BDX54, BDX54A, BDX54B, BDX54C PNP SILICON POWER DARLINGTONS Copyright (c) 1997, Power Innovations Limited, UK MAY 1989 - REVISED MARCH 1997 Designed for Complementary Use with BDX53, BDX53A, BDX53B and BDX53C TO-220 PACKAGE (TOP VIEW) 60 W at 25C Case Temperature 8 A Continuous Collector Current B 1 Minimum hFE of 750 at 3 V, 3 A C 2 E 3 Pin 2 is in electrical contact with the mounting base. MDTRACA absolute maximum ratings at 25C case temperature (unless otherwise noted) RATING SYMBOL BDX54 Collector-base voltage (IE = 0) BDX54A BDX54B VCBO BDX54C Collector-emitter voltage (IB = 0) BDX54B UNIT -45 -60 -80 V -100 BDX54 BDX54A VALUE -45 VCEO BDX54C -60 -80 V -100 V EBO -5 V Continuous collector current IC -8 A Continuous base current IB -0.2 A Continuous device dissipation at (or below) 25C case temperature (see Note 1) Ptot 60 W Continuous device dissipation at (or below) 25C free air temperature (see Note 2) Ptot 2 W Tj -65 to +150 C Tstg -65 to +150 C TA -65 to +150 C Emitter-base voltage Operating junction temperature range Operating temperature range Operating free-air temperature range NOTES: 1. Derate linearly to 150C case temperature at the rate of 0.48 W/C. 2. Derate linearly to 150C free air temperature at the rate of 16 mW/C. PRODUCT INFORMATION Information is current as of publication date. Products conform to specifications in accordance with the terms of Power Innovations standard warranty. Production processing does not necessarily include testing of all parameters. 1 BDX54, BDX54A, BDX54B, BDX54C PNP SILICON POWER DARLINGTONS MAY 1989 - REVISED MARCH 1997 electrical characteristics at 25C case temperature (unless otherwise noted) PARAMETER V (BR)CEO ICEO ICBO IEBO hFE V BE(sat) VCE(sat) VEC TEST CONDITIONS Collector-emitter MIN -45 BDX54A -60 BDX54B -80 BDX54C -100 TYP MAX IC = -100 mA IB = 0 VCE = -30 V IB = 0 BDX54 -0.5 Collector-emitter V CE = -30 V IB = 0 BDX54A -0.5 cut-off current V CE = -40 V IB = 0 BDX54B -0.5 V CE = -50 V IB = 0 BDX54C -0.5 VCB = -45 V IE = 0 BDX54 -0.2 Collector cut-off V CB = -60 V IE = 0 BDX54A -0.2 current V CB = -80 V IE = 0 BDX54B -0.2 V CB = -100 V IE = 0 BDX54C -0.2 VEB = -5 V IC = 0 VCE = -3 V IC = -3 A (see Notes 3 and 4) IB = -12 mA IC = -3 A IB = -12 mA IC = -3 A IE = -3 A breakdown voltage Emitter cut-off current Forward current transfer ratio Base-emitter saturation voltage Collector-emitter saturation voltage Parallel diode forward voltage (see Note 3) BDX54 UNIT V mA mA -2 mA (see Notes 3 and 4) -2.5 V (see Notes 3 and 4) -2 V -2.5 V 750 IB = 0 NOTES: 3. These parameters must be measured using pulse techniques, tp = 300 s, duty cycle 2%. 4. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts. thermal characteristics MAX UNIT RJC Junction to case thermal resistance PARAMETER MIN TYP 2.08 C/W RJA Junction to free air thermal resistance 62.5 C/W MAX UNIT resistive-load-switching characteristics at 25C case temperature PARAMETER MIN TYP ton Turn-on time IC = -3 A IB(on) = -12 mA IB(off) = 12 mA 1 s toff Turn-off time V BE(off) = 4.2 V RL = 10 tp = 20 s, dc 2% 5 s Voltage and current values shown are nominal; exact values vary slightly with transistor parameters. PRODUCT 2 TEST CONDITIONS INFORMATION BDX54, BDX54A, BDX54B, BDX54C PNP SILICON POWER DARLINGTONS MAY 1989 - REVISED MARCH 1997 TYPICAL CHARACTERISTICS TYPICAL DC CURRENT GAIN vs COLLECTOR CURRENT VCE(sat) - Collector-Emitter Saturation Voltage - V TCS125AG 40000 hFE - Typical DC Current Gain COLLECTOR-EMITTER SATURATION VOLTAGE vs COLLECTOR CURRENT TC = -40C TC = 25C TC = 100C 10000 1000 VCE = -3 V tp = 300 s, duty cycle < 2% 100 -0*5 -1*0 TCS125AH -3*0 tp = 300 s, duty cycle < 2% IB = IC / 100 -2*5 -2*0 -1*5 -1*0 TC = -40C TC = 25C TC = 100C -0*5 -10 0 -0*5 IC - Collector Current - A -1*0 -10 IC - Collector Current - A Figure 1. Figure 2. BASE-EMITTER SATURATION VOLTAGE vs COLLECTOR CURRENT TCS125AI VBE(sat) - Base-Emitter Saturation Voltage - V -3*0 -2*0 TC = -40C TC = 25C TC = 100C -2*5 -1*0 -1*5 IB = IC / 100 t p = 300 s, duty cycle < 2% -0*5 -0*5 -1*0 -10 IC - Collector Current - A Figure 3. PRODUCT INFORMATION 3 BDX54, BDX54A, BDX54B, BDX54C PNP SILICON POWER DARLINGTONS MAY 1989 - REVISED MARCH 1997 MAXIMUM SAFE OPERATING REGIONS MAXIMUM FORWARD-BIAS SAFE OPERATING AREA -100 SAS125AD IC - Collector Current - A DC Operation tp = 300 s, d = 0.1 = 10% -10 -1*0 BDX54 BDX54A BDX54B BDX54C -0*1 -1*0 -10 -100 -1000 VCE - Collector-Emitter Voltage - V Figure 4. THERMAL INFORMATION MAXIMUM POWER DISSIPATION vs CASE TEMPERATURE TIS120AB Ptot - Maximum Power Dissipation - W 80 70 60 50 40 30 20 10 0 0 25 50 75 100 TC - Case Temperature - C Figure 5. PRODUCT 4 INFORMATION 125 150 BDX54, BDX54A, BDX54B, BDX54C PNP SILICON POWER DARLINGTONS MAY 1989 - REVISED MARCH 1997 MECHANICAL DATA TO-220 3-pin plastic flange-mount package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. TO220 4,70 4,20 o 10,4 10,0 3,96 3,71 1,32 1,23 2,95 2,54 see Note B 6,6 6,0 15,90 14,55 see Note C 6,1 3,5 1,70 1,07 0,97 0,61 1 2 14,1 12,7 3 2,74 2,34 5,28 4,88 VERSION 1 0,64 0,41 2,90 2,40 VERSION 2 ALL LINEAR DIMENSIONS IN MILLIMETERS NOTES: A. The centre pin is in electrical contact with the mounting tab. B. Mounting tab corner profile according to package version. C. Typical fixing hole centre stand off height according to package version. Version 1, 18.0 mm. Version 2, 17.6 mm. PRODUCT MDXXBE INFORMATION 5 BDX54, BDX54A, BDX54B, BDX54C PNP SILICON POWER DARLINGTONS MAY 1989 - REVISED MARCH 1997 IMPORTANT NOTICE Power Innovations Limited (PI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to verify, before placing orders, that the information being relied on is current. PI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with PI's standard warranty. Testing and other quality control techniques are utilized to the extent PI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except as mandated by government requirements. PI accepts no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor is any license, either express or implied, granted under any patent right, copyright, design right, or other intellectual property right of PI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. PI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS. Copyright (c) 1997, Power Innovations Limited PRODUCT 6 INFORMATION