KBPC40, 50GS SERIES 1 of 3 © 2002 Won-Top Electronics
KBPC40, 50GS SERIES
40, 50A GLASS PASSIVATED IN-LINE BRIDGE RECTIFIER
Features
! Glass Passivated Die Construction
! Low Forward Voltage Drop
! High Current Capability A
! High Reliability
! High Surge Current Capability
! Ideal for Printed Circuit Boards
! Designed for Saving Mounting Space
- ~ ~ +
Mechanical Data C
! Case: Epoxy Case with Heat Sink Internally D
Mounted in the Bri dge Encapsul ation
! Ter minals: Plated Leads Solderable per E E
MIL-STD- 202, Met hod 208
! Polarity: As Marked on Body META L HEATSI NK
! Weight: 30 grams (approx.) G B
! Mounting Position: Any
! Marking: Type Number
H
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derat e current by 20%.
Characteristics Symbol -00GS -01GS -02GS -04GS -06GS -08GS -10GS Unit
Peak Repetit i ve Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current
@TC = 55°C KBPC40
KBPC50 IO40
50 A
Non-Repetiti ve P eak Forward Surge Current,
8.3ms Si ngl e Half-si ne-wave Superimposed
on Rated Load (JEDEC Method)
KBPC40
KBPC50 IFSM 400
400 A
Forward Voltage Drop
(per element) KBPC40 @IF = 20A
KBPC50 @IF = 25A VFM 1.1 V
Peak Reverse Current at @T
C = 25°C
Rated DC Blocking Voltage (per element) @TC = 125°C IR5.0
500 µA
Typical Thermal Resistance (per element) (Not e 1) RJC 1.5 K/W
RMS Isolation Voltage from Case to Lead VISO 2500 V
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
Note: 1. Thermal resistance junct i on to case per element mounted on 220 x 220 x 50mm thick AL plate.
WTE
PO WER SEM ICO NDUC TOR S
KBPC-S
Dim Min Max
A28.40 28.70
B10.97 11.23
C13.90 —
D19.10 —
E5.10 —
G1.20 Ø Typical
H3.05 3.60
All Dimensions in mm