C322C104Z5U5TA - Kemet - Datasheet.Directory

MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED

KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

KEMET

Multilayer ceramic capacitors are available in a

variety of physical sizes and configurations, including

leaded devices and surface mounted chips. Leaded

styles include molded and conformally coated parts

with axial and radial leads. However, the basic

capacitor element is similar for all styles. It is called a

chip and consists of formulated dielectric materials

which have been cast into thin layers, interspersed

with metal electrodes alternately exposed on opposite

edges of the laminated structure.

The entire structur e is

fired at high temperature to produce a monolithic

block

which provides high capacitance values in a

small physical volume. After firing, conductive

terminations are applied to opposite ends of the chip to

make contact with the exposed electrodes.

Termination materials and methods vary depending on

the intended use.

TEMPERATURE CHARACTERISTICS

Ceramic dielectric materials can be formulated with

a wide range of characteristics. The EIA standard for

ceramic dielectric capacitors (RS-198) divides ceramic

dielectrics into the following classes:

Class I: Temperature compensating capacitors,

suitable for resonant circuit application or other appli-

cations where high Q and stability of capacitance char-

acteristics are required. Class I capacitors have

predictable temperature coefficients and are not

affected by voltage, frequency or time. They are made

from materials which are not ferro-electric, yielding

superior stability but low volumetric efficiency. Class I

capacitors are the most stable type available, but have

the lowest volumetric efficiency.

Class II: Stable capacitors, suitable for bypass

or coupling applications or frequency discriminating

circuits where Q and stability of capacitance char-

acteristics are not of a major importance. Class II

capacitors have temperature characteristics of ± 15%

or less. They are made from materials which are

ferro-electric, yielding higher volumetric efficiency but

less stability. Class II capacitors are affected by

temperature, voltage, frequency and time.

Class III: General purpose capacitors, suitable

for by-pass coupling or other applications in which

dielectric losses, high insulation resistance and

stability of capacitance characteristics are of little or

no importance. Class III capacitors are similar to Class

II capacitors except for temperature characteristics,

which are greater than ± 15%. Class III capacitors

have the highest vol

umetric efficiency and poorest

stability of any type.

KEMET leaded ceramic capacitors are offered in

the three most popular temperature characteristics:

C0G: Class I, with a temperature coefficient of 0 ±

30 ppm per degree C over an operating

temperature range of - 55°C to + 125°C (Also

known as “NP0”).

X7R: Class II, with a maximum capacitance

change of ± 15% over an operating temperature

range of - 55°C to + 125°C.

Z5U: Class III, with a maximum capacitance

change of + 22% - 56% over an operating tem-

perature range of + 10°C to + 85°C.

Specified electrical limits for these three temperature

characteristics are shown in Table 1.

SPECIFIED ELECTRICAL LIMITS

TEMPERATURE CHARACTERISTICS

PARAMETER C0G X7R Z5U

Dissipation Factor: Measured at following conditions:

C0G — 1 kHz and 1 vrms if capacitance > 1000 pF

1 MHz and 1 vrms if capacitance ≤1000 pF 0.15% 2.5% 4.0%

X7R — 1 kHz and 1 vrms*

Z5U — 1 kHz and 0.5 vrms

Dielectric Strength: 2.5 times rated DC voltage. Pass Subsequent IR Test

Insulation Resistance (IR): At rated DC voltage, 1,000 MΩ-µF 1,000 MΩ-µF 1,000 MΩ-µF

whichever of the two is smaller or 100 GΩor 100 GΩor 10 GΩ

Temperature Characteristics: Range, °C -55 to 125 -55 to 125 +10 to 85

Capacitance Change without 0 ± 30 ppm/°C ±15% +22%, -56%

DC voltage

* 1 MHz and 1 vrms if capacitance ≤100 pF on military product. Table I

KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

KEMET

CERAMIC CONFORMALLY COATED/AXIAL & RADIAL

PERFORMANCE CHARACTERISTICS

GENERAL SPECIFICATIONS

Working Voltage: Axial Radial

C0G 50 & 100 volts 100 & 200 volts

X7R 50 & 100 volts 50, 100 & 200 volts

Z5U 50 & 100 volts 50 & 100 volts

Temperature Characteristics:

C0G 0 ± 30 PPM/°C from - 55°C to + 125°C(1)

X7R ± 15% from - 55°C to + 125°C

Z5U + 22%; - 56% from + 10°C to + 85°C

Capacitance Tolerance:

C0G ± 5%, ± 10%, ± 20%

X7R ± 10%, ± 20%

Z5U ± 20%, - 20 + 80%, - 0 + 100%

Construction:

Epoxy encapsulated - meets flame test require-

ments of UL Standard 94V-0.

High-temperature solder - meets EIA RS-198D,

Method 302, Condition B (260°C for 10 sec.)

Lead Material:

Solder Coated Copper Clad Steel

Solderability:

EIA RS-198D, Method 302, Solder temperature -

230° ± 5°C. Dwell time in solder - 7 ± 1/2 seconds.

Terminal Strength:

EIA RS-198D, Method 303, Condition A (2.2 kg)

ELECTRICAL @ 25°C

Capacitance:

Within specified tolerance at 25°C and following

test conditions.

C0G - Greater than 1000 pF with 1.0 vrms at 1 kHz.

- 1000 pF and less with 1.0 vrms at 1 MHz.

X7R - with 1.0 vrms at 1 kHz.

Z5U - with 0.5 vrms at 1 kHz.

Dissipation Factor:

At 25°C - same test conditions as capacitance.

C0G - 0.15% maximum

X7R - 2.5% maximum

Z5U - 4.0% maximum

Insulation Resistance:

EIA RS-198D, Method 104, Condition A

C0G - 100 gigohms or 1000 megohm x µF,

whichever is less.

X7R -100 gigohms or 1000 megohm x µF,

whichever is less.

Z5U - 10 gigohms or 1000 megohm x µF,

whichever is less.

Dielectric Withstanding Voltage:

EIA RS-198D, Method 103 (250% of rated voltage

for 5 seconds, with current limited to 50mA)

ENVIRONMENTAL

Vibration:

EIA RS-198D, Method 304, Condition D (10-2000

Hz; 20g)

Shock:

EIA RS-198D, Method 305, Condition I (100g)

Life Test:

EIA RS-198D, Method 201, Condition D. Test

Potential and Temperature.

C0G- 200% of rated voltage at + 125°C

X7R - 200% of rated voltage at + 125°C

Z5U - 200% of rated voltage at + 85°C

Post-Test Limits at + 25°C are:

Capacitance Change:

C0G - ± 3%, or 0.25 pF, whichever is greater.

X7R - ± 20% of initial value. (2)

Z5U - ± 30% of initial value. (2)

Dissipation Factor:

C0G - 0.25% maximum

X7R - 3.0% maximum

Z5U - 4.0% maximum

Insulation Resistance:

C0G- 10 gigohms or 100 megohm x µF,

whichever is less.

X7R - 10 gigohms or 100 megohm x µF,

whichever is less.

Z5U - 1 gigohm or 100 megohm x µF,

whichever is less.

Moisture Resistance:

EIA RS-198D, Method 204, Condition A (10 cycles

without applied voltage.

Post-Test Limits at + 25°C are:

Capacitance Change:

C0G - 3%, or 0.25 pF, whichever is greater.

X7R - ± 20% of initial value. (2)

Z5U - ± 30% of initial value. (2)

Dissipation Factor:

C0G - 0.25% maximum

X7R - 3.0% maximum

Z5U - 4.0% maximum

Insulation Resistance:

C0G- 10 gigohms or 100 megohm x µF,

whichever is less.

X7R - 10 gigohms or 100 megohm x µF,

whichever is less.

Z5U - 1 gigohm or 100 megohm x µF,

whichever is less.

Thermal Shock:

EIA RS-198D, Method 202, Condition B (C0G &

X7R: - 55°C to + 125°C; Z5U: - 55°C to + 85°C)

(1) +53 ppm -30 ppm/°C from + 25°C to - 55°C, ± 60

ppm below 10 pF.

(2) X7R & Z5U dielectrics exhibit aging characteristics;

therefore, it is highly recommended that capacitors

be deaged for 2 hours at 150°C and stabilized at

room temperature for 48 hours before capacitance

measurements are made.

Conformally Coated

Axial/Radial

CERAMIC CONFORMALLY COATED/AXIAL

“AXIMAX”

KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

KEMET

CAPACITANCE OUTLINE DRAWING

MAXIMUM DIMENSIONS—INCHES & (MILLIMETERS)

ORDERING INFORMATION

MARKING INFORMATION

STYLE L D LL

MAX MAX MIN

C410 .170 (4.32) .100 (2.54) .020 (.51) 1.0 (25.4)

C412 .170 (4.32) .120 (3.05) .020 (.51) 1.0 (25.4)

C420 .260 (6.60) .100 (2.54) .020 (.51) 1.0 (25.4)

C430 .290 (7.37) .150 (3.81) .020 (.51) 1.0 (25.4)

C440 .400 (10.16) .150 (3.81) .020 (.51) 1.0 (25.4)

+.001, -.003

(+.025, -.076)

104

410 C

CERAMIC

CASE SIZE

(See Table of Dimensions above)

SPECIFICATION

C — Standard

CAPACITANCE

Expressed in Picofarad Code (pF)

First Two Digits — Significant Figures

Third Digit — Number of Zeros

FAILURE RATE

INTERNAL CONSTRUCTION

CAPACITANCE TOLERANCE

J— ±5%

K— ±10%

M— ±20%

Z — –20 +80%

A — Not Applicable

LEAD MATERIAL

C — Standard

5 — Standard

DIELECTRIC

EIA Designation

G — C0G (NPO) — Ultra-Stab le

R — X7R — Stable

U — Z5U — General Purpose

RATED VOLTAGE

1 — 100 Volts

5 — 50 Volts

*Part Number Example: C410C104M5U5CA (14 digits – no spaces)

LL L

K5R

104K

0237

Manufacturer

(KEMET)

Rated Voltage

5 - 50 volts

1 - 100 volts Dielectric

G – C0G/NP0

R – X7R

U – Z5U

Capacitance

Tolerance

Capacitance

Code

Lot

Code Date

Code

CAPACITANCE

KEMET

pF PART NUMBER

100 VOLT - Z5U

10,000 C410C103(1)1U5CA

12,000 C410C123(1)1U5CA

15,000 C410C153(1)1U5CA

18,000 C410C183(1)1U5CA

22,000 C410C223(1)1U5CA

27,000 C420C273(1)1U5CA

33,000 C420C333(1)1U5CA

39,000 C420C393(1)1U5CA

47,000 C420C473(1)1U5CA

56,000 C430C563(1)1U5CA

68,000 C430C683(1)1U5CA

82,000 C430C823(1)1U5CA

100,000 C430C104(1)1U5CA

120,000 C430C124(1)1U5CA

150,000 C430C154(1)1U5CA

180,000 C440C184(1)1U5CA

220,000 C440C224(1)1U5CA

50 VOLT - Z5U

27,000 C410C273(1)5U5CA

33,000 C410C333(1)5U5CA

39,000 C410C393(1)5U5CA

47,000 C410C473(1)5U5CA

56,000 C410C563(1)5U5CA

68,000 C410C683(1)5U5CA

82,000 C410C823(1)5U5CA

100,000 C410C104(1)5U5CA

120,000 C410C124(1)5U5CA

150,000 C410C154(1)5U5CA

180,000 C410C184(1)5U5CA

220,000 C410C224(1)5U5CA

270,000 C412C274(1)5U5CA

330,000 C412C334(1)5U5CA

270,000 C420C274(1)5U5CA

330,000 C420C334(1)5U5CA

390,000 C430C394(1)5U5CA

470,000 C430C474(1)5U5CA

560,000 C430C564(1)5U5CA

680,000 C430C684(1)5U5CA

820,000 C440C824(1)5U5CA

1,000,000 C440C105(1)5U5CA

KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

KEMET

CERAMIC CONFORMALLY COATED/AXIAL

“AXIMAX”

AXIMAX

RATINGS & PART NUMBER REFERENCE

CAPACITANCE

KEMET

pF PART NUMBER

100 VOLT - C0G

10 C410C100(1)1G5CA

12 C410C120(1)1G5CA

15 C410C150(1)1G5CA

18 C410C180(1)1G5CA

22 C410C220(1)1G5CA

27 C410C270(1)1G5CA

33 C410C330(1)1G5CA

39 C410C390(1)1G5CA

47 C410C470(1)1G5CA

56 C410C560(1)1G5CA

68 C410C680(1)1G5CA

82 C410C820(1)1G5CA

100 C410C101(1)1G5CA

120 C410C121(1)1G5CA

150 C410C151(1)1G5CA

180 C410C181(1)1G5CA

220 C410C221(1)1G5CA

270 C410C271(1)1G5CA

330 C410C331(1)1G5CA

390 C410C391(1)1G5CA

470 C410C471(1)1G5CA

560 C410C561(1)1G5CA

680 C410C681(1)1G5CA

820 C410C821(1)1G5CA

1,000 C410C102(1)1G5CA

1,200 C420C122(1)1G5CA

1,500 C420C152(1)1G5CA

1,800 C420C182(1)1G5CA

2,200 C420C222(1)1G5CA

2,700 C430C272(1)1G5CA

3,300 C430C332(1)1G5CA

3,900 C430C392(1)1G5CA

4,700 C430C472(1)1G5CA

5,600 C430C562(1)1G5CA

6,800 C430C682(1)1G5CA

8,200 C430C822(1)1G5CA

10,000 C440C103(1)1G5CA

12,000 C440C123(1)1G5CA

15,000 C440C153(1)1G5CA

50 VOLT - C0G

560 C410C561(1)5G5CA

680 C410C681(1)5G5CA

820 C410C821(1)5G5CA

1,000 C410C102(1)5G5CA

1,200 C412C122(1)5G5CA

1,500 C412C152(1)5G5CA

1,800 C412C182(1)5G5CA

2,200 C412C222(1)5G5CA

2,700 C412C272(1)5G5CA

1,200 C420C122(1)5G5CA

1,500 C420C152(1)5G5CA

1,800 C420C182(1)5G5CA

2,200 C420C222(1)5G5CA

2,700 C430C272(1)5G5CA

3,300 C430C332(1)5G5CA

3,900 C430C392(1)5G5CA

4,700 C430C472(1)5G5CA

5,600 C430C562(1)5G5CA

6,800 C430C682(1)5G5CA

8,200 C430C822(1)5G5CA

10,000 C440C103(1)5G5CA

12,000 C440C123(1)5G5CA

15,000 C440C153(1)5G5CA

ULTRA-STABLE

TEMPERATURE

CHARACTERISTIC—C0G/NP0

CAPACITANCE

KEMET

pF PART NUMBER

100 VOLT - X7R

470 C410C471(1)1R5CA

560 C410C561(1)1R5CA

680 C410C681(1)1R5CA

820 C410C821(1)1R5CA

1,000 C410C102(1)1R5CA

1,200 C410C122(1)1R5CA

1,500 C410C152(1)1R5CA

1,800 C410C182(1)1R5CA

2,200 C410C222(1)1R5CA

2,700 C410C272(1)1R5CA

3,300 C410C332(1)1R5CA

3,900 C410C392(1)1R5CA

4,700 C410C472(1)1R5CA

5,600 C410C562(1)1R5CA

6,800 C410C682(1)1R5CA

8,200 C410C822(1)1R5CA

10,000 C410C103(1)1R5CA

12,000 C410C123(1)1R5CA

15,000 C412C153(1)1R5CA

18,000 C412C183(1)1R5CA

22,000 C412C223(1)1R5CA

27,000 C412C273(1)1R5CA

15,000 C420C153(1)1R5CA

18,000 C420C183(1)1R5CA

22,000 C420C223(1)1R5CA

27,000 C420C273(1)1R5CA

33,000 C420C333(1)1R5CA

39,000 C430C393(1)1R5CA

47,000 C430C473(1)1R5CA

56,000 C430C563(1)1R5CA

68,000 C430C683(1)1R5CA

82,000 C430C823(1)1R5CA

100,000 C430C104(1)1R5CA

120,000 C440C124(1)1R5CA

150,000 C440C154(1)1R5CA

50 VOLT - X7R

8,200 C410C822(1)5R5CA

10,000 C410C103(1)5R5CA

12,000 C410C123(1)5R5CA

15,000 C410C153(1)5R5CA

18,000 C410C183(1)5R5CA

22,000 C410C223(1)5R5CA

27,000 C410C273(1)5R5CA

33,000 C410C333(1)5R5CA

39,000 C410C393(1)5R5CA

47,000 C410C473(1)5R5CA

56,000 C412C563(1)5R5CA

68,000 C412C683(1)5R5CA

82,000 C412C823(1)5R5CA

100,000 C412C104(1)5R5CA

56,000 C420C563(1)5R5CA

68,000 C420C683(1)5R5CA

82,000 C420C823(1)5R5CA

100,000 C420C104(1)5R5CA

120,000 C430C124(1)5R5CA

150,000 C430C154(1)5R5CA

180,000 C430C184(1)5R5CA

220,000 C430C224(1)5R5CA

270,000 C430C274(1)5R5CA

330,000 C440C334(1)5R5CA

390,000 C440C394(1)5R5CA

470,000 C440C474(1)5R5CA

SINGLE

TEMPERATURE

CHARACTERISTIC—X7R

(1) Insert proper letter for capacitance tolerance desired:

J = ±5%

K = ±10%

M = ±20%

(1) Insert proper letter for capacitance tolerance desired:

K = ±10%, M = ±20%

GENERAL PURPOSE

TEMPERATURE

CHARACTERISTIC—Z5U

(1) Insert proper letter for capacitance tolerance desired:

M = ±20%, Z = +80, -20%

For packaging information, see pages 32 and 34.

NOTE: Certain NPO and X7R dielectric capacitance

values are available upon request in 200 volts. Contact

your local KEMET sales representative for exact values,

price and delivery.

CERAMIC LEADED

PACKAGING INFORMATION

KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

KEMET

Adhesive Tape

Kraft Paper

Interleaving

Figure 1

Figure 2

(82.6)

.655" ±0.010"

(16.6 ±0.25)

10.5" - 14"

(26.67 -

35.56cm)

.059" to .315"

Greater Than

Component

Length

Hub

1/8"

(3.18)

Figure 3

See Table 1

(B)

.250" Nom.

(6.35)

.047" Max

(1.20)

See Table 1 (A)

Ceramic Axial

Lead Tape and Reel Packaging

KEMET offers standard reeling of Molded and Conformally

Coated Axial Leaded Ceramic Capacitors for automatic insertion

or lead forming machines per EIA specification RS-296. KEMET’S

internal specification four-digit suffix, 7200, is placed at the end of

the part number to designate tape and reel packaging, ie:

C410C104Z5U5CA7200.

Paper (50 lb.) test minimum is inserted between the layers of

capacitors wound on reels for component pitch ≤ 0.400".

Capacitor lead length may extend only a maximum of .0625"

(1.59mm) beyond the tapes' edges. Capacitors are centered in a

row between the two tapes and will deviate only ± 0.031

(0.79mm) from the row center. A minimum of 36" (91.5 cm) leader

tape is provided at each end of the reel capacitors. Universal

splicing clips are used to connect the tape. Standard reel

quantities are shown on page 34.

Dimensions in Inches & (Millimeters)

* Not Available for Conformally Coated Parts.

Component

Body Diameter Component

Pitch "A" Inside Tape Spacing "B"

± 1.5mm (0.059")

0.020" or (±0.5mm) I III*

0" (0mm) to 0.197" (5mm)

0.197" (5.01mm) to 0.394: (10mm) 0.197" or (5mm)

0.394" or (10mm) 2.062" (52.4mm) 2.874" (73mm)

Table 1

CERAMIC PACKAGING

Standard (1) Standard

KEMET Military Military Bulk Reel Reel

Number Style Specification Quantity Quantity Size

C114C-K-G CK12, CC75 MIL-C-11015/ 200/Box 5000 12"

C124C-K-G CK13, CC76 MIL-PRF-20 200/Box 5000 12"

C192C-K-G CK14, CC77 100/Box 3000 12"

C202C-K CK15 25/Box 500 12"

C222C-K CK16 10/Tray 300 12"

C052C-K-G CK05, CC05 100/Bag 2000 12"

C062C-K-G CK06, CC06 100/Bag 1500 12"

C114G CCR75 MIL-PRF-20 200/Box 5000 12"

C124G CCR76 200/Box 5000 12"

C192G CCR77 100/Box 3000 12"

C202G CC78-CCR78 25/Box 500 12"

C222G CC79-CCR79 10/Tray 300 12"

C052/56G CCR05 100/Bag 1700 12"

C062/66G CCR06 100/Bag 1500 12"

C512G CC07-CCR07 Footnote (2) N/A N/A

C522G CC08-CCR08 Footnote (2) N/A N/A

C114T CKR11 MIL-PRF-39014 200/Box 5000 12"

C124T CKR12 200/Box 5000 12"

C192T CKR14 100/Box 3000 12"

C202T CKR15 25/Box 500 12"

C222T CKR16 10/Tray 300 12"

C052/56T CKR05 100/Bag 1700 12"

C062/66T CKR06 100/Bag 1500 12"

C31X 500/Bag 2500 12"

C32X 500/Bag 2500 12"

C33X 250/Bag 1500 12"

C340 100/Bag 1000 12"

C350 50/Bag N/A N/A

C410 300/Box 5000 12"

C412 200/Box 5000 12"

C420 300/Box 5000 12"

C430 200/Box 2500 12"

C440 200/Box 2500 12"

C512 N/A N/A Footnote (2) N/A N/A

C522 N/A N/A Footnote (2) N/A N/A

CERAMIC LEADED

PACKAGING INFORMATION

KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

KEMET

NOTE: (1) Standard packaging refers to number of pieces per bag, box, tray or vial.

(2) Quantity varies. For further details, please consult the factory.