SLOT TEN-3-04 - Coilcraft, Inc. - Datasheet.Directory

Specifications subject to change without notice.

Please check our website for latest information.

“SLOT TEN” 10 mm Tunable Inductors

Document 113-1

Document 113-1 Revised 12/08/08

These versatile Coilcraft variable inductors operate over

a wide range of frequencies. Standard inductance val-

ues are available from less than 1 µH to over 1 mH.

Coilcraft “SLOT TEN” RF coils come in an interna-

tional 10 mm package. Their precision-molded slotted

bobbins ensure tight tolerances and high stability.

A variety of magnetic and electrostatic shielding op-

tions are offered. “SLOT TEN” coils are tuned by means

of ferrite or powdered iron tuning cores.

Coilcraft Designer’s Kit M100 contains 18 shielded

and 18 unshielded coils (3 each) plus extra cores and

sleeves to create all of the standard values shown.

To order, please contact Coilcraft or purchase on-

line at http://order.coilcraft.com.

Unshielded (Styles 1 and 2)

With Shielded Cans (Styles 3 ,4 and 5)

3 TOOLS IN 1

TUNING WRENCH

TRITUNER

SEE INDEX

0.157 ±0.010

4,00 0,25±

Tab Length

0.512 ±0.008

13,0 ±0,203

0.411

10,45 max sq

5mmdia

0.375

9,5 tab centers

0.060 ±0.010

1,5 ±0,25

0.026

dia nom

0.276

7,01 mm 0.380 ±0.005

9,65 mm ±0,127

0.276 ±0.005

7,01 mm ±0,127

0.500 ±0.010

12,7 mm ± 0,254

0.138 ±0.020

3,50 mm ±0,508 *Brown color dot

coils 10 thru 18

Recommended

Board Layout

0.138

3,505

0.138

3,505

0.1875

4,76

(5)

0.046

1,168

0.080

2,03

(for shield

can tabs)

This product is not RoHS-compliant. Contact Coilcraft

for current status or possible alternatives.

Specifications subject to change without notice.

Please check our website for latest information.

Document 113-2

Document 113-2 Revised 12/08/08

Selection Guide

Coilcraft “SLOT TEN” coils come in five different styles. Consult this table for the inductance range, relative Q and

shielding options of each style. Then use the appropriate specification chart to pick a specific part number.

Electrostatic Magnetic Recommended

Style L (µH) shield shield frequency Tuning core Relative Q Relative cost

Style 1 0.8 – 624 No No Higher Iron Hi Low

Style 2 0.8 – 927 No No Ferrite Hi Low

Style 3 0.7 – 450 Yes No Iron Low Med

Style 4 0.8 – 624 Yes Yes (Iron) Iron Med Hi

Style 5 0.9 – 1143 Yes Yes (Ferrite) Lower Ferrite Med Hi

Notes:

1. All readings taken on Agilent/HP 4342-A Q Meter.

2. L min is achieved at maximum extension of the core toward PC board.

Complete tuning range is reached within the boundaries of the coil form.

3. All specifications are at standard “Q” meter frequencies. L and Q

readings change with frequency.

4. Unshielded parts are coated with lacquer to protect the winding.

5. Shielded parts have a sleeve insert to protect the winding.

6. Operating temperature range –40°C to +85°C.

7. Electrical specifications at 25°C.

Style 1 — Unshielded with Carbonyl E Core

Q min Test

Part number Color L min (µH) L max (µH) L nom (µH) @ L nom frequency

SLOT TEN-1-01 Brown 0.800 1.2 1.0 48 7.9 MHz

SLOT TEN-1-02 Red 1.2 1.8 1.5 50 7.9 MHz

SLOT TEN-1-03 Orange 1.76 2.64 2.2 56 7.9 MHz

SLOT TEN-1-04 Yellow 2.56 3.84 3.2 54 7.9 MHz

SLOT TEN-1-05 Green 3.6 5.4 4.5 54 7.9 MHz

SLOT TEN-1-06 Blue 5.2 7.8 6.5 51 7.9 MHz

SLOT TEN-1-07 Violet 7.6 11.4 9.5 48 7.9 MHz

SLOT TEN-1-08 Gray 11.2 16.8 14.0 38 2.5 MHz

SLOT TEN-1-09 White 16.0 24.0 20.0 38 2.5 MHz

SLOT TEN-1-10 Black* 22.4 33.6 28.0 38 2.5 MHz

SLOT TEN-1-11 Brown* 32.0 48.0 40.0 38 2.5 MHz

SLOT TEN-1-12 Red* 46.4 69.6 58.0 47 2.5 MHz

SLOT TEN-1-13 Orange* 67.2 100.2 84.0 48 2.5 MHz

SLOT TEN-1-14 Yellow* 96 144 120.0 40 790 KHz

SLOT TEN-1-15 Green* 137.6 206.4 172.0 34 790 KHz

SLOT TEN-1-16 Blue* 200 300 250.0 39 790 KHz

SLOT TEN-1-17 Violet* 280 432 360.0 30 790 KHz

SLOT TEN-1-18 Gray* 416 624 520.0 35 790 KHz

* Coils 10 thru 18 have a brown color dot on bottom of coil base.

Style 2 — Unshielded with Ferrite Core

Q min Test

Part number Color L min (µH) L max (µH) L nom (µH) @ L nom frequency

SLOT TEN-2-01 Brown 0.80 1.7 1.2 47 7.9 MHz

SLOT TEN-2-02 Red 1.25 2.75 2.0 48 7.9 MHz

SLOT TEN-2-03 Orange 1.75 4.0 2.9 48 7.9 MHz

SLOT TEN-2-04 Yellow 2.4 5.4 3.9 47 7.9 MHz

SLOT TEN-2-05 Green 3.5 7.8 5.6 47 7.9 MHz

SLOT TEN-2-06 Blue 4.7 10.6 7.6 46 7.9 MHz

SLOT TEN-2-07 Violet 7.4 15.6 11.5 38 2.5 MHz

SLOT TEN-2-08 Gray 11 25 18.2 40 2.5 MHz

SLOT TEN-2-09 White 16 35 25.3 40 2.5 MHz

SLOT TEN-2-10 Black* 22 50 36.5 40 2.5 MHz

SLOT TEN-2-11 Brown* 33 72 52.5 39 2.5 MHz

SLOT TEN-2-12 Red* 46 103 74.8 51 2.5 MHz

SLOT TEN-2-13 Orange* 66 136 100 40 790 KHz

SLOT TEN-2-14 Yellow* 95 198 146 44 790 KHz

SLOT TEN-2-15 Green* 136 297 216 40 790 KHz

SLOT TEN-2-16 Blue* 198 426 312 45 790 KHz

SLOT TEN-2-17 Violet* 286 630 530 33 790 KHz

SLOT TEN-2-18 Gray* 418 927 790 38 790 KHz

* Coils 10 thru 18 have a brown color dot on bottom of coil base.

Specifications subject to change without notice.

Please check our website for latest information.

Document 113-3

Document 113-3 Revised 12/08/08

Style 3 — Shielded with Carbonyl E Core and Plastic Sleeve

Q min Test

Part number Color L min (µH) L max (µH) L nom (µH) @ L nom frequency

SLOT TEN-3-01 Brown 0.70 0.94 0.82 65 7.9 MHz

SLOT TEN-3-02 Red 1.05 1.41 1.23 37 7.9 MHz

SLOT TEN-3-03 Orange 1.5 2.0 1.75 40 7.9 MHz

SLOT TEN-3-04 Yellow 2.04 2.76 2.4 40 7.9 MHz

SLOT TEN-3-05 Green 2.9 3.9 3.4 39 7.9 MHz

SLOT TEN-3-06 Blue 4.25 5.75 5.0 38 7.9 MHz

SLOT TEN-3-07 Violet 6 8.2 7.1 35 7.9 MHz

SLOT TEN-3-08 Gray 9.4 12.6 11.0 25 2.5 MHz

SLOT TEN-3-09 White 12.8 17.2 15.0 25 2.5 MHz

SLOT TEN-3-10 Black* 18.7 25.3 22.0 26 2.5 MHz

SLOT TEN-3-11 Brown* 26.4 35.6 31.0 25 2.5 MHz

SLOT TEN-3-12 Red* 37.4 50.6 44 29 2.5 MHz

SLOT TEN-3-13 Orange* 52.7 71.3 62 30 2.5 MHz

SLOT TEN-3-14 Yellow* 79 105 92 28 2.5 MHz

SLOT TEN-3-15 Green* 108.8 147.2 128 18 790 KHz

SLOT TEN-3-16 Blue* 155 208 182 20 790 KHz

SLOT TEN-3-17 Violet* 230 310 270 16 790 KHz

SLOT TEN-3-18 Gray* 336 450 390 18 790 KHz

* Coils 10 thru 18 have a brown color dot on bottom of coil base.

Style 4 — Shielded with Carbonyl E Core and Sleeve

Q min Test

Part number Color L min (µH) L max (µH) L nom (µH) @ L nom frequency

SLOT TEN-4-01 Brown 0.80 1.2 1.0 44 7.9 MHz

SLOT TEN-4-02 Red 1.2 1.8 1.5 45 7.9 MHz

SLOT TEN-4-03 Orange 1.76 2.64 2.2 48 7.9 MHz

SLOT TEN-4-04 Yellow 2.56 3.84 3.2 48 7.9 MHz

SLOT TEN-4-05 Green 3.6 5.4 4.5 46 7.9 MHz

SLOT TEN-4-06 Blue 5.2 7.8 6.5 43 7.9 MHz

SLOT TEN-4-07 Violet 7.6 11.4 9.5 40 7.9 MHz

SLOT TEN-4-08 Gray 11.2 16.8 14 32 2.5 MHz

SLOT TEN-4-09 White 16.0 24.0 20 33 2.5 MHz

SLOT TEN-4-10 Black* 22.4 33.6 28 32 2.5 MHz

SLOT TEN-4-11 Brown* 32.0 48.0 40 32 2.5 MHz

SLOT TEN-4-12 Red* 46.4 69.6 58 40 2.5 MHz

SLOT TEN-4-13 Orange* 67.2 100.8 85 40 2.5 MHz

SLOT TEN-4-14 Yellow* 96 144 120 33 790 KHz

SLOT TEN-4-15 Green* 137.6 206.4 172 28 790 KHz

SLOT TEN-4-16 Blue* 200 300 250 32 790 KHz

SLOT TEN-4-17 Violet* 288 432 360 26 790 KHz

SLOT TEN-4-18 Gray* 416 624 520 29 790 KHz

* Coils 10 thru 18 have a brown color dot on bottom of coil base.

Style 5 — Shielded with Ferrite Core and Sleeve

Q min Test

Part number Color L min (µH) L max (µH) L nom (µH) @ L nom frequency

SLOT TEN-5-01 Brown 0.86 2.0 1.4 43 7.9 MHz

SLOT TEN-5-02 Red 1.27 3.25 2.25 44 7.9 MHz

SLOT TEN-5-03 Orange 1.83 4.6 3.25 41 7.9 MHz

SLOT TEN-5-04 Yellow 2.48 6.4 4.5 40 7.9 MHz

SLOT TEN-5-05 Green 3.58 9.3 6.5 40 7.9 MHz

SLOT TEN-5-06 Blue 5.0 12.7 8.8 38 7.9 MHz

SLOT TEN-5-07 Violet 7.7 18.4 13.0 30 2.5 MHz

SLOT TEN-5-08 Gray 12.0 30.0 20.9 35 2.5 MHz

SLOT TEN-5-09 White 16 42 29.4 34 2.5 MHz

SLOT TEN-5-10 Black* 25 60 42.3 32 2.5 MHz

SLOT TEN-5-11 Brown* 36 90 62.8 30 2.5 MHz

SLOT TEN-5-12 Red* 48 126 87.2 42 2.5 MHz

SLOT TEN-5-13 Orange* 72 163 116 35 790 KHz

SLOT TEN-5-14 Yellow* 102 238 168 36 790 KHz

SLOT TEN-5-15 Green* 147 360 252 36 790 KHz

SLOT TEN-5-16 Blue* 215 522 312 45 790 KHz

SLOT TEN-5-17 Violet* 303 765 530 33 790 KHz

SLOT TEN-5-18 Gray* 440 1143 790 38 790 KHz

* Coils 10 thru 18 have a brown color dot on bottom of coil base.