01-91180-4 - Electroswitch - Datasheet.Directory

03-91080 Type

Incandescent Miniature

General Purpose

Size T-1 ¾

59-52280 Type

Incandescent Miniature

Optional Press to Test

Size T-1 ¾

01-91180 Type

Originally designed

to meet MS 25041

Incandescent Miniature

Size T-1 ¾

Press to Test

Material and Finishes

Mounting tube and nuts, alumi-

num, black anodized per

MIL-A-8625A. Lockwasher, stain-

less steel. Brass terminals, tin

plated per MIL-T-10727A.

Cap Assembly

Lens, high impact-resistant plastic

per L-P-349.

Lamp

T-1 ¾ midget  ange base. See

Lamp Selection Guide.

Mounting

Assembly mounts from rear of

panel. All mounting hardware

supplied. Recommended mount-

ing hole .500 in. ±015 in. dia.

Weight

Approximately .4 oz. less lamp.

Material and Finishes

Mounting tube and knurled nut,

clear anodized per MIL-A-8625A.

Mounting nut and key washer,

brass, nickel plate. Lockwasher,

stainless steel or steel, nickel plate,

Brass terminals, tin plated per

MIL-T-10727A.

Cap Assembly

Lens, high impact-resistant plastic

per L-P-349. Friction  t lens caps,

rotatable or keyed. Uses Presslite

friction cap pushbuttons.

Lamp

T-1 ¾ midget  ange base.

Mounting

Assembly mounts from rear of

panel. All mounting hardware

supplied. Recommended mount-

ing hole, see drawing.

Weight

Approximately .5 oz. less lamp.

Material and Finishes

Mounting tube and nuts, alu-

minum, black anodized per MtL-A-

8625A. Lockwasher, stainless steel.

Brass terminals, tin plated per

MIL-T-10727A.

Cap Assembly

Lens, high impact-resistant plastic

per L-P-349, NVG Green,  at glass

lens. Lens holders, aluminum,

black anodized.

Lamp

T-1 ¾ midget  ange base.

Mounting

Assembly mounts from rear of

panel. All mounting hardware

supplied. Recommended mount-

ing hole .500 in. ±.015 dia.

Identi cation

Identi ed with MS P/N and base

assembly number.

Weight

Approximately .5 oz. less lamp.

Optolite Products

03-90980 Type

Incandescent Miniature

Size T-1 ¾

02-91180 Type

Originally designed

to meet MS 25331

Incandescent Standard

Size T-3 ¼

05-90880 Type

05-90881 Type

Incandescent Miniature

Watertight - Size T-1 ¾

Press to Test

Material and Finishes

Mounting tube, black glass  lled

nylon per MIL-M-19887. Mounting

nut aluminum, black anodized

per MIL-A-8625A. Lockwasher,

stainless steeel or steel, nickel

plate. Brass terminals, tin plated

per MIL-T-10727A.

Cap Assembly

Lens, high impact-resistant plastic

per L-P-349. Lens holders are

aluminum, black anodized.

Lamp

T-1 ¾ midget  ange base.

Mounting

Assembly mounts from front of

panel. All mounting hardware

supplied. Recommended mount-

ing hole .500 in. +/- .015 in. dia.

Weight

Approx. .9 oz. less lamp.

Material and Finishes

Mounting tube and nuts, alumi-

num, black anodized per MIL-A-

8625A. Lockwasher, stainless steel.

Brass terminals, tin plated per

MIL-T-10727A.

Cap Assembly

Lens is high impact-resistant

plastic per L-P-34g. Lens holders,

aluminum, black anodized.

Lamp

T-3 ¼ miniature bayonet base.

Mounting

Assembly mounts from rear of

panel. All mounting hardware

supplied. Recommended mount-

ing hole .640 in. ± .015 in. dia.

Identi cation

Identi ed with MS P/N and base

assembly number

Weight

Approximately .8 oz. less lamp.

Material and Finishes

Mounting tube, black glass  lled

nylon per MIL-M-19887. Mounting

nut aluminum, black anodized per

MIL-A-8625A. Lockwasher, stain-

less steeel or steel, nickel plate.

Brass terminals, tin plated per

MIL-T-10727A. Rubber boot and

washer, silicone rubber.

Cap Assembly

Lens, high impact-resistant plastic

per L-P-349. Lens holders are

aluminum, black anodized.

Lamp

T-1 ¾ midget  ange base.

Mounting

Assembly mounts from front of

panel. All mounting hardware

supplied. Recommended mount-

ing hole .500 in. +/- .015 in. dia.

Weight

Approx. .3 oz. less lamp.

Optolite Products

05-91182 Type

Incandescent Miniature

Watertight - Size T-1 ¾

06-91182 Type

Incandescent Watertight

Size T-3 ¼

08-83281 Type

Incandescent Miniature

EMI Suppressed

Size T-1 ¾

Press to Test

Material and Finishes

Mounting tube and nuts,

aluminum, black anodized per

MIL-A-8625A. Lockwasher, stain-

less steel or steel, nickel plate.

Brass terminals, tin plated per

MIL-T-1O727A. Rubber boot and

washer, silicone rubber.

Cap Assembly

Lens, high impact-resistant plastic

per L-P-349 Lens holders are

aluminum, black anodized.

Lamp

T-1 ¾ midget  ange base.

Mounting

Assembly mounts from rear of

panel. All mounting hardware

supplied. Recommended mount-

ing hole .500 in. ± .015 in. dia.

Weight

Approximately .44 oz. less lamp.

Material and Finishes

Mounting tube and nuts,

aluminum, black anodized per

MIL-A-8625A. Lockwasher, stain-

less steel or steel, nickel plate.

Brass terminals, tin plated per

MIL-T-10727A. Rubber boot and

washer, silicone rubber.

Cap Assembly

Lens, high impact-resistant plastic

per L-P-349. Lens holders, alumi-

num, black anodized.

Lamp

T-3 ¼ miniature bayonet base.

Mounting

Assembly mounts from rear of

panel. All mounting hardware

supplied. Recommended mount-

ing hole .640 in. ± .015 in. dia.

Weight

Approximately .85 oz. less lamp.

Material and Finishes

Lens holder and front mounting

nut is black anodized per MIL-A-

8625A. Mounting tube & rear Mtg.

nut, is bright nickel plated per

QQ-N-200. Lockwasher is stainless

steel. Terminals brass, gold plated

per MIL-G-45204.

Cap Assembly

Lens is high impact-resistant

plastic per L-P-349. Lens. holders

are aluminum, black anodized.

Lamp

T-1 ¾ midget  ange base.

Mounting

Assembly mounts from rear of

panel. All mounting hardware

supplied. Flat on Mtg. tube pro-

vides for keyed installation.

Weight

Approx. .5 oz less lamp.

Optolite Products

08-83283 Type

Incandescent Miniature

EMI Suppressed Watertight

Size T-1 ¾

04-VM906 Type

Incandescent General Purpose

Size T-3 ¼

Press to Test

Material and Finishes

Round mounting nut, aluminum,

black anodized per MIL-A-8625A.

Mounting tube and mounting

nut, bright nickel plated per

QQ-N-290. Lockwasher, steel,

nickel plated. Rubber boot and

washer, silicone rubber Brass

terminals, gold plated per MIL-

G-45204,

Cap Assembly

Lens, high impact-resistant plastic

per L-P-349. Lens holders, alumi-

num, black anodized.

Lamp

T-1 ¾ midget  ange base.

Mounting

Assembly mounts from rear of

panel. All mounting hardware

supplied. Flat on mounting tube

provides for keyed installation.

Weight

Approximately .6 oz. less lamp.

Material and Finishes

Mounting tube, aluminum, black

anodized per MIL-A-8625A.

Mounting nut, steel cad plate per

QQ-P-416. Lockwasher, stainless

steel or steel, nickel plate. Brass

terminals, tin plated per MIL-T-

10727A.

Cap Assembly

Lens, high impact-resistant plastic

per L-P-349. Standard colors are

semi-di using.

Lamp

T-3 ¼ miniature bayonet base.

Mounting

Assembly mounts from front of

panel. All mounting hardware

supplied. Recommended mount-

ing hole .640 in. +/- .015 in. dia.

Weight

Approx. .55 oz. less lamp.

Optolite Products

Electroswitch Electronic Products • 2010 Yonkers Road • Raleigh, North Carolina

T 888-768-2797 • F 800-909-9171 • www.electro-nc.com

03-93480 Type

03-93481 Type

Incandescent Miniature

General Purpose - Size T-1 ¾

99-33080 Type

99-33081 Type

Incandescent Subminiature

General Purpose - Size T-1

Press to Test

Push In

Materials and Fiber

Mounting tube and nuts are

aluminum, black anodized per

MIL-A-8625A. Lockwasher, stain-

less steel or steel, nickel plated.

Terminals are 4-40 screws, nickel

plate QQ-N-290.

Cap Assembly

Lens is high impact-resistant

plastic per L-P-349a.

Lamp

T-1 ¾ midget  ange base.

Standard colors are transparent.

Also available in translucent or

di using caps.

Mounting

Assembly mounts from rear of

panel. All mounting hardware

supplied. Recommended mount-

ing hole .500 ± .015 diameter.

Weight

Approximately .50 oz. less lamp.

Material and Finishes

Housing and lamp base, gray glass

 lled nylon. Terminals, beryllium

copper, gold  ashed. Retainer clip,

stainless steel.

Lens Cap

High impact-resistant plastic per

L-P-393 (polycarbonate).

Lamp

T-1 wire terminal lamp; Lamp is

replaced by removing snap-on

cap.

Mounting

Press-in: Assembly press  ts into

.189 in. dia. hole. No mounting

hardware required.

Retainer clip: For mounting

assembly into .200 in. ± 005 in.

dia. hole or panels less than .06

in. thick. Order clip 2-1186-643

separately.

Optolite Products

Electroswitch Electronic Products • 2010 Yonkers Road • Raleigh, North Carolina

T 888-768-2797 • F 800-909-9171 • www.electro-nc.com