation
vs. Temperature
(IL=100mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Turn-On Time (ms)
0.4
0.5
0.6
0.7
0.8
0.9
Typical Turn-On Time
vs. Temperature
(IF=5mA, IL=100mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Turn-Off Time (ms)
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
Typical Turn-Off Time
vs. Temperature
(IF=5mA, IL=100mA)
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
4R02
LCB710
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
PERFORMANCE DATA* (@25ºC Unless Otherwise Noted)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
On-Resistance (:)
0.28
0.32
0.36
0.40
0.44
0.48
Typical On-Resistance vs. Temperature
AC/DC Configuration
(IF=0mA, IL=500mA)
Load Voltage (V)
-0.4 -0.3 -0.2 -0.1 0.0 0.1 0.2 0.3 0.4
Load Current (A)
-1.0
-0.5
0.0
0.5
1.0
Typical Load Current vs. Load Voltage
AC/DC Configuration
(IF=0mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Load Current (A)
0.5
0.6
0.7
0.8
0.9
1.0
1.1
Maximum Load Current vs. Temperature
AC/DC Configuration
(IF=0mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
On Resistance (:)
0.07
0.08
0.09
0.10
0.11
0.12
Typical On-Resistance vs. Temperature
DC-Only Configuration
(IF=0mA, IL=1A)
Load Voltage (V)
0.00 0.05 0.10 0.15 0.20 0.25
Load Current (A)
0.0
0.5
1.0
1.5
2.0
Load Current vs. Load Voltage
DC-Only Configuration
(IF=0mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Load Current (A)
1.0
1.2
1.4
1.6
1.8
2.0
2.2
Maximum Load Current vs. Temperature
DC-Only Configuration
(IF=0mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Blocking Voltage (VP)
73
74
75
76
77
78
79
80
81
Typical Blocking Voltage
vs. Temperature
(IF=2mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Leakage Current (PA)
0.00
0.02
0.04
0.06
0.08
0.10
Typical Leakage Current
vs. Temperature
(IF=2mA, VL=60V)
Load Voltage (V)
0.1 1 10 100
Output Capacitence (pF)
100
150
200
250
300
350
400
450
Output Capacitance
vs. Load Voltage
(IF=2mA, f=1MHz)
Time
10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s
Load Current (A)
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Energy Rating Curve
INTEGRATED CIRCUITS DIVISION
LCB710
www.ixysic.com 5
R02
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
LCB710 / LCB710S MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
LCB710 / LCB710S 250ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
e3
Pb
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
6R02
LCB710
Dimensions
mm
(inches)
PCB Hole Pattern
6.350 ± 0.127
(0.250 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
5.080 ± 0.127
(0.200 ± 0.005)
6 - 0.800 DIA.
(6 - 0.031 DIA.)
0.254 ± 0.0127
(0.010 ± 0.0005)
9.144 ± 0.508
(0.360 ± 0.020)
7.239 TYP
(0.285 TYP)
7.620 ± 0.254
(0.300 ± 0.010)
3.302 ± 0.051
(0.130 ± 0.002) 4.064 TYP
(0.160 TYP)
0.457 ± 0.076
(0.018 ± 0.003)
8.382 ± 0.381
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
1.651 ± 0.254
(0.065 ± 0.010)
Pin 1
Dimensions
mm
(inches)
PCB Land Pattern
0.254 ± 0.0127
(0.010 ± 0.0005)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.127
(0.025 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
4.445 ± 0.254
(0.175 ± 0.010)
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
0.65
(0.0255)
8.382 ± 0.381
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005)
9.524 ± 0.508
(0.375 ± 0.020) 6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
1.651 ± 0.254
(0.065 ± 0.010)
1.651 ± 0.254
(0.065 ± 0.010)
Pin 1
LCB710
LCB710S
Mechanical Dimensions
INTEGRATED CIRCUITS DIVISION
Specification: DS-LCB710-R02
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/22/2012
For additional information please visit our website at: www.ixysic.com
7
LCB710
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
Dimensions
mm
(inches)
Embossment
Embossed
Carrier
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=16.00
(0.63)
B0 = 10.10
(0.398)
A0 = 10.10
(0.398)
P = 12.00
(0.472)
K1 = 3.80
(0.15)
K0 = 4.90
(0.19)
User Direction of Feed
LCB710STR Tape & Reel