High Speed Fiber Optic Transmitter OPF1412, OPF1412T, OPF1414, OPF1414T Features: * * * * * * * Low cost High speed No mounting hardware required Wide temperature range 100% LED burn-in (96 hours) SMA or ST style ports Wave solderable Product Photo Here T-Package Description: The OPF1412 and OPF1414 series fiber optic transmitters contain a high speed 840 nm GaAIAs LED. This LED in conjunction with the package lensing is designed to efficiently couple light into multimode optical fibers ranging in size from 50/125 m up to 200/230 m. The high coupling efficiency of the LED and lensing allows the devices to be used at low current drive levels thus decreasing the power consumption and increasing system reliability. The consistency of coupling varies by less than 5 dB from part to part which reduces the dynamic range requirements of the receiver. The high power (-16.0 dBm into 50/125 m) OPF1414 was designed for small fiber applications or where there are large fixed losses such as in systems that contain star couplers or in line connectors. The OPF1412 (-12.0 dBm optical power) is ideal for 100/140 m fiber applications. For custom electrical and optical requirements contact your local representative or OPTEK for more information. OPF1412 OPF1414 RoHS Pin # Description Pin # Description 1 No Connection 8 No Connection 2 Anode 7 Anode 3 Cathode 6 Anode 4 No Connection 5 No Connection OPF1412T OPF1414T Typ. dBm into 50/125m @ 60mA Typ. dBm into 100/140m @ 60mA OPF1412 -16.0 -12.0 OPF1412T -16.0 -12.0 OPF1414 -12.0 -6.5 OPF1414T -12.0 -6.5 Part Number OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 02/07 Page 1 of 3 High Speed Fiber Optic Transmitter OPF1412, OPF1412T, OPF1414, OPF1414T Absolute Maximum Ratings (TA=25C unless otherwise noted) Storage Temperature Range -55C to +85C Operating Temperature Range -40C to +85C Peak 200 mA DC 100 mA Forward Input Current Reverse Input Voltage 1.8 V Lead Soldering Temperature (1/16" (1.6 mm) from case for 5 seconds with soldering iron) Notes: (1) (1) 260 C All parameters tested using pulse technique. Electrical Characteristics (TA = -40 C to +85 C unless otherwise noted) Typ. values are at 25 C. Symbol VF Parameter Forward Voltage Min Typ Max Units 1.48 1.70 1.84 2.09 V IF = 60 mA IF = 100 mA -0.20 mV/C IF = 60 mA V IR = 100 A nm IF = 60 mA 55 pF V = 0, f = 1 MHz -.008 -.020 dB/C VF/T Forward Voltage Temperature Coefficient VBR Reverse Input Voltage 1.8 3.8 p Peak Emission Wavelength 820 840 CT Diode Capacitance PT/T Optical Power Temperature Coefficient tr, tf Rise Time, Fall Time (10% to 90%) 4.0 865 6.5 ns Test Conditions IF= 60 mA IF = 100 mA IF = 60 mA, no pre-bias Peak Output Optical Power Symbol PT100 PT62 PT50 Parameter 100/140 m Fiber Cable N.A. = 0.30 62.5/125 m Fiber Cable N.A. = 0.275 50/125 m Fiber Cable N.A. = 0.20 1412 1414 Min Typ Max Min Typ Max -15.0 -16.0 -13.5 -15.1 -12.0 -10.0 -9.0 -7.6 -7.0 -9.5 -10.5 -8.0 -9.6 -6.5 -4.5 -3.5 -2.1 -1.5 -19.0 -20.0 -17.5 -19.1 -16.0 -14.0 -13.0 -11.6 -11.0 -15.0 -16.0 -13.5 -15.1 -12.0 -21.8 -22.8 -20.3 -21.9 -18.8 -16.8 -15.8 -14.4 -13.8 -18.8 -19.8 -17.3 -18.9 -15.8 -10.0 -14.0 -16.8 -4.5 -10.0 -13.8 -10.0 -9.0 -7.6 -7.0 -13.8 -12.8 -11.4 -10.8 Unit Test Condition IF = 60 mA, TA = 25C dBm IF = 100 mA, TA = 25C IF = 60 mA, TA = 25C dBm IF = 100 mA, TA = 25C IF = 60 mA, TA = 25C dBm IF = 100 mA, TA = 25C OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 02/07 Page 2 of 3 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com High Speed Fiber Optic Transmitter OPF1412, OPF1412T, OPF1414, OPF1414T Relative Coupled Power vs Forward Current Typical Forward Voltage vs Forward Current 1.4 2.0 Temperatures are Stepped in 20C increments. Temperatures are Stepped in 20C 1.9 increments. -40C 1.8 Forward Voltage Relative Coupled Power 1.2 1.0 0.8 80C 0.6 1.7 1.6 -40C 1.5 0.4 1.4 80C 0.2 1.3 0 1.2 0 20 40 60 80 100 0 20 Forward Current (mA) 40 60 80 100 Forward Current (mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 02/07 Page 3 of 3