RECTRON SD101AW SEMICONDUCTOR TECHNICAL SPECIFICATION SMALL SIGNAL DIODE VOLTAGE RANGE 60 Volts FEATURES * Low Forward Voltage Drop * Guard Ring Construction for Transient Protection * Negligible Reverse Recovery Time SOD-123 MECHANICAL DATA Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.01 gram .110(2.80) .102(2.60) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .006(.15) .026(.65) .018(.45) .067(1.70) .059(1.50) .152(3.85) .140(3.55) .003(.08) * * * * * .049(1.25) .041(1.05) Ratings at 25 o C ambient temperature unless otherwise specified. REF .020(0.50) Single phase, half wave, 60 Hz, resistive or inductive load. .004(.10) .000(.00) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) Maximum Maximum Maximum Maximum RATINGS Repetitive Peak Reverse Voltage Working Peak reverse Voltage DC Blocking Voltage RMS Voltage Maximum Reverse Breakdown Voltage(IR=10A) Forward Continuous Current @t<1.0s @t=10s Typical Reverse Recovery Time(I F=I R=5mA,I rr =0.1X IR,R L=100) Non-Repetitive Peak Forward Surge Current Typical Junction Capacitance(V R=0V,f=1MHz) Maximum Power Dissipation Typical Thermal Resistance Operating and Storage Temperature Range SYMBOL V RRM V RWM VR VRMS SD101AW UNITS 60 Volts 42 Volts V(BR)R 60 Volts IFM 15 50 2.0 mAmps T rr 1.0 nS CT 2.0 pF PD RJA 400 mW TJ,TSTG -65 to + 125 C/W O C SD101AW UNITS IFSM ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) SYMBOL CHARACTERISTICS Maximum Instantaneous Forward Voltage @I F =1.0mA @I F =15mA Maximum Instantaneous Reverse Current @V R =50V VF IR 300 mAmps Amps O 0.41 1.00 0.2 Volts uAmps 2006-3 RATING AND CHARACTERISTICS CURVES ( SD101AW ) 10 IF, FORWARD CURRENT(A) PD,POWER DISSIPATION(mW) 500 400 300 200 100 1.0 0.1 0.01 0 0 25 50 75 100 125 150 0 0.5 O TA, AMBIENT TEMPERATURE( C) Figure1 Power Derating Curve Figure2 Typical Foward Characteristics 2 10 TA = 125OC TJ = 25OC f = 1MHz IR, REVERSE CURRENT(A) CT,TOTAL CAPACITANCE(pF) 1.0 VF, FORWARD VOLTAGE(V) 1 1 TA = 75OC 0.1 TA = 25OC 0.01 T A = 0 OC 0.001 TA = -65OC 0.0001 0 0 10 20 30 40 50 VR, REVERSE VOLTAGE(V) Figure3 Typical Total Capacitance vs Reverse Voltage 0 10 20 30 40 50 60 VR, REVERSE VOLTAGE(V) Figure4 Typical Reverse characteristics RECTRON DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. RECTRON