09/2008
159
Ø d ±0.05 p 15 22.5 p 27.5 p = 37.5
0.6 or 0.8* 0.8 1.0
*See size table.
All dimensions are in mm.
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm - 2 sections.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame retardant according to
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive ammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to +110°C
Related documents: IEC 60384-14; EN 60384-14.
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 440Vac / 1000Vdc; 50/60Hz
Capacitance range: 4700pF to 2.2µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M).
Tolerance ±5% (J) available
upon request.
Dissipation factor (DF):
tgδ x 10-4 at +25°C ±5°C: 10 (6)* at 1kHz *
Typical value
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100 Vdc
Performance
1x105 M for C0.33µF
30000 s for C>0.33µF
Test voltage between terminations (on all pieces):
1700Vac for 1 s + 2700Vdc for 1 s at +25°C±5°C
R.47
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: interference suppression and
«across-the-line» applications. Suitable for use in situations
where failure of the capacitor would not lead to danger of
electric shock.
PRODUCT CODE: R47
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions 1st
Temperature: +40°C ± 2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Test conditions 2nd
Temperature: +60°C ± 2°C
Relative humidity (RH): 95% ±2%
Test duration: 500 hours
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 5%
Insulation resistance: 50% of initial limit.
Endurance:
Test conditions
Temperature: +110°C ± 2°C
Test duration: 1000 h
Voltage applied: 1.25 x VR +1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 10%
Insulation resistance: 50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Performance
Capacitance change |C/C|: 2%
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
10.0 All B +0.2 H +0.1 L +0.2
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
22.5 All B +0.2 H +0.1 L +0.3
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3
single sided metallized
polypropylene lm
2 sections
Winding scheme
Loose Taped
Fig.1 Fig.2
09/2008 160
R.47
X2 CLASS (IEC60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
PRODUCT CODE: R47
APPROVALS
Approved according to IEC 60384-14
According to IEC 60065.
(*) ENEC mark has replaced all the following European
National marks:
Rated Cap. 440 Vac / 1000 Vdc
Std dimensions
Ø d Max
dv/dt at
420Vdc
Part Number
B H L p (V/ µs)
4700 pF 4.0 9.0 13.0 10.0 0.6 750 R474F 1470 - - 01 -
6800 pF 5.0 11.0 13.0 10.0 0.6 750 R474F 1680 - - 01 -
8200 pF 6.0 12.0 13.0 10.0 0.6 750 R474F 1820 - - 01 -
0.010 µF 6.0 12.0 13.0 10.0 0.6 750 R474F 2100 - - 01 -
0.010 µF 5.0 11.0 18.0 15.0 0.6 600 R474I 2100 - - 01 -
0.012 µF 5.0 11.0 18.0 15.0 0.6 600 R474I 2120 - - 01 -
0.015 µF 5.0 11.0 18.0 15.0 0.6 600 R474I 2150 - - 01 -
0.018 µF 5.0 11.0 18.0 15.0 0.6 600 R474I 2180 - - 01 -
0.022 µF 6.0 12.0 18.0 15.0 0.6 600 R474I 2220 - - 01 -
0.027 µF 6.0 12.0 18.0 15.0 0.6 600 R474I 2270 - - 01 -
0.033 µF 6.0 12.0 18.0 15.0 0.6 600 R474I 2330 - - 01 -
0.039 µF 7.5 13.5 18.0 15.0 0.6 600 R474I 2390 - - 01 -
0.047 µF 7.5 13.5 18.0 15.0 0.6 600 R474I 2470 - - 01 -
0.047 µF 6.0 17.5 18.0 15.0 0.6 600 R474I 2470 - - 02 -
0.047 µF 9.0 12.5 18.0 15.0 0.6 600 R474I 2470 - - 03 -
0.056 µF 8.5 14.5 18.0 15.0 0.6 600 R474I 2560 - - 01 -
0.068 µF 10.0 16.0 18.0 15.0 0.8 600 R474I 2680 - - 01 -
0.068 µF 7.5 18.5 18.0 15.0 0.8 600 R474I 2680 - - 02 -
0.068 µF 13.0 12.0 18.0 15.0 0.8 600 R474I 2680 - - 03 -
0.082 µF 10.0 16.0 18.0 15.0 0.8 600 R474I 2820 - - 01 -
0.10 µF 11.0 19.0 18.0 15.0 0.8 600 R474I 3100 - - 01 -
0.047 µF 6.0 15.0 26.5 22.5 0.8 300 R474N 2470 - - 01 -
0.047 µF 6.5 13.5 26.5 22.5 0.8 300 R474N 2470 - - 02 -
0.068 µF 6.0 15.0 26.5 22.5 0.8 300 R474N 2680 - - 01 -
0.10 µF 7.0 16.0 26.5 22.5 0.8 300 R474N 3100 - - 01 -
0.12 µF 8.5 17.0 26.5 22.5 0.8 300 R474N 3120 - - 01 -
0.15 µF 10.0 18.5 26.5 22.5 0.8 300 R474N 3150 - - 01 -
0.18 µF 10.0 18.5 26.5 22.5 0.8 300 R474N 3180 - - 01 -
0.22 µF 11.0 20.0 26.5 22.5 0.8 300 R474N 3220 - - 01 -
0.27 µF 13.0 22.0 26.5 22.5 0.8 300 R474N 3270 - - 01 -
0.33 µF 13.0 22.0 26.5 22.5 0.8 300 R474N 3330 - - 01 -
0.15 µF 9.0 17.0 32.0 27.5 0.8 225 R474R 3150 - - 01 -
0.18 µF 9.0 17.0 32.0 27.5 0.8 225 R474R 3180 - - 01 -
0.22 µF 9.0 17.0 32.0 27.5 0.8 225 R474R 3220 - - 01 -
0.27 µF 9.0 17.0 32.0 27.5 0.8 225 R474R 3270 - - 02 -
0.33 µF 11.0 20.0 32.0 27.5 0.8 225 R474R 3330 - - 02 -
0.39 µF 11.0 20.0 32.0 27.5 0.8 225 R474R 3390 - - 01 -
0.47 µF 13.0 22.0 32.0 27.5 0.8 225 R474R 3470 - - 01 -
0.56 µF 13.0 22.0 32.0 27.5 0.8 225 R474R 3560 - - 01 -
0.68 µF 14.0 28.0 32.0 27.5 0.8 225 R474R 3680 - - 01 -
0.82 µF 18.0 33.0 32.0 27.5 0.8 225 R474R 3820 - - 01 -
1.0 µF 18.0 33.0 32.0 27.5 0.8 225 R474R 4100 - - 01 -
1.2 µF 18.0 33.0 32.0 27.5 0.8 225 R474R 4120 - - 01 -
1.5 µF 22.0 37.0 32.0 27.5 0.8 225 R474R 4150 - - 01 -
0.47 µF 11.0 22.0 41.5 37.5 1.0 150 R474W 3470 - - 01 -
0.56 µF 11.0 22.0 41.5 37.5 1.0 150 R474W 3560 - - 01 -
0.68 µF 13.0 24.0 41.5 37.5 1.0 150 R474W 3680 - - 01 -
0.82 µF 16.0 28.5 41.5 37.5 1.0 150 R474W 3820 - - 01 -
1.0 µF 16.0 28.5 41.5 37.5 1.0 150 R474W 4100 - - 01 -
1.2 µF 19.0 32.0 41.5 37.5 1.0 150 R474W 4120 - - 01 -
1.5 µF 19.0 32.0 41.5 37.5 1.0 150 R474W 4150 - - 01 -
1.8 µF 20.0 40.0 41.5 37.5 1.0 150 R474W 4180 - - 01 -
2.2 µF 20.0 40.0 41.5 37.5 1.0 150 R474W 4220 - - 01 -
All dimensions are in mm
(*)
ENEC
IEC 60384-14 Class X2 File No.
CA08.00101
UL 1414
up to 1µF, 85°C;
250Vac)
Across-the-line File No. E97797
UL 1283 Electromagnetic
Interference
Filters
File No. E85238
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
AMMO-PACK
AMMO-PACK
12.70
19.05
1
2
10.0/15.0
22.5
DQ
DQ
REEL Ø500mm
REEL Ø500mm
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
Loose, short leads
Loose, long leads
Loose, long leads
04 +2
25 -1/+2
30 +5
00
50
40
Note: Ammo-pack is the preferred packaging for taped version.
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
09/2008
161
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm - 2 sections.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame retardant according to
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive ammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to +110°C
Related documents: IEC 60384-14; EN60384-14
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 440Vac / 1000Vdc; 50/60Hz
Capacitance range: 4700pF to 2.2µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M);
Tolerance ±5% (J) available
upon request.
Dissipation factor (DF):
tgδ x 10-4 at +25°C ±5°C: 10 (6)* at 1kHz *
Typical value
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100 Vdc
Performance
1x105 M for C0.33µF
30000 s for C>0.33µF
Test voltage between terminations (on all pieces):
1700Vac for 1 s + 2700Vdc for 1 s at +25°C±5°C
R.47
X1 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: interference suppression and «across-
the-line» applications. Suitable for use in situations where
failure of the capacitor would not lead to danger of electric
shock.
Class X1 shall be applied for PERMANENTLY CONNECTED
APPARATUS.
Note: PERMANENTLY CONNECTED APPARATUS:
apparatus which is intended for connection to the mains
by a connection which cannot be loosened BY HAND.
BY HAND:
operation that does not require the use of any object
such a tool, coin, etc.
PRODUCT CODE: R47
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
10.0 All B +0.2 H +0.1 L +0.2
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
22.5 All B +0.2 H +0.1 L +0.3
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions 1st
Temperature: +40°C ± 2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Test conditions 2nd
Temperature: +60°C ± 2°C
Relative humidity (RH): 95% ±2%
Test duration: 500 hours
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 5%
Insulation resistance: 50% of initial limit.
Endurance:
Test conditions
Temperature: +110°C ± 2°C
Test duration: 1000 h
Voltage applied: 1.25 x VR +1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 10%
Insulation resistance: 50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Performance
Capacitance change |C/C|: 2%
Ø d ±0.05 p 15 22.5 p 27.5 p = 37.5
0.6 or 0.8* 0.8 1.0
*See size table.
All dimensions are in mm.
Loose Taped
Fig.1 Fig.2
09/2008 162
Rated Cap. 440 Vac / 1000 Vdc
Std dimensions
Ø d Max
dv/dt at
420Vdc
Part Number
B H L p (V/ µs)
4700 pF 4.0 9.0 13.0 10.0 0.6 750 R474F 1470 - - A1 -
6800 pF 5.0 11.0 13.0 10.0 0.6 750 R474F 1680 - - A1 -
8200 pF 6.0 12.0 13.0 10.0 0.6 750 R474F 1820 - - A1 -
0.010 µF 6.0 12.0 13.0 10.0 0.6 750 R474F 2100 - - A1 -
0.010 µF 5.0 11.0 18.0 15.0 0.6 600 R474I 2100 - - A1 -
0.012 µF 5.0 11.0 18.0 15.0 0.6 600 R474I 2120 - - A1 -
0.015 µF 5.0 11.0 18.0 15.0 0.6 600 R474I 2150 - - A1 -
0.018 µF 5.0 11.0 18.0 15.0 0.6 600 R474I 2180 - - A1 -
0.022 µF 6.0 12.0 18.0 15.0 0.6 600 R474I 2220 - - A1 -
0.027 µF 6.0 12.0 18.0 15.0 0.6 600 R474I 2270 - - A1 -
0.033 µF 6.0 12.0 18.0 15.0 0.6 600 R474I 2330 - - A1 -
0.039 µF 7.5 13.5 18.0 15.0 0.6 600 R474I 2390 - - A1 -
0.047 µF 7.5 13.5 18.0 15.0 0.6 600 R474I 2470 - - A1 -
0.047 µF 6.0 17.5 18.0 15.0 0.6 600 R474I 2470 - - A2 -
0.047 µF 9.0 12.5 18.0 15.0 0.6 600 R474I 2470 - - A3 -
0.056 µF 8.5 14.5 18.0 15.0 0.6 600 R474I 2560 - - A1 -
0.068 µF 10.0 16.0 18.0 15.0 0.8 600 R474I 2680 - - A1 -
0.068 µF 7.5 18.5 18.0 15.0 0.8 600 R474I 2680 - - A2 -
0.068 µF 13.0 12.0 18.0 15.0 0.8 600 R474I 2680 - - A3 -
0.082 µF 10.0 16.0 18.0 15.0 0.8 600 R474I 2820 - - A1 -
0.10 µF 11.0 19.0 18.0 15.0 0.8 600 R474I 3100 - - A1 -
0.047 µF 6.0 15.0 26.5 22.5 0.8 300 R474N 2470 - - A1 -
0.047 µF 6.5 13.5 26.5 22.5 0.8 300 R474N 2470 - - A2 -
0.068 µF 6.0 15.0 26.5 22.5 0.8 300 R474N 2680 - - A1 -
0.10 µF 7.0 16.0 26.5 22.5 0.8 300 R474N 3100 - - A1 -
0.12 µF 8.5 17.0 26.5 22.5 0.8 300 R474N 3120 - - A1 -
0.15 µF 10.0 18.5 26.5 22.5 0.8 300 R474N 3150 - - A1 -
0.18 µF 10.0 18.5 26.5 22.5 0.8 300 R474N 3180 - - A1 -
0.22 µF 11.0 20.0 26.5 22.5 0.8 300 R474N 3220 - - A1 -
0.27 µF 13.0 22.0 26.5 22.5 0.8 300 R474N 3270 - - A1 -
0.33 µF 13.0 22.0 26.5 22.5 0.8 300 R474N 3330 - - A1 -
0.15 µF 9.0 17.0 32.0 27.5 0.8 225 R474R 3150 - - A1 -
0.18 µF 9.0 17.0 32.0 27.5 0.8 225 R474R 3180 - - A1 -
0.22 µF 9.0 17.0 32.0 27.5 0.8 225 R474R 3220 - - A1 -
0.27 µF 9.0 17.0 32.0 27.5 0.8 225 R474R 3270 - - A2 -
0.33 µF 11.0 20.0 32.0 27.5 0.8 225 R474R 3330 - - A2 -
0.39 µF 11.0 20.0 32.0 27.5 0.8 225 R474R 3390 - - A1 -
0.47 µF 13.0 22.0 32.0 27.5 0.8 225 R474R 3470 - - A1 -
0.56 µF 13.0 22.0 32.0 27.5 0.8 225 R474R 3560 - - A1 -
0.68 µF 14.0 28.0 32.0 27.5 0.8 225 R474R 3680 - - A1 -
0.82 µF 18.0 33.0 32.0 27.5 0.8 225 R474R 3820 - - A1 -
1.0 µF 18.0 33.0 32.0 27.5 0.8 225 R474R 4100 - - A1 -
1.2 µF 18.0 33.0 32.0 27.5 0.8 225 R474R 4120 - - A1 -
1.5 µF 22.0 37.0 32.0 27.5 0.8 225 R474R 4150 - - A1 -
0.47 µF 11.0 22.0 41.5 37.5 1.0 150 R474W 3470 - - A1 -
0.56 µF 11.0 22.0 41.5 37.5 1.0 150 R474W 3560 - - A1 -
0.68 µF 13.0 24.0 41.5 37.5 1.0 150 R474W 3680 - - A1 -
0.82 µF 16.0 28.5 41.5 37.5 1.0 150 R474W 3820 - - A1 -
1.0 µF 16.0 28.5 41.5 37.5 1.0 150 R474W 4100 - - A1 -
1.2 µF 19.0 32.0 41.5 37.5 1.0 150 R474W 4120 - - A1 -
1.5 µF 19.0 32.0 41.5 37.5 1.0 150 R474W 4150 - - A1 -
1.8 µF 20.0 40.0 41.5 37.5 1.0 150 R474W 4180 - - A1 -
2.2 µF 20.0 40.0 41.5 37.5 1.0 150 R474W 4220 - - A1 -
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
All dimensions are in mm
R.47
X1 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
PRODUCT CODE: R47
APPROVALS
(*)
ENEC
IEC 60384-14 Class X1 File No.
CA08.00101
UL 1414
up to 1µF, 85°C;
250Vac)
Across-the-line File No. E97797
UL 1283 Electromagnetic
Interference
Filters
File No. E85238
Approved according to IEC 60384-14
According to IEC 60065.
(*) ENEC mark has replaced all the following European
National marks:
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
AMMO-PACK
AMMO-PACK
12.70
19.05
1
2
10.0/15.0
22.5
DQ
DQ
REEL Ø500mm
REEL Ø500mm
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
Loose, short leads
Loose, long leads
Loose, long leads
04 +2
25 -1/+2
30 +5
00
50
40
Note: Ammo-pack is the preferred packaging for taped version.
single sided metallized
polypropylene lm
2 sections
Winding scheme
09/2008
163
Ø d ±0.05 p 15 22.5 p 27.5 p = 37.5
0.6 or 0.8* 0.8 1.0
*See size table.
All dimensions are in mm.
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm - 2 sections.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame retardant according to
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive ammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category: 40/85/56 IEC 60068-1
Operating temperature range: -40 to +85°C
Related documents: IEC 60384-14; EN 60384-14.
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 520Vac / 1000Vdc; 50/60Hz
Capacitance range: 4700pF to 2.2µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M);
Tolerance ±5% (J) available
upon request.
Dissipation factor (DF):
tgδ x 10-4 at +25°C ±5°C: 10 (6)* at 1kHz *
Typical value
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100 Vdc
Performance
1x105 M for C0.33µF
30000 s for C>0.33µF
Test voltage between terminations (on all pieces):
1700Vac for 1 s + 2700Vdc for 1 s at +25°C±5°C
R.47
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: interference suppression and
«across-the-line» applications. Suitable for use in situations
where failure of the capacitor would not lead to danger of
electric shock.
V = 520Vac
PRODUCT CODE: R475
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
10.0 All B +0.2 H +0.1 L +0.2
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
22.5 All B +0.2 H +0.1 L +0.3
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions 1st
Temperature: +40°C ± 2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Test conditions 2nd
Temperature: +60°C ± 2°C
Relative humidity (RH): 95% ±2%
Test duration: 500 hours
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 5%
Insulation resistance: 50% of initial limit.
Endurance:
Test conditions
Temperature: +85°C ± 2°C
Test duration: 1000 h
Voltage applied: 1.25 x VR +1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 10%
Insulation resistance: 50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Performance
Capacitance change |C/C|: 2%
single sided metallized
polypropylene lm
2 sections
Winding scheme
Loose Taped
Fig.1 Fig.2
09/2008 164
R.47
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
PRODUCT CODE: R475
APPROVALS
(*)
ENEC
IEC 60384-14 Class X2
File No.
CA08.00101
UL 1414
up to 1µF, 85°C;
250Vac)
Across-the-line File No. E97797
UL 1283
(440 Vac 110°C)
Electromagnetic
Interference
Filters
File No. E85238
Approved according to IEC 60384-14
According to IEC 60065.
(*) ENEC mark has replaced all the following European
National marks:
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
AMMO-PACK
AMMO-PACK
12.70
19.05
1
2
10.0/15.0
22.5
DQ
DQ
REEL Ø500mm
REEL Ø500mm
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
Loose, short leads
Loose, long leads
Loose, long leads
04 +2
25 -1/+2
30 +5
00
50
40
Note: Ammo-pack is the preferred packaging for taped version.
All dimensions are in mm
Rated Cap. 520 Vac / 1000 Vdc
Std dimensions
Ø d Max
dv/dt at
420Vdc
Part Number
B H L p (V/ µs)
4700 pF 4.0 9.0 13.0 10.0 0.6 750 R475F 1470 - - 01 -
6800 pF 5.0 11.0 13.0 10.0 0.6 750 R475F 1680 - - 01 -
8200 pF 6.0 12.0 13.0 10.0 0.6 750 R475F 1820 - - 01 -
0.010 µF 6.0 12.0 13.0 10.0 0.6 750 R475F 2100 - - 01 -
0.010 µF 5.0 11.0 18.0 15.0 0.6 600 R475I 2100 - - 01 -
0.012 µF 5.0 11.0 18.0 15.0 0.6 600 R475I 2120 - - 01 -
0.015 µF 5.0 11.0 18.0 15.0 0.6 600 R475I 2150 - - 01 -
0.018 µF 5.0 11.0 18.0 15.0 0.6 600 R475I 2180 - - 01 -
0.022 µF 6.0 12.0 18.0 15.0 0.6 600 R475I 2220 - - 01 -
0.027 µF 6.0 12.0 18.0 15.0 0.6 600 R475I 2270 - - 01 -
0.033 µF 6.0 12.0 18.0 15.0 0.6 600 R475I 2330 - - 01 -
0.039 µF 7.5 13.5 18.0 15.0 0.6 600 R475I 2390 - - 01 -
0.047 µF 7.5 13.5 18.0 15.0 0.6 600 R475I 2470 - - 01 -
0.047 µF 6.0 17.5 18.0 15.0 0.6 600 R475I 2470 - - 02 -
0.047 µF 9.0 12.5 18.0 15.0 0.6 600 R475I 2470 - - 03 -
0.056 µF 8.5 14.5 18.0 15.0 0.6 600 R475I 2560 - - 01 -
0.068 µF 10.0 16.0 18.0 15.0 0.8 600 R475I 2680 - - 01 -
0.068 µF 7.5 18.5 18.0 15.0 0.8 600 R475I 2680 - - 02 -
0.068 µF 13.0 12.0 18.0 15.0 0.8 600 R475I 2680 - - 03 -
0.082 µF 10.0 16.0 18.0 15.0 0.8 600 R475I 2820 - - 01 -
0.10 µF 11.0 19.0 18.0 15.0 0.8 600 R475I 3100 - - 01 -
0.047 µF 6.0 15.0 26.5 22.5 0.8 300 R475N 2470 - - 01 -
0.047 µF 6.5 13.5 26.5 22.5 0.8 300 R475N 2470 - - 02 -
0.068 µF 6.0 15.0 26.5 22.5 0.8 300 R475N 2680 - - 01 -
0.10 µF 7.0 16.0 26.5 22.5 0.8 300 R475N 3100 - - 01 -
0.12 µF 8.5 17.0 26.5 22.5 0.8 300 R475N 3120 - - 01 -
0.15 µF 10.0 18.5 26.5 22.5 0.8 300 R475N 3150 - - 01 -
0.18 µF 10.0 18.5 26.5 22.5 0.8 300 R475N 3180 - - 01 -
0.22 µF 11.0 20.0 26.5 22.5 0.8 300 R475N 3220 - - 01 -
0.27 µF 13.0 22.0 26.5 22.5 0.8 300 R475N 3270 - - 01 -
0.33 µF 13.0 22.0 26.5 22.5 0.8 300 R475N 3330 - - 01 -
0.15 µF 9.0 17.0 32.0 27.5 0.8 225 R475R 3150 - - 01 -
0.18 µF 9.0 17.0 32.0 27.5 0.8 225 R475R 3180 - - 01 -
0.22 µF 9.0 17.0 32.0 27.5 0.8 225 R475R 3220 - - 01 -
0.27 µF 9.0 17.0 32.0 27.5 0.8 225 R475R 3270 - - 02 -
0.33 µF 11.0 20.0 32.0 27.5 0.8 225 R475R 3330 - - 02 -
0.39 µF 11.0 20.0 32.0 27.5 0.8 225 R475R 3390 - - 01 -
0.47 µF 13.0 22.0 32.0 27.5 0.8 225 R475R 3470 - - 01 -
0.56 µF 13.0 22.0 32.0 27.5 0.8 225 R475R 3560 - - 01 -
0.68 µF 14.0 28.0 32.0 27.5 0.8 225 R475R 3680 - - 01 -
0.82 µF 18.0 33.0 32.0 27.5 0.8 225 R475R 3820 - - 01 -
1.0 µF 18.0 33.0 32.0 27.5 0.8 225 R475R 4100 - - 01 -
1.2 µF 18.0 33.0 32.0 27.5 0.8 225 R475R 4120 - - 01 -
1.5 µF 22.0 37.0 32.0 27.5 0.8 225 R475R 4150 - - 01 -
0.47 µF 11.0 22.0 41.5 37.5 1.0 150 R475W 3470 - - 01 -
0.56 µF 11.0 22.0 41.5 37.5 1.0 150 R475W 3560 - - 01 -
0.68 µF 13.0 24.0 41.5 37.5 1.0 150 R475W 3680 - - 01 -
0.82 µF 16.0 28.5 41.5 37.5 1.0 150 R475W 3820 - - 01 -
1.0 µF 16.0 28.5 41.5 37.5 1.0 150 R475W 4100 - - 01 -
1.2 µF 19.0 32.0 41.5 37.5 1.0 150 R475W 4120 - - 01 -
1.5 µF 19.0 32.0 41.5 37.5 1.0 150 R475W 4150 - - 01 -
1.8 µF 20.0 40.0 41.5 37.5 1.0 150 R475W 4180 - - 01 -
2.2 µF 20.0 40.0 41.5 37.5 1.0 150 R475W 4220 - - 01 -
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)